For thousands of years, nomadic herders of Mongolia roamed across the country-side from season to season. Dry, windy areas close to rivers are best for summers while areas away from river-bank wind and close to mountains or hills are best for winter stays. In the country where pasture always was and still is a public domain, the herders moved freely to the best locations for the season. With this lifestyle of freedom of movement and pastoral animal husbandry was invented the national dwelling called the ‘Mongol ger’. It is a round structure of easily dismantle-able walls, polls and a round ceiling covered with canvas and felt, tightened with ropes. The ger was designed to be light enough for Mongolian nomads to carry, flexible enough to fold-up, pack and assemble, sturdy enough for multiple dismantling and assembling as well as easy for regulating temperatures within. Over many centuries the mongol ger was modified into a perfectly aerodynamic structure which can withstand Mongolia's fierce spring winds ranging up to 18-20 meter/sec. It can be dismantled in half an hour and assembled in an hour by a small family with 2-3 adults. The Mongol ger has many varieties. The most common “5-wall ger” consists of five lattice segments forming a circular wall, a door, a toono (round window ceiling), two bagana (columns that hold the toono), and 88 uni(long poles that connect wall lattices and toono which forms the roof of the ger). There are also several accessories attached to the ger.

Mongolia 2013

Wood-carving. Process of carving ornaments in the wood, stone, plaster, animal bone and etc. This craft is used more in the contrition of buildings and decoration of doors and windows.

Wood carving and wood product manufacture among the Kyrgyz originated in ancient times. An example is the manufacture of wooden parts of the yurt, komuz, which have become the pinnacle of the handicraft creativity of the people. Modern travelers are very familiar with the Kyrgyz yurt, construction of which is made only of wood by the true masters. Wood items decorated with carvings and paintings have been harmoniously fit into the complex of interior of the yurt. These are chests ‘sandyk’, wooden bases on which felt mats, carpets and bedding items are placed; coffrets for food, cloth and horse gear hangers ‘ala bakan’; boxes for dishes, stirrer for kymyz ‘pishkek’, biler for drinks and other liquids, wooden blocks for lamps – ‘chirak paya’. Woodworks are done by the men named as ‘jygach usta’. Materials used for different woodworks depend on elasticity or firmness of the wooden species: birch, cottonwood, sump-weed, juniper or nut-tree. They are cut easily and flexible enough to get desired shape. Instruments used in woodworks are: saw, adze, single bitted axe, knife, hewing with blade in the form of groove, hatchet with plane, wood auger, strop used to make walls of the yurt.

Phù Khê village has long been famous for its wood carving: "Hanoi embroiders fans and flags; Phù Khê carved a throne to worship the king. The person who is considered the founder of the craft and is credited with teaching the wood carving profession to the people of Phù Khê is Mr. Nguyễn An. Every year on January 7, craftsmen from craft guilds in the village gather to celebrate the death anniversary of the Craft Patriarch. Saws, planers, sharpeners, chisels, and various-sized straight chisels are among the instruments used in wood carving. Wood is a plentiful raw material that is dependent on the needs of the consumer and the product's price. Roughing, or horizontal working (cutting, sawing, and chiseling); rough touch; and fine touch are the three stages of the production process. The unique and trademark technique of the craft village is the dragon carving technique. In Phù Khê, there is a saying that partly shows the difficulty of the carving technique: "One wood, two people, three clouds, four animals" (the most difficult is carving trees, the second is carving human figures, the third is carving touching the cloud, the fourth is touching the beast). Decorative patterns carved according to the motifs of lotus, chrysanthemum, buddha's hand, orchid, and four precious flowers including "pine, chrysanthemum, bamboo, apricot", "dragon, unicorn, turtle, phoenix", "intellectual, farmer, industry and trade", etc. The craft village has two types of products: traditional products (dragons, statues, animals) and fine arts products (tables, cabinets, tables and chairs, incense burners, screens). Famous products of Phù Khê village are statues, horizontal panels, parallel sentences, incense burners, dragon mosaics, dragon pearls, etc.

Jimzo is a traditional art of forming religious images. Jim means "clay" and Zo means "art", literally "clay art". In Bhutan, it can be traced back to the 7th century, to the time of Tibetan King Songtsen Gampo (569–649?), who is believed to have built 108 Lhakhangs (temples), under which the pioneering Buddhist temples such as Kichu and Jampa Lhakhangs were built. Various clay paintings from different centuries, beginning with the time of Guru Rinpoche, attest to the existence of clay art in Bhutan much earlier. In the time of Terton Pema Lingpa (1450-1521), this art became popular. Towards the end of the 17th century, the art was codified and included by the fourth Desi (temporary ruler) Gyalse Tenzin Rabgye (1638–1696), as one of the thirteen arts and crafts of Bhutan. Later, at the time of Zhabdrung Ngawang Namgyal (1594-1651) in the 17th century, a very skilled sculptor named Trulku Dzing was invited to Bhutan. Trulku Dzing erected numerous clay figures in Punakha and Wangduephodrang Dzong. The art was later codified and included as one of the thirteen traditional arts and crafts of Bhutan by the 4th Druk Desi (temporary ruler) Gyalse Tenzin Rabgye in the late 17th century. Since then the art of sculpting has been maintained and passed from teacher to students over many generations until today. Bhutanese jim zop (sculptors) are known for the quality and intricacy of creating delicate clay sculptures. They practice sculpting as a pious act since it is based on the iconographic principles of Buddhist art. It is very important to adhere to the rules that prescribe the precise measurement of the body structure in relation to the limbs, postures, eyes, ears, fingers and nose and the body tints, garments and ornaments. a. Religious Statues and Ritual Objects: Sculptors make clay statues, ritual objects and tsha tsha (miniature clay stupa) and clay masks worn during festivals. Numbers of exceedingly fine and intricate religious sculptures and ritual objects made of clay can be seen in every temple, monastery, and the dzongs of Bhutan. These clay sculptures vary in sizes, varying from tiny statues to over twenty feet. There are clay sculptures of the Buddhas and Bodhisattvas, various deities, gods, goddesses and prominent religious figures which depict the foundation of faith, worship and reverence for the Buddhists. b. Types of Clay used in Sculpting: Clay is the basic material for making sculptures. A special kind of clay can be found deposited in small quantities between mud and gravels usually in marshy areas. Sculptors use the best quality clay as the images and objects they make must stand against the change of weather for generations. Clay is processed into three different forms; tsa dam, kong dam, and jim dam. Each one is used for a specific purpose. Tsa dam is made by mixing clay powder with daesho (paper made from daphne plants) in the ratio of 7:3. If paper is not available, pulps made from the raw bark of daphne plant are used as substitute. This mixture prevents the mud from disintegrating when dried. Tsa dam is used for moulding the basic structure of the statue. Kong dam is prepared in the same way as tsa dam, but by adding more water to make the clay relatively thinner and softer. Kong dam is applied over the basic structure moulded from tsa dam to give proper shape to the statue. Generally the proprietor adds any or all of the seven precious substances (gold, silver, and turquoise, and coral, pearl, bronze and any other precious stones) to tsa dam and kong dam in order to increase the aura of the statue. Jim dam is applied as the final and finishing touch to the statue. To prepare jin dam; the clay powder is mixed with water and then stirred thoroughly until it turns into a thin paste. It is then filtered with the help of a thin cloth. The thin filtered paste is collected in a utensil and then placed on fire until the water component is evaporated. What is left in the pot is a very fine powder. This powder is then mixed with daphne papier mache to give it the binding strength which prevents the clay from cracking. This mixture is again mixed with water and stirred and applied to give the final touches to the statue. c. Process of Clay Sculpting: Clay sculpting process starts with the measurement of the space available where the statue will be kept later, or the size required by the owner/sponsor. Accordingly, the basic structural frame is made by using copper wires for smaller statues, iron or steel rods for bigger statues as support. Steel rods are wrapped with copper wire to add the value of the object. Gold and silver wires are considered the best to make the basic frame. The frame is added with tsa dam while the internal part is left hollow for zung to be inserted later. When the tsa dam on the structure dries perfectly, kong dam is applied over it to give all the external physical features, forms and the attires. The parts such as hands and head are made separately and attached later to the body for smaller statues, though the head of bigger statues are made directly with the statue. The sculptor must ensure that the parts made separately are proportionate to the whole structure. Any part of the statue that is not proportionate to the whole body is considered an impious act of the sculptor and therefore must be avoided at all cost. Sculpting is a tedious job, requiring the sculptor to apply the wooden chisel again and again to fill any gaps or remove the lumps over and over again. The statues are left for a long time to allow the clay to dry naturally, and to develop minor cracks which are also left unrepaired to allow air to pass for rapid drying. When no more cracks appear, it means the clay has dried up completely. The cracks are then repaired with tsa dam by mixing with glue. Once this is done, the sculptures are ready for final layers of finishing using jin dam. At this stage the sculpture is finally ready for zung (the inner relic). Learners have to undergo rigorous training for several years under a master sculptor known as Jimzo lopoen. As sculpting for religious purpose is considered a spiritual act, sculptors have to choose the most auspicious day and time to start a project. Once completed, an expert (usually a monk) will insert a zung shing or sog shing (a strut inside the statue as its backbone) and zung consisting of written mantras and other precious substances. Then the statue is painted using appropriate colours. Upon completion of all these steps, a drub or rabney ceremony is conducted by an accomplished lama. The painters and sculptors are highly regarded for their profession.

Shagzo or the traditional art of woodturning is an ancient art that has been passed down for generations. Shagzo is vibrantly practised in Bhutan and the master artisans are known as Shagzopa. Bhutan’s abundant and wide range of woods like tashing (Juglans regia), hashing (Taxus baccata), baashing (Picea spinulosa), tsenden shing (Cupressus corneyana), sermaling shing (Acer camphellii) and etometo (Rhododendron arboretum) have enabled the Bhutanese Shagzopa to create a variety of exquisite functional and decorative products like turned wooden bowls, cups, plates, and containers of various shapes, sizes and colours unique to Bhutan. Skilled wood turners also craft traditional hand drums that are beaten during religious ceremonies. Since Bhutanese tradition is deeply rooted in the teachings of the Buddha, use of drums and drum sticks are a part of the rituals performed everywhere. Used in all religious ceremonies and rituals, the Bhutanese traditional drum known as Nga, and the Nge-tog (drumstick) are indispensable articles found in every temple, monastery and home. An ancient instrument of musical offering, the beatings of the Nga symbolizes the subjugation of evil, indicates the fluctuation of tunes and wordings, and regulates the pace of other instruments during rituals and propitiation ceremonies.

Wood turned utensils and dishes were present in Bhutan since ancient times. Communities from different parts of Bhutan have a similar type of craft as cups and plates are necessary for all household meals. However, the labour-intensive wood turned lacquer wares from Yangtse earned a considerable reputation in the kingdom. About a century-old traditional woodturning art (Shag-zo) in Yangtse is still a vibrant and popular means of family business and occupation. The present young artisans in Yangtse who are in their 20s and early 30s are the fifth-generation descendants of Lobazang from Kham in Tibet. Like other crafts of Bhutan, Shagzo demands a long process. The extracted wood knots and burls have to be dried; soaked in water; roughly shaped (first turned); roughly turned bowls are boiled; dried again; final turned bowls are smoothened with sandpapers and dried leaves of Trema politoria (locally known as Sog sogpa-shing). After colouring them yellow or red, it becomes ready for the next step – lacquering. Lacquering is another time-consuming process. Traditionally, lacquerers mostly use an urushiol-based lacquer common in East Asia derived primarily from toxic wax trees known as Sey Shing in Yangtse. These wooden bowls are an integral part of both the Bhutanese and Tibetan lifestyles and this explains the high demand for these products in Tibet. In the medieval period, people from Yangtse and Bumdeling traded wooden plates (not Dhapas) and bowls (cups) to Assam (India) and Go-phors (wooden bowl with lid), Lha-phor (bowl with lid used by monks), Dra-phor (bigger than other Phobs originally used by Tibetan Drapas), and Bay-phor (used by Tibetans, and has a deeper interior than Bhutanese hobs) to people of Tibet. Other than products historically exported to Assam and Tibet, Shagzopas make varieties of wood-turned products.

Gold and silver smithy or metal carving had flourished in the country for a long time as evident from the ornaments worn by women and religious artefacts in monasteries and temples. This art is still being practiced and transmitted. It is a highly specialized art form. A special class of craftsmen called Troe-ko make jewelry of gold and silver and other items such as swords, boxes, teapots, and various ornaments of silver, often thinly plated with gold. Traditional symbols such as the dragon and other beautiful motifs are engraved on the objects. Silverwork is also found on the pillars of temples, altar tables, jewelry and other religious items. Using precious stones and metals such as coral, turquoise, silver and gold, these artisans make brooches, necklaces, bracelets, earrings, rings, amulets with religious content, traditional vessels (Chaka and Trimi) for carrying the much-chewed beetle nut, ritual objects and much more.

Gamelan is the percussion orchestra of Indonesia. Gamelan is a set of traditional music instruments mostly made of hand-forged metal (bronze, brass, and iron). Gamelan consist of slab-type (wilahan) instruments: saron/sarun/pemade, demung/sarun ganal, gender/kiliningan, slenthem/selentem/jegogan, peking/sarun paking/kantilan, kecrek/keprak, and gong-type (pencon) instruments: gong, kempul, kenong, bonang, trompong, kethuk, and kempyang. Other instruments, e.g., zither and seruling (bamboo flute). Gamelan instruments are played by beating (gong, saron, demung, slenthem, kecer); plucking and strumming (siter, kecapi, rebab); tapping (kendang); and blowing (flute). The pitch and tuning of gamelan are slendro and/or pelog (pentatonic and/or heptatonic), each has its own frequency and interval pattern. Lower and higher pitched instrument pairs, together, they produce Indonesian Gamelan melodies, which resonate the sound of ombak (beats) or pelayangan (vibrato). Gamelan music has its own techniques and forms, i.e., one melody performed simultaneously by the different instruments (heterophony), the technique of interlocking multiple instruments to structure their rhythms (interlocking part), and the rhythmic and metric patterns of beat and punctuation (colotomic punctuation). Gamelan is used for human life-cycle rituals and ceremonies, mental-health therapy and other purposes, e.g., to refine character, develop life skills, increase study concentration, self-confidence and motivation. As entertainment, Gamelan is performed at music concerts, theatres, and other artistic expressions. Archaeological evidence of gamelan was found in the bas-reliefs of the 8th-century Borobudur temple. Gamelan is widely known in Indonesia and abroad.

Indonesia 2021

Wood carving is widespread in Kazakhstan as a traditional craft. The yurt’s frame is entirely made of wood, including the shanyrakh (cylindrical top part), uykh (poles that are embedded in the shanyrakh and fixed to keregeh, or greedwall) and sykhyrlauikh (doors). The internal furniture is made of wood as well. including abdireh or sandykh (chests), tosekaghash or keruet (bed), besyk (cradle), assadal (buffet), kebezheh (kitchen cabinet) and dastarkhan (low table). Kitchenware is partly made of wood, including kubyi (butter making jar), tegeneh (cups for kumis, fermented mare’s milk), ozhau (ladle), tostaghan (bowls), saptiyayak (water dippers), astau (bastau, a large plate for boiled meat) and tabakh (plate). As well, special wooden stands (zhukh ayakh) are carved for protection against humidity. Wood carving is also used for production of musical instruments, souvenirs and horse-saddles (yer). Wood carving is widespread in Kazakhstan as a traditional craft. The yurt’s frame is entirely made of wood, including the shanyrakh (cylindrical top part), uykh (poles that are embedded in the shanyrakh and fixed to keregeh, or greedwall) and sykhyrlauikh (doors). The internal furniture is made of wood as well. including abdireh or sandykh (chests), tosekaghash or keruet (bed), besyk (cradle), assadal (buffet), kebezheh (kitchen cabinet) and dastarkhan (low table). Kitchenware is partly made of wood, including kubyi (butter making jar), tegeneh (cups for kumis, fermented mare’s milk), ozhau (ladle), tostaghan (bowls), saptiyayak (water dippers), astau (bastau, a large plate for boiled meat) and tabakh (plate). As well, special wooden stands (zhukh ayakh) are carved for protection against humidity. Wood carving is also used for production of musical instruments, souvenirs and horse-saddles (yer). In forest-rich Eastern and Northern Kazakhstan, hardwood trees are used for carving, including red birch, maple, black or red alder, ash, nut tree, and oak. In Southern Kazakhstan, trees like elm, nut tree, pear, acacia, elaeagnus (djygyda), plane tree (chinara) are used for carving. As well, tree roots and knots are used. In South-East of Kazakhstan, elm, apple, nut tree, and buckthorn are usually used by woodcarvers. Table and chair legs, and some yurt parts are usually carved from pine, aspen or poplar. Other hardwood used for carving includes mulberry tree, and in softwood, juniper. Every wood carved product is decorated with ornament. Pattern and design of wood carved objects are also based on the balance of foreground and background, vertical symmetry, importance of central piece and border pattern. Traditional woodcarving includes several techniques and cuts, such as contour, relief and three-sided hollow carving. Relief carving is used for decorating chests, cabinets, doors, beds and kitchenware. Painted relief carving is used for decorating yurt doors and buildings of worship. Three-sided hollow craving is used for making geometric patterns. Cutout is mostly used for floral ornaments. To make dishes water resistant, they are soaked with boiled animal fat. Carved objects can be combined with paintings. Usually the background is unpainted, while the foreground is painted red, blue, green and yellow. Objects can also be decorated with inlaid bones, silver and other metals. Metallic details can be decorated with precious and semi-precious stones.

The art of wood carving in Uzbekistan is part of the Central Asian artistic heritage and its origins date back to ancient times. In the traditional architecture and life of the peoples of Uzbekistan for a long time, carved wood was very popular. In architecture, it was used as important architectural details and structures such as columns, cornices, doors, ceilings, and gratings. The use of carved wood in everyday life, or as it is also called household carving, absorbed a wide range of objects from furniture to small household utensils. Local wood species were used as a material: plane tree, elm, walnut, juniper, here, apricot, poplar, tal, pear, quince, cida, which differ in a variety of texture and pattern. When decorating various household items, furniture and musical instruments, the craftsmen used ornamental carving, painting and inlay. The main centers of woodcarving art are Khiva, Urgench, Bukhara, Samarkand, Tashkent, Qoqand, Margilan, Andijan, Fergana, Shahrisyabz etc.

Parzo is the art of carving on wood, stone and slate. This art is evident throughout the country displayed magnificently on wooden structures of fortresses, palaces, stupas, temples, traditional houses and even on furniture. The following section describes some forms of carving. a. Woodcarving: Wood has been one of the most widely used resources in the country. Some of the masks worn by dancers during the festivals, the altars in the shrine room of any house, containers like bowls and cups, sheaths and handles of knives and swords, xylographic blocks are all carved out of wood. b. Choesham, Decorative Items and Furniture: Every house has a choesham (altar) entirely made of wood. Generally the altars will have carvings like choetsi and other designs such as dragons, flowers, eight lucky signs and mythological animals, on the main structure in accordance with the desires of the owner. On the upper part of the structure called gu-chag the altar will have the designs called pema, norbu, bagam, boh and ngangpa. Cabinets, chogdroms, divans, decorative floral items, religious motifs like dragons, tashi tagye and various legendary animals are carved out of wood. The three sides of chogdrom (traditional portable table) are carved with dragons, flowers or other legendary animals. Dramnyen, the traditional Bhutanese guitar is carved from wood in an intricate dragon design. The fingerboard is usually decorated with colourful traditional symbols. The hollowed sound box is covered with goatskin, and attached with either silk or nylon strings. c. Masks: The Bhutanese make various shapes and sizes of masks from semi-hardwood, usually blue pine to depict the face of gods, animals and mythological figures. These carved wooden masks are used in the sacred and religious dances. Carved wooden masks are also popular as decorations in houses, dzongs, temples and monasteries. d. Xylography: Before the invention of wood carving tradition in Bhutan, all religious texts and official documents were primarily written by hand. With the introduction of woodblock carving and printing technique by Terton Pema Lingpa (1450-1521), religious texts and images have been carved on woodblocks, thereby reproducing numerous copies, by printing on paper and textiles. Each and every temple and monastery in Bhutan hold a copy of the Buddhist cannons (the teachings) and commentaries on the teachings. Many of the texts from the cannon have been carved on wood, and reproduced by printing on paper. Woodblock carving is usually carried out on dried birch wood. To make a wooden block for carving, the woodblock is adequately oiled to make it soft and smooth for carving. The wooden block surface is then planed smooth on which the written text is glued. Once the paper has dried, it is removed from the block leaving the image of the scripts on the woodblock. The mirror image of the texts that need to be printed is left on the surface while those parts not required are removed with gouges or chisels. The texts are then carved with the help of chisels. Images and other patras (intricate designs) are carved only on to one side of the wooden block, whereas religious texts are carved on both sides of the woodblock. The carved woodblock is then coated with ink, and a sheet of paper is placed over the inked blocks. The paper is then rubbed and pressed with a roller to get the text printed. It is then left to dry either in shed or sun. Four different kinds of tools are used for xylography such as zhogthig, yatag, segchung. Round letters are carved using the tip of the mindrug with its sharp crescent shape tip. The tip of the yatag with its more relaxed crescent shape is used to carve the sub-bending yatag script. Similar to the typical Bhutanese knife; the tip of segchung is slightly slanted and carves the rest of the letters of the scripts. Zhogthig, with its wider and large tip is used to carve the lines in the space on the edge of the text that maintain the outer margin. e. Stone Carving: In Bhutan, carving on stones is not as diverse or common as wood carving but it existed in Bhutan. One comes across huge water driven grinding stone mills, hollowed-out stones used for pounding and husking grains, troughs for feeding animals, images of deities, gods and religious figures carved onto large rocks. In Bhutan, stones were also carved to make stone pots and utensils, but today these have become rare because of modern alternatives. f. Slate Carving: Slate carving is another form of art that is being practiced in Bhutan. Slate, called as do nag, is found in abundance in Bhutan, and the artisan is known as donag lopen. Portraits depicting deities and religious figures, inscriptions of mantras and religious scripts are carved onto slates, and adorned onto the exterior walls of temples, monasteries, dzongs and choetens. Apart from carving on wood, stone and slate, the Bhutanese people also carve images of gods and deities on rhino horns and ivory.