The tradition of calligraphy has always been associated with the act of writing in Iran, and even when the writers had limited literacy, calligraphy and writing were still intricately linked. But with the advent of printing and the emergence of computer programmes and digital fonts, this art gradually declined and the emphasis on pure readability replaced the observance of both readability and aesthetics. This resulted in a decline in the appreciation of calligraphy among the new generations. The safeguarding of the Iranian calligraphic tradition thus became a major concern in the 1980s, and a national programme was developed for this purpose by non governmental organizations in collaboration with the government. This programme aimed to expand informal and formal public training in calligraphy, publish books and pamphlets, hold art exhibitions, and develop academic curricula, while promoting appropriate use of the calligraphic tradition in line with modern living conditions. Some of the work on this programme was started by the Iranian Calligraphers Association before the 1980s, and given its immense popularity, the public sector turned it into a national programme by redefining and coordinating it on a large scale based on the experiences of the public and private sectors.

Iran 2021

The word “Batik” means “drawing out with wax”. The coloured and patterned cloth has gained popularity not only in Malaysia but also in international fashion scenes. This fabric normally carries motifs that reflect the flora and fauna, geometry and landscape of nature. Terengganu Batik is renowned for its vibrant colours, bold prints and its versatility. It is soft, light and breezy and very well suited for the summer and tropical climate and its fabric is made into shirts, dresses, crepe de chine, scarves, kaftans, sarongs, pillow cases, bags, table cloths and many more items. There are two types of batik, the hand drawn and the block print. The hand drawn is based on the artist’s imagination and creativity. The artist begins by using a small pen-like container filled with hot-melted wax. It is then hand-drawn onto a white fabric with hot liquid wax creating a design. Brushes are then used to paint dyes within the outlines, thus allowing for the creation of shaded and multihued designs. The gracefulness and speed of their freehand never ceases to amaze one’s attention. It is a beauty of the highest form of traditional batik where each hand-drawn article of clothing is unique. The block print batik uses either a copper or a wooden block that looks like a domestic iron, artistically designed with intricate patterns. The block is dipped in a hot melted wax and press printed on the white cloth, which is then dyed in the colours required, rinsed and dried. Many contemporary designers also incorporate elements of this ancient craft into their colourful creations. Today, batik is not only used for outfits, but innovative commercial uses of this beautiful and artistic textile are made into bags, cushion covers, curtains, slippers etc.

The Art of making costume decorative patterns of the Mong Hoa ethnic group in Sa Long commune (Muong Cha-Dien Bien) is expressed through the technique of drawing patterns with beeswax, embroidery, fabric patching and color matching. The Mong Hoa ethnic group believe that patterns on costumes and household items will help them communicate with the gods, invite the gods to their homes, bestow good luck, and ward off evil. To create patterns, the craftsman must prepare the beeswax, use a pen to dip into the wax to draw patterns on the fabric, let it dry, dye it, and then boil it in boiling water. The beeswax melts completely at high temperatures, revealing the patterns. The main patterns are: flowers, diagonal lines, rectangles, squares, snails, diamonds, etc., giving the traditional costumes of the Mong people in Sa Long a unique beauty. The technique of creating patterns on fabric shows that the Mong Hoa ethnic group reflect the personality and aspirations of people throughout their history of development. The patterns are created on traditional costumes: dresses, belts, head scarves, leggings... with their own secrets reflecting the creativity, artistic level, and ingenuity of the Mong Hoa ethnic group. Not only painted on dresses, belts, and costumes, the typical patterns of the Mong Hoa ethnic group are also shown on daily living items such as: field baskets, cross-body bags... Each pattern represents the noble aspirations of the people. It is a valuable folk knowledge reflecting the economic, cultural, social, historical level, the mark of the times, and the cultural identity of the Mong Hoa ethnic group artisans. This is a unique folk art form in the way of creating patterns and color combinations on fabric products to create beautiful, unique, delicate, and skillful costumes that are distinct to Mong women. The Mong Hoa ethnic group in Sa Long commune always protect and promote the value of this heritage with strong aesthetic value, demonstrating their talent, delicacy, and ingenuity. Because of its unique historical and cultural values, the Art of making costume decorative patterns of the Mong people (Mong Hoa ethnic group) in Sa Long commune was included in the List of National Intangible Cultural Heritage by the Ministry of Culture, Sports and Tourism in 2017.

The Lacquerware Making in Cát Đằng was born more than 600 years ago (from the end of the Tran Dynasty) associated with festivals to worship the village's ancestors (the founders are Mr. Ngô Đức Dũng and Mr. Ngô Ân Ba) and annual ceremonies taking place on January 14-16. Rich materials: wood, rattan, bamboo, reed... The main material is lacquer processed according to a secret recipe. It takes the craftsman a month or more to complete a product. Wooden objects for lacquer are not nailed but only use mortise and tenon joints with paint mixed with sawdust. Of all the stages, the most outstanding skills/techniques of the lacquer craft are the way of mixing paint, spraying paint, gilding gold, silver, inlaying, and drawing. These are also the most typical secrets of the Lacquerware Making in Cát Đằng. To make a product of the craft village, it is necessary to have the main materials such as: lacquer, tung oil, resin, sawdust, soil... Materials for making the core (vóc): wood, bamboo, rattan. Decorative materials: gold leaf, silver leaf, pearl shell, snail shell, egg shell, etc. Tools for making lacquer: beak, bucket, earthenware pot, etc. Tools for making lacquer: steel hair, sandpaper, whetstone, broom, curtain cloth, jackfruit leaves, xoan charcoal, tangled hair, paring knife, slotting knife, iron rod, etc. Decorative tools: cat hair pen, steel hair, slotting knife, etc. Currently, in addition to traditional lacquer materials, mainly industrial paints such as PU, cashew nuts, Japanese, etc. are used, and there are many other supporting tools such as: peeling machines, quilting machines, sharpening machines, sanding machines, paint sprayers, etc. to make bamboo patchwork products. The products of the craft village currently include two main product lines: Fine lines goods (worship items) and patchwork goods (handicrafts). Fine lines products are usually made from wood with two stages: making the frame (wooden blank, attaching, wrapping, tying, jamming, lining, giving, holding) and decorating (using silver leaf, gold leaf, mother-of-pearl, snail shell, eggshell... to inlay or paint on the product including the stages: gilding, covering. After each stage, it must be polished). Patchwork products are usually made from bamboo, rattan. To complete a patchwork lacquer product, in addition to the same process as patchwork, it must go through stages such as: soaking, drying, splitting, whittling, quilting, creating product blanks, bathing, shaving, smoothing, sanding the product, jamming, sanding, drying the product, spraying paint, and painting. Today, on the basis of inheriting the traditional Lacquerware Making craft, Cat Dang artisans have been creating and absorbing new techniques and new materials to create a variety of products to serve the needs of religious activities, decoration and consumption such as thrones, chairs, palanquins, statues, paintings, betel boxes, engagement trays, gilded lacquerware decorated at relics, tables and chairs, mother-of-pearl inlaid mahogany beds, vases, lampshades, pen holders, trays, bowls... with many rich and diverse designs, suitable for the needs of the domestic and export markets. The development of Lacquerware Making in Cát Đằng contributes to solving employment, improving local social life, building a rich and beautiful homeland. At the same time, it has gradually introduced traditional values, the quintessence of Vietnamese culture in general and Cat Dang locality in particular to the world. With the historical, cultural, artistic, usage and economic values of the heritage, the Ministry of Culture, Sports and Tourism recognized "Lacquerware Making in Cát Đằng" as a National Intangible Cultural Heritage in 2017.

Traditional handcrafted textile rich in intangible cultural values, passed down for generations in Java and elsewhere since early 19th Century (Ref. Siksakanda, 1517AD), more widely since mid-1980s. all the steps in the making of batik are carried out by hand. The tools used to make batik are also made by hand. Firstly, the cloth must be washed, soaked and beaten with a large mallet. A pattern is drawn and dots and lines of hot wax are then applied to one or both sides of the cloth using a pen-like instrument called canthing tulis (direngsi/ngrengrengi). Alternatively there is the process of applying the hot wax to the cloth using stamps called canthing cap made of copper. The wax functions as a dye-resist. After this, the cloth is dipped in a dye bath containing the first colour. After the cloth is dry, the wax is removed by scraping or boiling the cloth (dilorod). This process is repeated as many times as the number of colours desired. For larger cloth, the wax is applied using a tool called tonyok (nemboki/mopoki). The details of the process vary between different areas. Batik patterns and motifs possess deep symbolism related to social status, local community, nature, history and cultural heritage. Expectant mothers wear batik; babies are carried in batik slings and touch batik with their feet when they first touch the ground; brides, marriage couples and family members wear batik; even corpses are covered with batik: all with appropriate patterns and motifs. Traditional dress includes batik, Batiks are collected and passed down as family heirlooms, each being a work of art with its own story. Batik craftspersons would fast and pray before making batik while meditating accompanied by traditional songs. It takes several days to make a hand-stamped batik, and at least 1 month to 1 year to complete a hand-drawn batik.

Indonesia 2009

Kulapheach is a daily used item such as pots, clay pots, made of baked clay. Archaeological excavations in Cambodia have uncovered many Kulapheach kilns and Kulapheach at some archeological sites such as Angkor Mean Tani kiln, Anlong Thom kiln, Torb Chey kiln, Sorsey kiln, Bangkong kiln. In Phnom Penh, there is Choeung Ek station. According to the research evidence, the oldest Pheach is found at La Ang Spean (the cave bridge) station dating to 4,000 BC. Today, despite modern technology for the production of consumer goods, traditional Kulapheach production is still available in some provinces, such as Kampong Chhnang (Andong Russey village), Kandal province (Russey Chuk village, Kaom village or Chroy Metre), Kampot province, Takeo, Prey Veng and Kampong Speu province. There are three main stages in the production of traditional Kulapheach: preparation of soil and firing; Clay soil used for Kulapheach production is from silt, or soil from a hill. First, they dry the soil and finely grind and sift only the mines. Then mix the soil with water so that it can be used to make a Pheach. There are five stages in molding Pheach and those are Pen, Reas, Bamporng, Berk, and Veay Bat. ‘Pen’ is the process of kneading the wet soil then piling it up and continuing kneading on a flat board until it has no air left in the soil. Sprinkling dried clay soil to make the kneaded soil not sticky. Next, knead the clay into long rounded pieces and continue to knead each one to form a desired shape. The second step is called ‘Reas’ or to shine which means taking the kneaded soil in Pheach shape to shine and smooth with a tool made of palm branch called ‘Tro Naes’ some called ‘Lakor’ by placing one hand claps around the Pheach and the other hand holds the inside. This method is to make the Pheach melt together, no longer see the link and no air on the surface. After that, the Pheach is ready to make a neck and mouth. The Pheach makers use their two fingers, pushing from the outside and holding the thumb from the inside, pulling it one and a half around round. In order to make the neck and mouth of the pot look more beautiful, they can use "Chea leaf” or some areas called" Chroy leaf "or" Guava leaf ", to drag the neck and mouth around. The third stage is called ‘Bamporng or inflated’ people use a tool called “Tro Naes” and “Khleong” to inflat the Pheach by hitting it gently until it gets bigger and more rounded except the edge of the Pheach mouth, the neck remains the same size. The fourth stage is called "Bourk or Opening", that is, people use “Cher Bet ka eng” if the or called "Cher Dek Khnot") drag on the shape of the Pheach to get it pleated then use a tattoo stick to draw various decoration. The final step is to ‘close the bottom.’ To center the bottom of Pheach, hold it from the inside and use Tro Naes ot hit gently from the outside around the bottom of the Pheach until the bottom stick together. To make Pheach smoother, a damp cloth is used to wipe it, except where there are pleaded spots or decorations. After the Pheach is ready, it is dried (in the shade) so that the pot hardens and it does not explode or crack during cooking. After drying, the Pheach will be baked and there are two ways to bake it: "bake on the field" and " bake in the kiln". The Pheach used to bake in the kiln are usually small Pheach, while the Pheach baked in the open air are usually large pots such as pots, pans, stoves and so on. To bake in the kiln, you need to sort the Pheach in order and it takes only half a day to bake, because the oven is closed, the heat is good, making the Pheach perfectly hard. For baking on the field, first, use firewood to lay the ground. Then arrange the Pheach on top of the firewood, cover the Pheach with straw and sprinkle a little water on the straw to make the fire last longer. In order for the fire to burn around them, small pieces of wood and straw were added between the Pheach. When baking Pheach, keep the fire burning by adding firewood and straw until the Pheach is completely baked. Baking in the open air takes a whole day. However, whether baking in the kiln or on the field, people don’t remove the Pheach immediately after it is done, they let it cool first. Nowadays, the traditional Pheach production in some areas is facing actual loss, as in the village of Kam, there are only a few families who still make Kulapheach, compared to before, when almost all the villagers earn a living through it. Nowadays, the subject of Kulapheach making is also included in the curriculum of the School of Fine Arts.

“Num Banh Chok” is an important and popular traditional food because we often see Num Banh Chok being chosen to serve guests at various festivals. More importantly, there are some festivals such as DaLean, Bon Phum, Bon Leang Neak Ta, etc. The locals who come together for the festival always make Num Banh Chok at their own houses and then bring it as “a contribution to the festival” and eat together at ceremony. As a result, most farmers know how to make noodles. The rice used to make the noodles is a kind of Ksai rice grain and a kind of hard rice. First, the rice is soaked to make it soft and easy to grind. The rice is then washed and re-soaked in water, then grind with a mortar until it become flour. The flour is too liquid to make noodle. So, the flour is wrapped in a thin cloth and pressed with stones or heavy objects to drain the water until it hardens. The flour is covered with a cloth or thin fabric and boiled in hot water, but not too hot (about 50% boiled or called Krasang shell), then the flour is extracted and hit the mortar (now made by machine) until the flour mix well. The flour is then rolled into round long pieces according to the Pen. Pen of noodles is made of copper or Tung Deng with small holes to press the flour into noodles. The flour is then put in a Pen and press on the pen, and the noodles will fall into the boiling water. As the dough falls into the pot of hot water, a stick is used to stir and cut the front of the pen hole to cut off the noodles so that they are not too long. When it is cooked enough, the noodle is taken using a basket to wash and soak in fresh water. In the last step, the noodle is extracted from the water and placed in a basket to dry. They usually do not eat just noodles; they usually eat with soup by having many types of vegetables sprinkled on top or under the noodles. There are many kinds of soups such as Somlor Bror Her (called Khmer Soup), Somlor Kari, Somlor Namya. In addition, the noodle can be eaten with sweet-fish sauce with vegetable. But for the villagers, the so-called Somlor Num Banh Chok is Somlor Bror Her, and Somlor Kari and Namya are very rare, except for those who live in the town or city.

The Hüsn-i hat is the art of writing with Islamic letters of Arabic origin by using reed pen and soot ink in a measured and proportional manner while taking into consideration of the aesthetic values. A special paper glazed with organic substances (aharlı kağıt), reed pen (kamış kalem), pen-knives, a special slab for trimming the reed pen (makta), inkwell (hokka) and pen case (divit) are the most used tools in its practice traditionally. The Hüsn-i hat is written on special paper, leather or other writing materials and it may also be applied on the surfaces of stone, marble, glass, wood, etc. by using specific techniques. Holding the reed pen and its directions on the paper by the hattat ensures the perfection and compound of letters. There are different styles of writing which have been evolved over centuries: Thuluth, jali, naskh, muhaqqaq, raykhāni, tawqi, riqā’, kufic, ta’liq, nasta’liq, siyaqat, diwani, riq’a, gubari are among the commonly preferred styles. These writing styles, using the tools and traditional craftsmanship related to the element have been transmitted through master-apprentice relation from generation to generation. The Quran, hadiths (statements of the Prophet Muhammad), Turkish laconic and poetical couplets are written with hüsn-i hat. Therefore, hattats have applied Sufistic rituals while writing hüsn-i hat. Apart from the sacred and literal works, the element also practised in state correspondences such as imperial edicts, warrants and religious and public buildings in Seljuk and Ottoman period. Today, the element is still practised in sacred and literal works and religious buildings in Turkey.

Turkey 2021

Indonesian Batik is a traditional hand-crafted textile rich in intangible cultural values, passed down for generations in Java and elsewhere since early 19th Century, made by applying dots and lines in hot wax to cloth using a canthing tulis pen or canthing cap stamp, as a dye-resist. Patterns and motifs have deep symbolism related to social status, local community, nature, history and cultural heritage. The batik community noted the younger generation’s interest in batik is waning, and felt the need to increase efforts to transmit batik cultural heritage to guarantee its safeguarding. Thus, the following is arranged. The program is collaboration between the Batik Museum and elementary, junior, senior, vocational school and polytechnic, to include education in batik cultural values and traditional handcraft in curricula as local content or subject. The project has gone on for 3 years, and continues to expand to Pekalongan District and neighbouring Batang, Pemalang and Tegal districts. Data and interviews with headmasters, teachers and students prove that the programme is popular and successful. The project is a good example of transmission of intangible cultural values to the younger generations by including modules of cultural heritage in the curricula of educational institutions. The main objectives of the programme are: To increase the awareness and appreciation of the cultural heritage of Indonesian batik, including its history, cultural values and traditional skills, among the younger generation at elementary, junior, senior, vocational school and polytechnic educational strata. To increase the awareness of headmasters, teachers, parents and the batik community in Pelaongan, regarding the importance of transmission of batik culture to the younger generations. To involve the management and staff of the Batik Museum in educational activities for students and the general public regarding batik cultural values and training in batik traditional handcraft. The priorities of the programme are: To train staff of the Museum for teaching batik history, cultural values and traditional handcrafts to students. To prepare and distribute proposal invitations to headmasters, so that they would send their students to participate in the programme. To train school teachers to become trainers in batik local content (training of trainers), and/or to place batik craftspersons in schools to give education and training in batik. To organize tests for students participating in the programme, to evaluate the results of the transmission of batik culture

Indonesia 2009