ALL
walnut
ICH Elements 24
-
Haapi Hoen-tey (Dumpling)
Hoen-tey is a special Haa Valley dish that is usually prepared during Lomba celebrations, the indigenous New Year, which are held on the 29th day of the 10th lunar month. Normally, the ingredients for Hoen-tey are prepared and cooked on the evening of the 28th day. When Hoen-tey needs to be made in large quantities, it is prepared either on the 26th, 27th or 28th day, and then on the 29th day it is cooked. Long ago, Hoen-tey was only made during Lomba celebration. Nowadays it is prepared all year round. To prepare Hoen-tey, you need the following basic ingredients. -\tBuckwheat flour -\tBunches of beet leaves -\tTurnips -\tLocal butter -\tFermented local cheese -\tGinger -\tClove of garlic -\tWild black pepper -\tChili powder -\tWalnut (optional) -\tA few stalks of green onion -\tSalt to taste
Bhutan -
Lomba: Indigenous New Year Celebration
Lomba is a popular local New Year celebration observed in the villages of Paro and Haa districts. Lomba is a celebration for the beginning of a New Year, which takes place from the 29th day of the 10th month of the lunar calendar. It is one of the most special annual occasions for the Parops and Haaps, residents of the valleys. The name “Lomba” expresses carrying good luck from one year to another. Ba literally means receiving wealth in one’s hand or to carry something forward, leaving the past behind. Lomba is celebrated by Haaps and Parops as a New Year festival from the 29th day of the 10th month of the lunar calendar. In Haa, Lomba often lasts until the 15th day of the 11th month, while Parops have a shorter celebration until the 2nd day of the 11th month. Although Lomba has been part of the culture of the two valleys for many generations, making it difficult to trace the origin. No specific written text has been found for early observances so far. According to folk understandings, some believe that Lomba began with the arrival of Phajo Drugom Zhigpo in the 13th century, while some believe that it began much earlier when men started working for food. According to Dasho Sangay Dorji (2011), Lomba observed in Paro and Haa districts may be the legacy of the Lhapas, but in some religious texts, the Lomba celebration dates to an influence from Zhabdrung Ngawang Namgyel (1594-1651) who consolidated the Bhutanese region into a state in 1649. Himself hailing from Tibet to the north, he first introduced Bhutanese to the celebration of Nyi-lo winter solstice. The day marked the end of the year and welcomed another year of prosperity with bountiful harvest. With adequate food reserve stored on the rooftop, Haaps and Parops began to recognize the day as Lomba and ushered in the beginning of the dry season of winter. Temples and monasteries in the country would have also received the annual provisions of butter, meat, rice and wheat grains on Lomba. Since then, Lomba is celebrated every year, which would make it the earliest New Year festival celebrated in any district of Bhutan.
Bhutan -
SHURBO
Skills of cooking a kind of soup with oil, vegetables, meat and walnuts. There are different kinds of soup, like khomshurbo, karamshurbo, nakhudshurbo, naskshurbo and so on.
Tajikistan -
Traditional skills of carpet weaving in Fars
Carpet weaving is one of the world's most traditional, conceptual, applied arts. Iranians enjoy a global reputation in carpet weaving and its skills; and carpets of Fars with nomadic and rural characteristics constitute a genuine example. Historically, carpet weaving in Fars province dates back to the seventh century(AH). Carpets of Fars are known as either «Qashqai» or «Khamseh Tribes» carpets. These are the nomads moving between Esfahan and Persian Gulf coasts. Among the tribes of Qashqais, the more prominent are Darre-Shuri, Kashkuli-ye Bozorg, Kashkoli-ye Kuchak, Shesh-Boluki, and Gharache. Due to the immigration requirements, the size of nomadic rugs is usually small; they are, however, beautiful. The stages of Carpet Weaving in Fars Province - Wool cutting The carpets usually utilize wool as the basic material. The men cut the wool of their sheep, skillfully, in spring or autumn. The quality of the wool on each of the eleven sections of the sheep body, and the related colors are different. - Frame(loom) Making The portable frame of nomadic carpets is rectangle in shape, with a metal or wood support; it is placed on the ground. The act of knitting is performed on it. The men construct the frame, too. - Weaving The women convert the wool into strings on spinning wheels or weaving machines. They, masterfully, take care to obtain the best qualities. The spinning wheel is a wooden tool that resembles a big spin; the wool is turned around it from the hand of the knitter, then weaved. The spindle wheel is a wooden structure with the wool being placed in its middle to turn into strings when the wheel turns. - Painting Colors are mainly natural; the main colors are laquer, painted blue, dark blue, brown and white. The plants from whichthe colors are extracted include Madder, Indigo, lettuce leaf, walnut skin, Jashyr, cherry stem and skin of pomegranate. The pigments, so called, Dandane, are elements which allow color stabilization and imprint on the fibers; the most important modants include Alum (Double Aluminum Sulfate), Green Vitriol (Cut Blue), Double Copper Sulfate, Black Vitriol (Double Iron Sulfate). - Knitting While knitting, the women tie the colored strings on the wool web to cover the frame and give shape to the carpet. Two types of ties are common: The ""Persian tie"", an assymetric tie, usually used in places where Persian Language is spoken, where it is referred to as, so called, Farsi-Baf (done in the Persian style), and the Turkish tie, a symmetric tie, in that the two webs are of the same size and the tie is made in the middle; this second tie is more popular in places where Turkish is in use, so the name Torki-Baf (done in the Turkish style). - Completion Completion refers to the activities done for final furnishing. These include sewing the sides (so called, Dowrduzi: Some products will be sewn on the sides to be used as bags, called ""khorjin's"" or ""chante's"" on the region); burning the extra wool to make the designs vivid and enhance the quality of the product (so called, Porzsuzi); double tied roots, and final cleaning. Nomadic Gilims Wraps of Fars are not painted with painted woofs; both sides of the product can be used. Limited materials have led these products to be more geometric in both texture and margin, mirroring the local culture of the community. The most important characteristic of Fars carpet weaving is the unique method of weaving without any maps. One weaver will not be able to weave two carpets of the same design, especially, if she does not enough time to consider the details. Fars carpets include the following types: Simple Gilim(one sided or two sided): A carpet made through passing the colored wool strings, called ""Pud's"" between the vertical strings, called ""Taar's"", without maps. Rug: A carpet with thinner ""Pud's"" and thicker ""Taar's"". The product is thicker in diameter, compared to Gilim's, and is one-sided. Ghaaliche: A rug of smaller dimensions (measuring to less than three square meters). Jaajim: A product of woolen ""Taar's"" and ""Pud's"", with simple and attractive designs, and a variety of usages, including those of carpets, beds, pillows, etc. Gilim-e Naghsh-barjaste(Goljajimi Gilim): A one sided gilom with its main motifs embossed. Somak (Rendy): A one-sided Gilim, out of which ""Ghali's"" (rugs) are believed to have been evolved. Shishe Derme: A Gilim with a simple pattern; it has no knots and naps, is two sided in a way that the mirror patterns of its face are weaved on its back side. Gabbe: A gross nomadic carpet, vastly verified, and done without any map. There are both colored Gabbe's, and Gabbe's of natural colors. So called, ""Shiri"" Gabbe's of Fars mark nomadic courage for the owner.
Iran 2010 -
Traditional skills of carpet weaving in Kashan
The carpets woven in the city of Kashan can be defined as follows. Spreadable hand-woven materials consisting of a basic structure of strings made of cotton or silk interwoven in millimeter scales known as warp (Tar or Toon) on an erected framework known as ‘Dar’, while by means of wool or silk strings, and based on a colored design, appropriate knotting in harmony with the delicacy of the carpet are created on the surface. In the weaving style of Kashan, after each row of knots, cotton strings are extended two times from within the warps in horizontal direction known as ‘woofs’. Woofs are divided in two categories in terms of thickness: thick woof or under-woof is almost of the same thickness of warps, while thin woof or top-woof is as thick as reel strings. These woofs are pressed on woven knots by means of combs and make the carpet more strong and delicate. This style, known as Farsi weaving has a background of four hundred years in Kashan which is the pioneer of this style. The skills and elements involved in the process of production of these hand-woven carpets can be divided in certain categories: Carpeting Tools: 1- Weaving frame: is a wooden or metal framework consisting of two vertical columns and two horizontal beams. In addition, certain wooden accessories are used to reinforce the frame (wedges), while in metal frames, knots and jacks are also used. In order to control and move the strings in the course of weaving, two thin layers of woods are used. 2- Comb: is used for pressing the woofs after each row of weaving to make the carpet stronger and more delicate. 3- Stick: it is a metal belt with the width of 2 centimeters and length of 60 centimeters used to lead the woofs from among the warps. 4- Scissors: for cutting the tips of the woven strings after a number of rows as well as for leveling the surface of the carpet. 5- Bench: as a seat for the weaver, made of wood or metal. Carpeting Materials: 1- Warp: prepared multi-layered cotton or silk strings in proportion to delicacy of the carpet and required by the design will establish the basic structure of the carpet. In Kashan style, the warps are drawn on the ground and mantles on the frame. 2- Khameh: woolen two-layered colored strings in various sizes for knotting to warps in 90 degrees angle which serve as the thickness of carpet in appropriate sizes. 3- Woofs: cotton strings in two thicknesses: thick woofs equal in thickness with the warps, and thin woofs as thick as ordinary reel strings which are led through the warps after each row of weaving and is pressed with comb which strengthens the carpet. In full-silk carpets, silk woofs are applied. Design: in order to prepare the design of the carpet, which is the most artistic activity involved in carpeting, certain rules are followed, the most significant of which can be summarized as follows: A) Drawing is the general form and the first impression of the carpet which makes the basic design of the carpet in the first glance. The procedure that is followed in Kashan is as follows: 1- Lachak-Toranj design: is this design limited by a background cadre and consists of a central oval shape known as Toranj and rectangular surrounding shapes known as Lachak. Each Toranj has four surrounding Lachaks. Sometimes, the Toranj is in circular form, known as Shemeh. Lachaks are normally in harmony with Toranj. 2- Toranjafshan Design: the design consists merely of a Toranj in the middle covered with symmetrical flower and leaf designs, without Lachak. If the surface is without flowers and leaves and other forms, the design is known as simple Lachak-Toranj. 3- Lachakafshan: There is no Toranj in the design, only four Lachaks around. The remaining portion of the design is covered with flowers, leaves, and other symmetrical shapes. 4- Mehrabi Design: The surface is normally without Toranj. Only to Lachaks are located on the top corner, with ornamental religious designs. The surface is simple with an urn or columns around. 5- Overall design: a basic design theme is repeated all over the surface. Single forms such as Botteh-Jegheh, scattered bouquets, frames, flowers, etc are repeated over the surface. 6- Koomeh Design: short scattered trees together with birds and animals. B) Design is the combination of drawings, paintings, flowers, leaves, branches, animals and other forms which enliven the basic drawings by applying colors, each with its respective artistic identity inspired by nature, buildings, historical events, movements of living animals, and background mentalities of the designer and painter. Dyeing: Colors and dyeing materials: natural colors are more popular in Kashan, such as Ronas, walnut skin, pomegranate skin, vine leaves, etc. except for Ronas, other materials are among the waste natural materials. The masters of dyeing create very stable and beautiful color mixtures by using various types of natural pigments. Farsi weaving style also known as asymmetrical knotting is applied with exemplary delicacy in Kashan so that the back side of the carpet is made with equal longitudinal and latitudinal knots.
Iran 2010 -
Zhugdre phunsum tshogpa: Ceremonial seating
The phrase in Dzongkha literally means ‘seated in the rows’ whereby participants are seated in rows at the ceremony, which is called zhugdre phunsun tshogpa. The zhugdre ceremony originates from the tantric teachings of Buddhism and has been adopted to be performed during happy and auspicious occasions. Phunsum tshogpa means grace, glory and wealth combined to represent the three essences of happiness. The ceremony begins with a general invocation to the higher beings that have helped shape the destiny of the kingdom and made it a land of peace and tranquility. Their powers and blessings are sought for the acquisition of the triple attributes of grace, glory and wealth. The ceremony is held during important functions to mark such occasions as promotion, marriages, visits of high dignitaries and consecration and inaugural functions for new buildings and enterprises. For the zhugdre ceremony, participants are seated in order of rank and seniority. The dignitary who is being honoured sits at the head of the row, usually facing all the participants. Once everyone is settled, different items of offerings are made first to the shrine and then to the dignitaries and participants. The first offering comprises the sweet root known in Bhutan as droem (in Sanskrit,kesar) and fragrant saffron water (drizang) and tea with saffron rice. This is followed by the offering of marchang and chagep (token money), and other food items such as zhugdre offering. Zhugdre begins with doma (betel nut) and paney (betel leaf ) and then a fruit that grows on a tree high up from the ground to signify the importance of the occasion. The number of items can range from 11 to 21 or as many as can be afforded in terms of time and resource, but they must end in an odd number and with a hard item such as walnut or chugo (dried cheese) to signify indestructibility by malignant spirits. Prayers are recited while the offerings are being distributed. In Bhutan, the beginning of zhugdre ceremony dates back to 1616 when Zhabdrung Ngawang Namgyal, arriving from Tibet, was received with a zhugdre ceremony by Lam Druk Namgyal of the Obtsho family at a place called Lebnathang in Gasa District. Then at the consecration of Punakha Dzong, an elaborate zhugdre phunsum tshogpa was performed and the ceremony gained immense popularity thereafter. In order to receive what is being served during the occasion, participants are expected to bring their own phop (bowl) and torey (small piece of cloth, usually white, to receive food items) to the ceremony to receive what is being served during the occasion. The final stage of the zhugdre ceremony, known as trashi moelam, is a prayer for the good health, wellbeing and prosperity of the dignitaries and those present on the occasion. It is designed to help guests accumulate merits in order to attain the highest qualities of which man is capable, in this way benefiting not only those present on the occasion but also all sentient beings.
Bhutan -
Thagzo: The Art of Weaving
Thagzo or the art of weaving is one of the oldest and widely used skills that have been practised for ages. The all-encompassing use of textiles represents prestige, artistic skills, discipline, determination, familial sentiments, tangible form of asset, and expressions of devotion towards the dharma. Bhutanese textiles are the product of knowledge and skills developed and nurtured over centuries of experiences and family traditions. Our textiles are valued and renowned for their richness of colour, sophistication and variation of patterns, including the intricate fibre preparation, dyeing, weaving, and embroidery techniques. This rich and complex art of weaving is an inseparable part of our culture and history. Today, the wide availability of imported fibres and dyes are transforming the palette, textures, and surface qualities of the clothes produced. There are more than eleven types of yarns and dyes including the five main colours (white, yellow, red, green and blue) and six subsidiary colours (orange, dark green, light yellowish green, pink, light white, blue and black). These different colours are woven in accordance with different designs and patterns. Women from central and eastern regions of Bhutan are famous for their weaving skills and each region produces their own specialty. a. Weaving with Designs and Patterns: Every textile product has a name that expresses its particular combination of colour, design, pattern and fibre. Weaving pattern is either stripes - vertical for men, and horizontal for women in cotton, silk or wool. Required extra designs are made by adding warp threads. Patterns like the vajra (thunderbolt), the swastika, the tree or the wheel, each has symbolic meanings. Although the symbols used in Bhutanese textiles are primarily of geometric nature, they also have deep religious meanings. Some common geometric symbols include the dorje (Vajra), the drame (nets), the phenphenma (butterflies), the phub (Kiliya), the yudrung (Swastika), and the shinglo (leaves). The drame or the eternal knot is a classic Buddhist symbol. The phenphenma is a symbol of butterfly and the eight-pointed star, while the dorje or the thunderbolt represents the indestructible powers of Buddhism. The phub or the rainbow is a triangle pattern in successive rainbow colours. When dorje symbol is incorporated within the phub symbol, the pattern becomes dorje\u0002phub. The shinglo symbol is used mostly on the royal and noble family dresses since this symbol is the most difficult to weave. The shinglo symbol represents the “tree of life”. The therpochay ( Jana chagri) or the China Wall pattern is usually seen next to the phub design on kiras. The therpochay symbol is believed to have been derived from the designs on Chinese brocade. The yudrung portrays the crossroads where the four directions meet. A yudrung represents the balancing forces of the universe, when rotating. The yudrung is an ancient pattern and its epicentre is considered a spiritual place. Yudrung is depicted on the royal thrikheb as the centre most design. Bhutanese weavers usually weave two types of textiles; the plain woven meaning kar chang, and the pattern woven textile called metochem. These are described below. a.1. Karchang: The plain woven textiles include pangtse, mathra, sethra, adang mathra, shardang thara, and pe sar. Plain woven clothes are worn at home or work since they are cheaper than the pattern-woven clothes. Mathra (red pattern) is a varicolored plaid woven on a maroon or red field, sometimes woven with stripes (khaja) at the edges. Sethra (gold pattern) is a plaid weave usually with yellow or orange field as the dominant colour. Sethra has two popular colour combinations; red with black or blue plaid on a white field; and yellow, white and black on an orange field. Sethra dokhana consists of black colour in it while buechapgi sethra does not contain black. Thara has horizontal stripes with white as a dominant field. Shardang thara has multicoloured stripes while Samkhongma have narrow red-and-blue stripes, and Mondre which has a similar pattern to Samkhongma is worn mainly by older people in rural areas. Kamtham Jadrima is a striped textile with colours of the rainbow. Kamtham thara consists of simple warp stripes or plaids, which are gifted to a religious person. Pesar (new design) is a modern innovation with small patterns in striped plain cloth. Yu tham or the country cloth which is made of wild silk or cotton is very popular in the rural areas. Kawley is a completely black fabric of wool, which is believed to have healing properties. a.2. Meto Chem: Aikapur and Ku shu thara are the two specific kinds of pattern-woven textiles. Pattern-woven clothes are considered special, and are valued and saved for special occasions like festivals, marriages and for New Year celebrations. Bhutanese weavers weave many different types of clothes with intricate designs such as leaves, birds, trees and other animal patterns. These are briefly explained below. Aikapur: Aikapur is a textile woven of cotton or silk, and appears to be embroidered. Aikapur has double faced pattern bands called hor which alternate with rows of plain weave; with always an odd number of legs ‘kangpa’ or cross hatches. A textile is referred to as a b-sampa (with three legs; b-napa (with five legs); b-zumpa (with seven legs); b-gupa (with nine legs); b-songhthurpa (with eleven legs); and b-songsampa (with thirteen legs). Aikapur is differentiated by the colour of the background thread, and the supplementary thread used. The common colours used in aikapur are: dromchu chema, literally meaning ‘little boxes’, with red, green, yellow, and white pattern bands. Mentse mathra is a material with a yellow base, and with red and green stripes. Montha has a blue or black background with red pattern bands between colourful stripes. Lungserma has green and red pattern bands on a yellow background. Shinglo or ‘tree of life’ patterns made on the fabric are used to assess the quality of an aikapur. The delicate branches and leaves of these trees are inspected when judging the quality of a textile. Kushu Thara: Kushu thara used to be considered aristocratic and the most prestigious dress for women. Ku shu thara is woven from vegetable dyed cotton and raw silk (bura) or entirely from silk. Ku shu thara has spectacular brocade design which take up to a year to weave. Ku shu thara is always embellished on a white base, and a similar kira with a blue or black background is called ngosham .Sapma, the continuous weft patterns, and tingma, the alternative weft patterns are used as base pattern for kushuthara, ngosham or shinglochem. Shinglochem can be either a gho or a kira, woven with alternate rows of warp pattern bands. b. Weaving Materials: Bhutanese produce fibres such as raw cotton, wool, nettle fibre, yak hair and bura (raw silk). The most expensive and the most valued fibre in Bhutan is raw silk. The Bhutanese do not kill the silk worms that remain inside after spinning its cocoon, but are left until they escape, which breaks the thread before it is unrolled. That is why, Bhutanese raw silk feels and looks relatively coarse compared to Indian and Chinese silk. Several types of yarn like seshu (cultivated from mulberry silk moth Bombayx mori), bura (produced by wild non-mulberry silk moth), namdru kuep (parachute silk), and varieties of silk imported from India are notable. b.1. Nettle: Nettle or stinging nettle, though now rarely used, is said to have been the original and chief fibre used by weavers in ancient Bhutan. Nettle fibre is coarse but strong and durable. That is why people in villages used it to weave sacks, bags, kurel, pagi, pakhi, bundi and tabden. Owing to its strength it is also used as bow string. Nettle is herbaceous flowering plant that grows in temperate and sub-tropical zone. The plant grows up to 2 meters in height with spiny stems and leaves and bears white to yellowish flowers. Nettle bark contains baste fibre which is strong, smooth and light. In Bhutan, nettle fibres are harvested in the months of October and November. After peeling the stems, the fibres are dried, and then cooked with ash for about 6 hours. The fibres are then washed with cold water, and beaten in order to remove the outer cover. After removing the outer cover, the fibres are dried and dyed with natural dyes. The nettle plants are shredded, and twisted into thin fibres using a drop spindle. Nettle fibres are used to weave bundi or carry bag. Bundi is usually woven with brocaded yudrung motif at the centre of the middle panel, on a white colour base. The bundi or carry bag consists of three lengths of cloth sewn together to form a square panel. Ropes on the diagonal sides of this piece are tied together to carry possessions and bedding. b.2. Wool: Yarns from yak, sheep and goat wool are spun using phang (drop spindle) and moved to a chaphang (spinning wheel). The herders of the high valleys of Merak and Sakteng weave shingka (tunic-style dresses), women’s jackets and belts. They also make hats, ropes, tents, and bags out of yak hair, and floor mats and blankets from sheep wool. The Layap women’s dress includes a black woollen jacket, a long woollen skirt, adorned with lot of jewels, which often include teaspoons. Women also wear conical bamboo hats with a bamboo spike at the top, held by beaded bands. Shingka, an ancient tunic-style textile that was woven with either a ngoshingkha (blue) or a laushingkha (red) wool base, was worn by a high lama during religious ceremonies. Char khab, woven from wool (of yak or sheep) either on a pedal loom or back strap loom is used for protection from snow, cold, and rain. It is water-resistant and an essential item for the herders in cold the region. Sephu charkhab (rain cloaks from Sephu) is a colourful textile with bands of green, blue, white and orange. Bumthang and Trongsa were known for a woollen fabric called yathra, which was used as a cover from rain and cold. In the late 1990s, farmers in Trongsa had stopped raising sheep which inevitably put an end to the practise of weaving yathra. Yathra is used as bed covers, blankets, rain cloaks, cushion covers, sofa set covers, and as jackets for both men and women. b.3. Cotton: Kershing (cotton) is used to separate the cotton seeds, and then fluff out to make it ready for spinning into yarn with the help of a wooden spindle or spinning wheel. Usually cotton woven with traditional designs on white background, chagsi pangkheb was put on laps to wipe hands before and after meals by persons of higher positions. In the early days, Bhutanese women used to put on an apron-like wear called dongkheb as a sign of respect while approaching the king or a high official. Phechung is a cotton woven carry bag woven but its usage is now limited to ceremonial receptions along with chagsi pangkheb. Thrikheb (throne cover) is a rare textile used as the King’s throne cover. It is also used for the lamas during religious ceremonies. Chephur gyaltshen (banner with frills), gyaltshen (pair of cylindrical hangings with valance), bumgho (bumpa covers), kheb and tenkheb (altar covers),phen (pair of triangular topped hangings) and chephur (a pair of cylindrical hangings) are some of the other cloth products that are used in altars and monasteries. Hingthub is a time-consuming but highly cherished textile woven for loved ones or for use by the weaver or their ‘lord’. The finer product demonstrates the dedication of the weaver. It is also used by the weaver’s family or to stitch outer attire for statues or as wall hangings. Today most of the yarns for weaving like raw silk, cotton and acrylic are imported while some of the yarn is spun and processed locally. The availability of cheap machine spun yarns from India has overtaken the local cotton cultivation. b.4. Types of Loom: There are three types of looms used by weavers in Bhutan. Traditionally pangthag was the most commonly used loom for weaving larger size garments. The smaller version of this loom called kethag is used for weaving narrow items like belts. In the 1970s, another type of loom called thri-thag (khri-thags) was adopted from India. This loom gained popularity in the growing urban centres. This later type is a horizontal loom with pedals. Each region has a speciality in terms of designs and types. Kurtoe is known for Ku shu thara, while marthra and serthra are mostly produced in Bumthang. Trashigang district is well known for weaving aikapur, while pangkheb and montha come from Kheng. b.5. Dyes: Bhutanese weavers consider the coordination of pleasing colours more important than the designs, patterns and techniques. Strong taboos are associated with the dyeing process and the weavers are very particular about colour shades. They believe that malevolent spirits, certain weather conditions, strangers or pregnant women can ruin the dye. Like the weaving techniques, the recipes for dyeing are closely guarded family secrets and the formula is usually passed down from mother to daughter. There are a number of dye-yielding plants. Weavers obtain dyes using simple methods from barks, flowers, fruits, leaves, and roots of plants, and minerals. Today, chemical or synthetic dyes called tsho-sar are easily available while the natural dye is called tsho nying. They are easily recognisable by their hue. Some of the natural dyes obtained from plants are described below. - Indigo: Shades of green, purple, blue and black are obtained from leaves of trees locally called yangshaba (Strobilanthus flaccidifolius) in Tshangla dialect. Indigo (lndigofera spp.) plants are cultivated in household gardens as a source of blue dye. Alum earths, sour fruits, and dug shing (Symplocos) leaves are used as a mordant in dyeing to fix the colouring matter. Indigo plant leaves are fermented for two weeks, and then passed through acidic ash water. - Lac: Jatsho (Lacifer lacca) is an organic dye that produces colours ranging from pink to deep red. Lac is boiled in water until it becomes sticky dough. The pulp is mixed with roasted wheat and allowed to ferment for 10 days. The selected yarn is then put into the boiling mixture until the colour gets absorbed. Churoo (Phyllanthusemblica) is used as a fixating element in dye. - Madder: Dried stems and leaves of madder called tsoe (Rubia cordifolia) are chopped into small pieces. This material is boiled together with the yarn to produce several colours ranging from pink to deep red. It is good for dyeing raw silk, cotton and wool. Madder can be preserved in dry place for years. The ripe berries of berberis, locally called kepatsang (Berberis aristata) are used as a source of red colour, while the barks of nut of the walnut tree can be used to obtain orange colour in woollen yarns. - Pangtse: Leaves from pangtse shing (Symplocos paniculata) are gathered from the forest, which can be used fresh or dried, to make yellow colour .Pangtse leaves are boiled in water along with woollen yarns. The yarn is then allowed to drip. Sometimes, yung ga (Curcuma longa) or turmeric is also used to obtain a bright yellow colour. Lemon, also called churoo (Emblica officinalis), variety of other berries, herbs, plants, and roots are used along with alum mordant to boost colours in the yarn. However, since dyed yarns from India are available at cheaper price, only a few Bhutanese weavers practise the tradition of natural dyeing processes these days.
Bhutan -
Traditional skills of crafting and playing Dotār
The element is recognized as one of the main elements of cultural and social identity for the regions in which it is crafted and played. The bearers and practitioners are mostly farmers including men as crafters and players and women as players, and recently a number of them are young researchers of both genders. Its traditional knowledge of crafting and playing is informally transmitted through generations by the master-student method. This element is seen in local, oral and written literature (including local poems, proverbs, chants and lullabies) which constitute a part of nature, history, and background of the bearers. As this element is shared by a number of communities, groups and individuals, it brings mutual respect and understanding amongst the communities concerned. Dotār is a folkloric plucked-string musical instrument that has been played in social and cultural events/spaces such as weddings, parties, celebrations, ritual ceremonies etc. Dotār has a bowl which is pear-shaped and made of dried wood of dead mulberry tree and its neck is made of apricot or walnut wood. It has two strings traditionally made of silk which been replaced with metal wires nowadays. Some believe that one string is male and functions as accord and the other is female which plays the main melody. The crafters also repect nature as they use dead and dried wood for making Dotār. It is not in opposition toward the national and international instruments like Universal Human Rights Declaration, sustainable development , etc.
Iran 2019 -
Art of crafting and playing with Kamantcheh/Kamancha, a bowed string musical instrument
The art of crafting and playing with Kamantcheh/kamancha (“little bow”), a bowed string instrument, has exsited for more than 1,000 years. In Iran and Azerbaijan, types of this art constitute major elements of classical and folkloric Music. Classical Iranian Music refers to the urban music with “Radif” repertoir; the Folkloric Kamantcheh Music refers to the mainly rural musical traditions of Azarbayjan, Lorestan, and Torkaman Sahra. In both countries, contemporary practitioners mainly make and use four string Kamantcheh/kamancha composed of a body (chamber, neck and pegs) and a bow with horse-hair. Some Folkloric variants with two or three strings are also popular in Lorestan, Azarbayjan, or Torkaman Sahra, Iran(also, cf.D). Craftsmanship starts with choosing wood material. Craftspeople use walnut and/or mulberry for the body, and cornel for the bow. In Azerbaijan, only ball-shaped resonating chambers are crafted. Iranian communities produce the following resonating chambers/sound-boxes: 1-Pošt-baste(""closed in the back""):A hollow oval with sheep-skin; 2-Pošt-bāz(""open in the back""):A half-cone, with sheep-skin on one end. Craftspeople create a bowl and a round fingerboard, and unite them with an iron billow that ends up with a base shaft at the bottom. The chamber’s open side is covered with sturgeon, catfish, sheep or bovine bubble skin. They very often inlay the body with mother-of-pearl or other materials to express and mark different motifs and add their personal touch to the external decoration. In Iran, calligraphy, wood carvings, or inlayed jewels and shells are also practiced. The instrument rests on the base shaft and stands vertically on performer's lap or beside them; performers move the bow horizentally on the strings, and pivote Kamantcheh round the shaft to facilitate transfers on the strings. Kamantcheh/kamancha produces strong and subtle sounds, close to human voice with the sound diapason ranging from small octave ‘A’ to the third octave ‘A’. Players perform large works and etudes using various performing techniques, individually or as part folk orchestras. Generations of performers have left invaluable heritage of Kamantcheh/kamancha works, which are reproduced by young performers, adding their own playing dynamics and colouring. Transmitted from generations to generations at professional and amateur levels, within families or professional education institutions, this art brings together a large community of Kamantcheh/kamancha music lovers and listeners and continues to be a marker of cultural belonging.
Azerbaijan,Iran 2017 -
Wood carving art
The art of wood carving in Uzbekistan is part of the Central Asian artistic heritage and its origins date back to ancient times. In the traditional architecture and life of the peoples of Uzbekistan for a long time, carved wood was very popular. In architecture, it was used as important architectural details and structures such as columns, cornices, doors, ceilings, and gratings. The use of carved wood in everyday life, or as it is also called household carving, absorbed a wide range of objects from furniture to small household utensils. Local wood species were used as a material: plane tree, elm, walnut, juniper, here, apricot, poplar, tal, pear, quince, cida, which differ in a variety of texture and pattern. When decorating various household items, furniture and musical instruments, the craftsmen used ornamental carving, painting and inlay. The main centers of woodcarving art are Khiva, Urgench, Bukhara, Samarkand, Tashkent, Qoqand, Margilan, Andijan, Fergana, Shahrisyabz etc.
Uzbekistan -
Traditional knowledge in making musical instruments
There are many musical instruments in Kyrgyzstan. The most iconic is the komuz, a three-stringed instrument resembling a small guitar. The body of the komuz is made of a whole piece of apricot or juniper wood, and sometimes of walnut or redwood. The tool head of the instrument has three wooden hitch-pins to which ends of strings are attached. The other ends of strings go to a bridge located on the table (deque) right in front of the tone-hole. Mutton guts were used as strings until recent times. The length of komuz is no longer than 85- 90 sm. Alternatives of the tuning of komuz is one its unique features, which are, in their turn, linked with a chosen type of musical composition. It is played by hands. Kyl-kiyak (or kiyak) is a stringed instrument with a bow. It is made of the same woods as the komuz. The instrument has two strings. It is a ladle-shaped instrument with an open upper half; its lower part is covered with camel leather. The length of kiyak is no longer than 70 sm. Untwisted horsehair is used for strings and bow. The fiddle for the bow is made of a specific plant, meadowsweet. Temir komuz is a mouth plucking instrument made of the metal only (temir - metallic). It is U-shaped and 6-7 centimeters long. Materials used to make it are brass, bronze or copper. The metal reed is fixed in the middle of a “plug” of the instrument, which is held by fingers of the right hand. When played, temir komuz is held near the mouth, which is a natural resonator. The whole performing apparatus, including lips, voice box, hands, and even lungs of the musician, is used in each tone. Chopo-choor (clay chor) is an ancient wind instrument. At present, it is spread in a ceramic form and has a regular oblong shape of 20 centimeters in length and 8 centimeters in width. Performer holds it with lips and fingers holes that are arranged along the length of the instrument. Dobulbash is a national percussion instrument, representing one-sided drum, which is covered by the leather. Height of its corpus, which is cut out of a juniper, is no longer than 60 centimeters; diameter of the membrane, which is covered by camel’s leather, is 25-30 centimeters. Notes from the drum are elicited by the tail point of the Kyrgyz whip (kamchy) or palms. The instrument sounds loudly, resonantly, and lastingly.
Kyrgyzstan -
TABAQTAROSHI
Traditional folk craft related to making big plates with wood. Except of plates masters make wooden spoon, skimmer and etc. For making wooden plates masters take wood of willow or walnut tree and applying in a electrical tool cut and plane it.
Tajikistan