The origin of this ethnic group dance is not known but it is strongly believed to be in existence along with the Iban ethnic group since the 16th Century. The Ngajat dance is believed to been performed by warriors on their return from battles. This dance is now performed to celebrate the most significant harvest festival called ‘Gawai’, to welcome important guests to the longhouses for the celebration. The male dancers wear large feathers as part of their headgear, hold an ornate and long shield in their hand with chains, beads and a loincloth called the ‘cawat’. The female dancers have an elaborate headdress, chains, beads and a ‘dress’ that reaches to below their knees with intricate weaving. Traditionally this dance was only performed by male dancers but been innovated and perform by all. The dance is arranged in straight lines and a circle and does involve dramatic leaps and jumps performed by the male dancers. Gongs and other ethnic percussion instruments such as the ‘enkeromong’, ‘bendai’, ‘canang’ and ‘dumbak’ or ‘ketebong’ assemble the music. There are in fact several types of Ngajat dances, such as Ngajat Induk, Ngajat Bebunoh, Ngajat Lesong, Ngajat Semain, Ngajat Berayah and Ngajat Ngemai Antu Pala.\n\nThe ‘Ngajat Lesung’ for example is one of the famous Iban traditional Ngajat dance in Sarawak. The knees are bent and kept close together as they twist from side to side, ending with a simple tap of the heel on the ground. The arms move from left to right in front of the body. The dance is done gracefully. The hornbill, an iconic bird of Sarawak, symbolizing all the movements. The male dancer in this dance represents the warrior who shows off his strength by biting a wooden mortar called the ‘lesung kayu’ with his teeth while dancing. It weighs about seven kilogrammes.

The origin of this ethnic group dance is not known but it is strongly believed to be in existence along with the Iban ethnic group since the 16th Century. The Ngajat dance is believed to been performed by warriors on their return from battles. This dance is now performed to celebrate the most significant harvest festival called ‘Gawai’, to welcome important guests to the longhouses for the celebration. The male dancers wear large feathers as part of their headgear, hold an ornate and long shield in their hand with chains, beads and a loincloth called the ‘cawat’. The female dancers have an elaborate headdress, chains, beads and a ‘dress’ that reaches to below their knees with intricate weaving. Traditionally this dance was only performed by male dancers but been innovated and perform by all. The dance is arranged in straight lines and a circle and does involve dramatic leaps and jumps performed by the male dancers. Gongs and other ethnic percussion instruments such as the ‘enkeromong’, ‘bendai’, ‘canang’ and ‘dumbak’ or ‘ketebong’ assemble the music. There are in fact several types of Ngajat dances, such as Ngajat Induk, Ngajat Bebunoh, Ngajat Lesong, Ngajat Semain, Ngajat Berayah and Ngajat Ngemai Antu Pala.\n\nThe ‘Ngajat Lesung’ for example is one of the famous Iban traditional Ngajat dance in Sarawak. The knees are bent and kept close together as they twist from side to side, ending with a simple tap of the heel on the ground. The arms move from left to right in front of the body. The dance is done gracefully. The hornbill, an iconic bird of Sarawak, symbolizing all the movements. The male dancer in this dance represents the warrior who shows off his strength by biting a wooden mortar called the ‘lesung kayu’ with his teeth while dancing. It weighs about seven kilogrammes.

The origin of this ethnic group dance is not known but it is strongly believed to be in existence along with the Iban ethnic group since the 16th Century. The Ngajat dance is believed to been performed by warriors on their return from battles. This dance is now performed to celebrate the most significant harvest festival called ‘Gawai’, to welcome important guests to the longhouses for the celebration. The male dancers wear large feathers as part of their headgear, hold an ornate and long shield in their hand with chains, beads and a loincloth called the ‘cawat’. The female dancers have an elaborate headdress, chains, beads and a ‘dress’ that reaches to below their knees with intricate weaving. Traditionally this dance was only performed by male dancers but been innovated and perform by all. The dance is arranged in straight lines and a circle and does involve dramatic leaps and jumps performed by the male dancers. Gongs and other ethnic percussion instruments such as the ‘enkeromong’, ‘bendai’, ‘canang’ and ‘dumbak’ or ‘ketebong’ assemble the music. There are in fact several types of Ngajat dances, such as Ngajat Induk, Ngajat Bebunoh, Ngajat Lesong, Ngajat Semain, Ngajat Berayah and Ngajat Ngemai Antu Pala.\n\nThe ‘Ngajat Lesung’ for example is one of the famous Iban traditional Ngajat dance in Sarawak. The knees are bent and kept close together as they twist from side to side, ending with a simple tap of the heel on the ground. The arms move from left to right in front of the body. The dance is done gracefully. The hornbill, an iconic bird of Sarawak, symbolizing all the movements. The male dancer in this dance represents the warrior who shows off his strength by biting a wooden mortar called the ‘lesung kayu’ with his teeth while dancing. It weighs about seven kilogrammes.

The origin of this ethnic group dance is not known but it is strongly believed to be in existence along with the Iban ethnic group since the 16th Century. The Ngajat dance is believed to been performed by warriors on their return from battles. This dance is now performed to celebrate the most significant harvest festival called ‘Gawai’, to welcome important guests to the longhouses for the celebration. The male dancers wear large feathers as part of their headgear, hold an ornate and long shield in their hand with chains, beads and a loincloth called the ‘cawat’. The female dancers have an elaborate headdress, chains, beads and a ‘dress’ that reaches to below their knees with intricate weaving. Traditionally this dance was only performed by male dancers but been innovated and perform by all. The dance is arranged in straight lines and a circle and does involve dramatic leaps and jumps performed by the male dancers. Gongs and other ethnic percussion instruments such as the ‘enkeromong’, ‘bendai’, ‘canang’ and ‘dumbak’ or ‘ketebong’ assemble the music. There are in fact several types of Ngajat dances, such as Ngajat Induk, Ngajat Bebunoh, Ngajat Lesong, Ngajat Semain, Ngajat Berayah and Ngajat Ngemai Antu Pala.\n\nThe ‘Ngajat Lesung’ for example is one of the famous Iban traditional Ngajat dance in Sarawak. The knees are bent and kept close together as they twist from side to side, ending with a simple tap of the heel on the ground. The arms move from left to right in front of the body. The dance is done gracefully. The hornbill, an iconic bird of Sarawak, symbolizing all the movements. The male dancer in this dance represents the warrior who shows off his strength by biting a wooden mortar called the ‘lesung kayu’ with his teeth while dancing. It weighs about seven kilogrammes.

The origin of this ethnic group dance is not known but it is strongly believed to be in existence along with the Iban ethnic group since the 16th Century. The Ngajat dance is believed to been performed by warriors on their return from battles. This dance is now performed to celebrate the most significant harvest festival called ‘Gawai’, to welcome important guests to the longhouses for the celebration. The male dancers wear large feathers as part of their headgear, hold an ornate and long shield in their hand with chains, beads and a loincloth called the ‘cawat’. The female dancers have an elaborate headdress, chains, beads and a ‘dress’ that reaches to below their knees with intricate weaving. Traditionally this dance was only performed by male dancers but been innovated and perform by all. The dance is arranged in straight lines and a circle and does involve dramatic leaps and jumps performed by the male dancers. Gongs and other ethnic percussion instruments such as the ‘enkeromong’, ‘bendai’, ‘canang’ and ‘dumbak’ or ‘ketebong’ assemble the music. There are in fact several types of Ngajat dances, such as Ngajat Induk, Ngajat Bebunoh, Ngajat Lesong, Ngajat Semain, Ngajat Berayah and Ngajat Ngemai Antu Pala.\n\nThe ‘Ngajat Lesung’ for example is one of the famous Iban traditional Ngajat dance in Sarawak. The knees are bent and kept close together as they twist from side to side, ending with a simple tap of the heel on the ground. The arms move from left to right in front of the body. The dance is done gracefully. The hornbill, an iconic bird of Sarawak, symbolizing all the movements. The male dancer in this dance represents the warrior who shows off his strength by biting a wooden mortar called the ‘lesung kayu’ with his teeth while dancing. It weighs about seven kilogrammes.

The origin of this ethnic group dance is not known but it is strongly believed to be in existence along with the Iban ethnic group since the 16th Century. The Ngajat dance is believed to been performed by warriors on their return from battles. This dance is now performed to celebrate the most significant harvest festival called ‘Gawai’, to welcome important guests to the longhouses for the celebration. The male dancers wear large feathers as part of their headgear, hold an ornate and long shield in their hand with chains, beads and a loincloth called the ‘cawat’. The female dancers have an elaborate headdress, chains, beads and a ‘dress’ that reaches to below their knees with intricate weaving. Traditionally this dance was only performed by male dancers but been innovated and perform by all. The dance is arranged in straight lines and a circle and does involve dramatic leaps and jumps performed by the male dancers. Gongs and other ethnic percussion instruments such as the ‘enkeromong’, ‘bendai’, ‘canang’ and ‘dumbak’ or ‘ketebong’ assemble the music. There are in fact several types of Ngajat dances, such as Ngajat Induk, Ngajat Bebunoh, Ngajat Lesong, Ngajat Semain, Ngajat Berayah and Ngajat Ngemai Antu Pala.\n\nThe ‘Ngajat Lesung’ for example is one of the famous Iban traditional Ngajat dance in Sarawak. The knees are bent and kept close together as they twist from side to side, ending with a simple tap of the heel on the ground. The arms move from left to right in front of the body. The dance is done gracefully. The hornbill, an iconic bird of Sarawak, symbolizing all the movements. The male dancer in this dance represents the warrior who shows off his strength by biting a wooden mortar called the ‘lesung kayu’ with his teeth while dancing. It weighs about seven kilogrammes.

Mr. Kudaibergen Kulmambetov in his Jewellery Workshop Arlask, 2011

Mr. Kulmagambet, Famous Kazakh Jeweller Bayan Aul, 1868

Dey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combines, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne. \n\nThe white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose. \n\nGenerally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing. \n\nPerhaps, the paper making art must have been existed in the early centuries, even before the use of words and sentences, when pictures and symbols were used as a means of communication in Bhutan as the Padma chronicles mention that "the king ordered paper to be collected in the land of the Mon." This was when the Dharma King Trisong Detsen (755-804) of invited Guru Padmasambava to Tibet in the 8th century and introduced the Tantric teachings to that land. Having completed the construction of Samye Monastery, translation of Buddha's precepts and commentary texts that are written in Sanskrit were initiated into Tibetan language through Indian pandits and incarnate translators from Tibet, but there was not enough paper in Tibet. So the king imported huge amounts of paper from the southern country (Bhutan), which enabled Tibet to produce many volumes of the scriptures. This means that trade between Tibet and Bhutan was already active at that time. The so-called shog-tang (shog-ltang), a cargo size of 1000 sheets of Daphne paper, were transported to Tibet in large quantities for trade purposes. This means that very early in history, papermaking was passed down from generation to generation, from father to son, from son to son, and so on. \n\nGradually, as the demand for paper increased, the paper industry in the country expanded, especially in the 17th century when great changes took place in the country after the arrival of Zhabdrung Ngawang Namgyal (1594-1651). At that time, the demand for paper increased greatly at the central government, monastic community and monastery levels, leading to a nationwide expansion in the production and use of paper especially for printing purpose. \n\nPaper manufacturing units were instituted in Dzongs and employed five people either form the monastic body or from the lay citizens for papermaking. The raw materials such as daphne bark, ash, etc. were supplied by the residents of the respective dzongkhag as tax. The dzongkhag administrations then transported the paper cargoes to the central government and ensured proper remuneration. The skilled workers at the papermaking centers were also appointed from the villages and households in the district, who were exempt from other charges such as labor, fodder, firewood, and pounded rice. A load Shog-tang as mentioned above, was a bundle of 1000 sheets of paper. (Lam Kezang Chophel, 2021). Normally a single sheet of paper measures approximately 75x110 cm and colloquially it is called pheg-pang.\n\nAlthough, papermaking was once a thriving art until 1970 yet, due to the development progress in the country and introduction of imported papers such as books and note books has gradually affected in declining number of paper production centres in the country.

#bhutan #bhutaneseculture #bhutantravel #유네스코아태무형유산센터 #unesco\n\nDey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combine, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne.\n\nThe white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose.\n\nGenerally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing.\n\nPerhaps, the paper making art must have been existed in the early centuries, even before the use of words and sentences, when pictures and symbols were used as a means of communication in Bhutan as the Padma chronicles mention that "the king ordered paper to be collected in the land of the Mon." This was when the Dharma King Trisong Detsen (755-804) of invited Guru Padmasambava to Tibet in the 8th century and introduced the Tantric teachings to that land. Having completed the construction of Samye Monastery, translation of Buddha's precepts and commentary texts that are written in Sanskrit were initiated into Tibetan language through Indian pandits and incarnate translators from Tibet, but there was not enough paper in Tibet. So the king imported huge amounts of paper from the southern country (Bhutan), which enabled Tibet to produce many volumes of the scriptures. This means that trade between Tibet and Bhutan was already active at that time. The so-called shog-tang (shog-ltang), a cargo size of 1000 sheets of Daphne paper, were transported to Tibet in large quantities for trade purposes. This means that very early in history, papermaking was passed down from generation to generation, from father to son, from son to son, and so on.\n\nGradually, as the demand for paper increased, the paper industry in the country expanded, especially in the 17th century when great changes took place in the country after the arrival of Zhabdrung Ngawang Namgyal (1594-1651). At that time, the demand for paper increased greatly at the central government, monastic community and monastery levels, leading to a nationwide expansion in the production and use of paper especially for printing purpose.\n\nPaper manufacturing units were instituted in Dzongs and employed five people either form the monastic body or from the lay citizens for papermaking. The raw materials such as daphne bark, ash, etc. were supplied by the residents of the respective dzongkhag as tax. The dzongkhag administrations then transported the paper cargoes to the central government and ensured proper remuneration. The skilled workers at the papermaking centers were also appointed from the villages and households in the district, who were exempt from other charges such as labor, fodder, firewood, and pounded rice. A load Shog-tang as mentioned above, was a bundle of 1000 sheets of paper. (Lam Kezang Chophel, 2021). Normally a single sheet of paper measures approximately 75x110 cm and colloquially it is called pheg-pang.\n\nAlthough, papermaking was once a thriving art until 1970 yet, due to the development progress in the country and introduction of imported papers such as books and note books has gradually affected in declining number of paper production centres in the country.\n\nFor more information\nhttps://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874507459569673284

#bhutan #bhutaneseculture #bhutantravel #유네스코아태무형유산센터 #unesco\n\nDey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combine, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne.\n\nThe white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose.\n\nGenerally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing.\n\nPerhaps, the paper making art must have been existed in the early centuries, even before the use of words and sentences, when pictures and symbols were used as a means of communication in Bhutan as the Padma chronicles mention that "the king ordered paper to be collected in the land of the Mon." This was when the Dharma King Trisong Detsen (755-804) of invited Guru Padmasambava to Tibet in the 8th century and introduced the Tantric teachings to that land. Having completed the construction of Samye Monastery, translation of Buddha's precepts and commentary texts that are written in Sanskrit were initiated into Tibetan language through Indian pandits and incarnate translators from Tibet, but there was not enough paper in Tibet. So the king imported huge amounts of paper from the southern country (Bhutan), which enabled Tibet to produce many volumes of the scriptures. This means that trade between Tibet and Bhutan was already active at that time. The so-called shog-tang (shog-ltang), a cargo size of 1000 sheets of Daphne paper, were transported to Tibet in large quantities for trade purposes. This means that very early in history, papermaking was passed down from generation to generation, from father to son, from son to son, and so on.\n\nGradually, as the demand for paper increased, the paper industry in the country expanded, especially in the 17th century when great changes took place in the country after the arrival of Zhabdrung Ngawang Namgyal (1594-1651). At that time, the demand for paper increased greatly at the central government, monastic community and monastery levels, leading to a nationwide expansion in the production and use of paper especially for printing purpose.\n\nPaper manufacturing units were instituted in Dzongs and employed five people either form the monastic body or from the lay citizens for papermaking. The raw materials such as daphne bark, ash, etc. were supplied by the residents of the respective dzongkhag as tax. The dzongkhag administrations then transported the paper cargoes to the central government and ensured proper remuneration. The skilled workers at the papermaking centers were also appointed from the villages and households in the district, who were exempt from other charges such as labor, fodder, firewood, and pounded rice. A load Shog-tang as mentioned above, was a bundle of 1000 sheets of paper. (Lam Kezang Chophel, 2021). Normally a single sheet of paper measures approximately 75x110 cm and colloquially it is called pheg-pang.\n\nAlthough, papermaking was once a thriving art until 1970 yet, due to the development progress in the country and introduction of imported papers such as books and note books has gradually affected in declining number of paper production centres in the country.\n\nFor more information\nhttps://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874507459569673284

#bhutan #bhutaneseculture #bhutantravel #유네스코아태무형유산센터 #unesco\n\nDey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combine, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne.\n\nThe white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose.\n\nGenerally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing.\n\nPerhaps, the paper making art must have been existed in the early centuries, even before the use of words and sentences, when pictures and symbols were used as a means of communication in Bhutan as the Padma chronicles mention that "the king ordered paper to be collected in the land of the Mon." This was when the Dharma King Trisong Detsen (755-804) of invited Guru Padmasambava to Tibet in the 8th century and introduced the Tantric teachings to that land. Having completed the construction of Samye Monastery, translation of Buddha's precepts and commentary texts that are written in Sanskrit were initiated into Tibetan language through Indian pandits and incarnate translators from Tibet, but there was not enough paper in Tibet. So the king imported huge amounts of paper from the southern country (Bhutan), which enabled Tibet to produce many volumes of the scriptures. This means that trade between Tibet and Bhutan was already active at that time. The so-called shog-tang (shog-ltang), a cargo size of 1000 sheets of Daphne paper, were transported to Tibet in large quantities for trade purposes. This means that very early in history, papermaking was passed down from generation to generation, from father to son, from son to son, and so on.\n\nGradually, as the demand for paper increased, the paper industry in the country expanded, especially in the 17th century when great changes took place in the country after the arrival of Zhabdrung Ngawang Namgyal (1594-1651). At that time, the demand for paper increased greatly at the central government, monastic community and monastery levels, leading to a nationwide expansion in the production and use of paper especially for printing purpose.\n\nPaper manufacturing units were instituted in Dzongs and employed five people either form the monastic body or from the lay citizens for papermaking. The raw materials such as daphne bark, ash, etc. were supplied by the residents of the respective dzongkhag as tax. The dzongkhag administrations then transported the paper cargoes to the central government and ensured proper remuneration. The skilled workers at the papermaking centers were also appointed from the villages and households in the district, who were exempt from other charges such as labor, fodder, firewood, and pounded rice. A load Shog-tang as mentioned above, was a bundle of 1000 sheets of paper. (Lam Kezang Chophel, 2021). Normally a single sheet of paper measures approximately 75x110 cm and colloquially it is called pheg-pang.\n\nAlthough, papermaking was once a thriving art until 1970 yet, due to the development progress in the country and introduction of imported papers such as books and note books has gradually affected in declining number of paper production centres in the country.\n\nFor more information\nhttps://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874507459569673284