The epic, folk and musical heritage of Dede Qorqud/ Korkyt Ata/ Dede Korkut is based on twelve heroic legends, stories and tales and 13 traditional musical compositions (in Kazakhstan, Kuys of Korkyt Ata) that have been shared and transmitted from generations to generations, through oral expressions, performing arts, cultural codes and musical compositions. The element contains social, cultural, moral values such as heroism, dialogue, physical and spiritual wellness and unity as well as respect to nature that are still maintained by all parts of society Dede Qorqud /Korkyt Ata/ Dede Korkut appears in each story as a legendary character and is a wise person, a sage of minstrels whose words, music and expressions of wisdom are related to traditions of birth, marriage and death. In Korkyt's musical compositions, the main intonations are reproduced on Kobyz (musical instrument), through the sounds of nature, and imitations of soundscapes are characteristic for this medium, e.g. imitation of the howl of a wolf, a swan's note, a horse's run, the whoosh of an arrow, a dog's yawl, a baby's cry, a lullaby, etc. The feature of Korkyt's musical compositions is their interconnection with each other through the epic stories which accompany each musical composition. The element was safeguarded due to its bearers – community of epic and tale narrators and music performers. Today, the element is transmitted in two ways: informal – within the family or community, and formal - in various educational institutions. From family events to national and international festivities the element is sustained and practiced during a wide variety of occasions in various cultural spaces and therefore it is well rooted in society. For the Turkic speaking communities, the element is the connecting thread of generations and unites them today.

Azerbaijan,Kazakhstan,Turkey 2018

Tamzhing Phag-chham is a solo mask dance with a mask made of a wild boar (Sus scrofa), which is very common on the Asian continent. The term "Phag-chham" sometimes has two different meanings; Phag-chham (tamzhing Phag-chham) and the other, the Phag-chham performed during the Raksha Mangchham (a theatrical mask dance of the Intermediate state). Tamzhing Phag-chham was originally composed by the Great Treasurer Terton Pama Lingpa (1450-1521) on the consecration of the temple Tamzhing Lhundrub Choeling on the 15th day of the Tiger Month (11th month) of the Wood Ox Year, which corresponds to the Gregorian year 1505, in Bumthang, one of the central districts of Bhutan. Later it was performed in other monasteries founded either by Terton himself or by his successors in most of the eastern and central parts of Bhutan. Phag-chham is among the most important and sacred mask dances in Tamzhing, and the festival "Tamzhing Phag-la Chod-pa" is also named after this dance, which is held every year from the 10th to the 12th of the eighth lunar month. It is performed by an amateur and can only be danced by the Chhamjug (the second leader of the mask dancers), who wears a wooden boar mask, exquisite brocade costumes with dangling skirts made of five eye-catching colored cloths, and holds two bundles of willow branches in both hands. The boar mask is considered one of the masterpieces of the founder himself, as are the dance steps themselves. Since the mask is considered sacred, it is received in a Chibdrel (traditional procession) when the dancer comes out of the Chhamkhang (preparation room). The origin of the mask dance lies in local tradition: Pema Lingpa was looking for a suitable place for his temple in the Choekhor valley when he saw a wild boar digging in the ground. He realized that this was a sign from the enlightened being Dorje Phagmo (deity Skt. Vajravarahi) to show him the suitable place. After the temple was built, he held a festival in honor of the patron deities during the inauguration as a symbol of gratitude. Since it is believed that the prophecy and the groundbreaking ceremony for the Tamzhing Temple was led by Dorje Phagmo, the festival is dedicated to her and is called Phagla-Chodpa. On the second day of the festival, Phag-chham leads the ground-breaking ceremony to sanctify the site before more mask dances are performed for the audience. Due to the unexpected loss of the Chham-yig (choreography manuscript) from the monastery many years ago, elders have regretfully found that the Phag-chham performed today no longer contains the complete steps and choreography. Elderly locals says that, at that time, there were more than 14 different types of steps, and due to faulty oral tradition, nearly 50% of the choreographies have been lost. The communities are concerned that without documentation, there is a risk of even more steps being lost and even new ones being added, as many of the artisans are either lay monks or farmers from the affiliated communities.

Regong Arts mainly refer to Buddhism formative arts such as Thangka, mural, barbola, sculpture on which Tibetan and Tu folk handicraftsmen depend to pass on their making knowledge and manual technical skills. The content of Regong Arts consists of Tibetan Buddhism, mythical stories, epics and traditional knowledge. And the main painting materials include painting cloth, painting brush, dyestuff, prepared Chinese ink, red soil, silk and glue. Thangka, mural, barbola, and sculpture are widely used in Tibetan Buddhism temples and farmers’ or herdsmen’s houses. Every handicraftsman has his own fixed place to make material objects. Regong Arts have originated in 13th century and stemmed mainly from Tibetan Mantang school. After they were introduced into Regong area, Regong Arts have formed an important distinctive school of Tibetan Buddhism arts. Regong Arts have various forms with unique features. 1. Thangka, the pronunciation of its Tibetan counterpart, refers to religious scroll paintings which are used to worship Buddha, myths and figures who invented some useful technology after being mounted with colourful satin. The main technological process of making Thangka is as follows: first, the fine white cloth or coarse linen should be stretched on a wooden embroidery frame; secondly, base powder and thin glue sheet are used at the bottom and polished; thirdly, according to the content, the painter draws an outline with charcoal pencils made by himself about religious figures, birds and beasts and flowers and trees, etc.; fourthly, the painter puts the glue into various natural minerals and animals or plants dyes, and then he uses these painting materials to draw the picture with the special painting brush; finally, the finished picture is mounted carefully. Thangka is famous for its sophisticated workmanship, contents and bright colors in the world. 2. Barbola is a kind of Thangka made from silk fabric. Its main forms are Barbola Thangka, Barbola veiling, Barbola column ornaments etc. It is made from silk and brocade where pictures, figures, animals and plants are accurately cutting and sewn. Its techniques and effects take place in two forms: soft relief which combines folk embroidery and filled relief; and pasted and patched soft fabric which are cut to make different forms. Barbola has the strong stereoscopic image. 3. Regong sculpture comprises clay sculpture in addition to wooden sculpture, stone inscription, brick sculpture etc. Clay sculpture takes place in two forms: multi-colour and single-colour. Its process includes selection and finalization, clay processing, keel structuring, filling in, outline shaping, partial adjustment and inlaying gold lines or colour painting etc. Rafters, vaults, sunk panels, column ornaments, and tubular lections in temples and door curtains, credences, tea tables and lection cabinets in farmers’ or herdsmen’s houses are all sophisticated wooden sculptures. Stone inscription is that lections are imprinted on the slates or figures of Buddha are made in an intaglio plate. In addition, there is relief used in the stack of lection stones. After being created, Regong Arts are passed on generations by generations. Regong Arts are manual skills grasped by some villagers. Based on the special art forms, they combine traditional knowledge with history memory and come the Arts down. The art forms are widely recognized by dwellers in Tibetan communities and traditional craftsmen in China. At present, 520 folk artists engage in the artistic creation of Regong Arts. Passing on the Arts mainly takes place between fathers and children, or between masters and apprentices. Inheritors can be monks or folk artists. When learning Thangka, Barbola or sculpture, the painters must strictly follow the Buddhism painting book Lection of Measurement, starting from line-drawing, figure shaping, colour matching, pattern design and sizing. Regong Arts are featured with the unification of Tibetan Buddhism and traditional culture. Its influence can be found in surrounding provinces such as Tibet, Gansu, Inner Mongolia, Yunnan, Sichuan, and even South-eastern Asian countries.

China 2009

"Trud" Dance is originated in rural communities and is now only found in Siem Reap and some villages of Battambang adjacent to Siem Reap. "Trud" in Sanskrit means “The act of cutting, detachment) The locals play this dance only during the Khmer New Year, in the sense of cutting off the old year to move on to the new year, as well as expelling evil spirits in order to get good fortune. However, during the dry season, this dance is also performed to pray for rainfall. In addition, the importance of playing this dance is to raise funds to build and repair communal infrastructures in the community, especially in the pagoda, which is not for personal gain. This dance can be joined by more or fewer dancers according to the preferences of the village or the number of volunteers. The equipment also depends on the number of dancers. The equipment is also doubled as the props and accompaniment to the dance. The complete Trud Dance can consist of instruments such as: Kanh Chhe (bamboo mast with bells on top), Changkrang Dombe, ChangKrang Rong, Sko Arak (hand drum), Bei Pok (flute), Tro Ou, Tro Sor (bowed strings) and Dang Santuch or Dang Doy (pulling bar of an ox cart) attached with an open bag for retrieving the donations. The main accessories for the Trud Dance are clown masks and crowns made of paper mache and lacquer, real deer and banteng antlers or artificial antlers made of paper mache, peacock feathers,s and fake long nails made of rattan. When performing, there are two or three priests leading the group and holding a fundraising bowl, and giving blessings to those who Donate. If it is played in rain asking ritual, the priest who leads the ceremony is called “Dangkhao”. The lyrics are not the same, it depends on the preference of the group or the village because some lyrics can be created immediately according to the actual situation in order to convince the donor to give more donations. But the interesting thing is that most of the "songs" contain 4 syllables in each line. 6 The following are some excerpts from the lyrics in the document of Samdech Preah Vanroth Iv Tuot, Chief of Monk from Battambang Province: Lyrics on arrival at the ceremonial ground I arrive outside your gate, calling out to you. My respected master Can I come inside? (Vocalizing) oh na neang na Can I come inside? Permit or not, Please let us know. We can come in or not, Please quickly tell us. (Vocalizing) oh na neang na Please quickly tell us. Fellow team! Fellow team! That the fire is lit Means that we are welcomed. (Vocalizing) oh na neang na Means that we are welcomed. Lyrics when asking for alms This Trud is not from here. This Trud is not from here. The master ordered us That we came here to play. (Vocalizing) oh na neang na That we came here to play. Big house with sculptures Stair steps made of silver Suiting his wealth (Vocalizing) oh na neang na sa ra mom bong. Lyrics when collecting the scattered alms Some hide, some throw, Some scoop up, Don’t talk, lads! Catch the money quietly (Vocalizing) Yeur chhai nao nao neang nan a na oun euy. Lyrics to bless the givers Fellow team! His silk and thread He gave us all We shall bless him. To have a son She weaves silk to bless regularly Officials He gave us all To get a mouthful for a daughter Soup for money. We bless him. Children as well. Sculpture land. Before performing, people prepare an offering for Lord Vishvakarman and the spirits of the land and nature. Then the priest ties holy thread to the wrists of the dancers and puts on the masks and horns for the performers. Mr. Pol Sam Oeun researched this dance in Battambang province and choreographed it as a performance on stage and performed for the first time by Mr. Meas Kok, who was the first singer to hold the Dang Santuch, and the following performers: Mr. Ros Lon, Mr. Meas Sam El, Ms. Mom Hoy, Mrs. Sieng Sivhun, Mrs. Kaing Steng, Mrs. Ok Leung, Mr. Hing Tim, Mr. Moeung Chandara, Mr. Kong Samith, Mr. Pen Lon, Mr. Put Lon, Mr. Suon Sareth, Mr. Eam Sean, Mr. Pen Yet. The dance ceased to be performed in 1975 and resumed in December 1979. Today, Trud Dance is very popular because during the period before the New Year. It is performed in government institutions, companies, or private houses to ward off evil spirits and bring prosperity.

"Plowing” has been a traditional royal ceremony of the Khmer kings since ancient times. That is why to this day, the Royal Palace still plays an important role in organizing this ceremony. The rainy season, a king or a representative plow the fields to be the first to follow the path, because in the belief, the king is considered a deity who is in human appearance to rule over the kingdom. Therefore, the king is the king of the earth or the lord of the earth, that is, the "master of the field." On the other hand, even though the king does not farm directly, this ceremony shows the king's concern for the livelihood of the people. The plowing ceremony is also to pray for good rain according to the season, abundant harvest, prosperous district and free from all diseases. The history of the Khmer plowing ceremony probably dates back to the time when the Khmer came to know Indian civilization, as there are statues of Preah Pol Ream or Preah Tep (the avatar of Preah Nareay), the main deity of agriculture, holding a plow in Phnom Da (Takeo province) since pre-Angkorian times. Preah Pol Ream is probably quite popular, as there are sculptures in Banteay Srei, Angkor Wat, Baphuon, Banteay Sarae .... In the inscriptions, there are names of Preah Pol Ream who have different functions in the temple and are known as the name of Preah Pol Ream, for example, "សង្កស៌ណ" which means "plowed" or "pulled out". The evidence that Preah Pol Ream was the god of agriculture became clearer in the Middle Ages: the role of an official in charge of agriculture in the whole country is called "Oknha Pol Tep" and until the law governing this field, the Khmer people called it "Krom Pol Tep" (or called "Krom Peak Huk Pol Tep"). Therefore, it is not a coincidence that Preah Pol Tep, a deity, has a duty in the Royal Plowing Ceremony. His image was on a flag that was solemnly flown at the ceremony. Not only that, they built a statue of Preah Pol Ream (modeled after the statue of him at Phnom Da temple) in a stall for the ceremony and offerings that emphasize the importance of Preah Pol Ream in the plowing ceremony. Every year, the Royal Plowing Ceremony is held on the 4th of Roch Pisak (May-June), the beginning of the rainy season, and is celebrated in a designated field, sometimes in the capital and sometimes in the provinces. If it is done in Phnom Penh, the field of Preah Meru is used, and if it is done in Siem Reap, the field in front of the terrace of the elephants is used as the field. Before the day of the ceremony, they usually build a pavilion at Veal Preah Srae and other five pavilions as a place where the deities can watch the plowing from all five directions. According to tradition, before the 4th day of Roch, Visakh, from the 1st day of Roach, 2nd Roach and 3rd Roach, 5 Brahmins perform the Pali ceremony in the middle of Preah Srae to ask permission from Krong Pali, Preah Phum and Neang Kong Hing Preah Thorani Ceremony. After offering to Krong Pali, it is time to offer to Deva Rub in the ceremony hall by inviting Preah Panchakset (other Devarub) to be displayed in the ceremony hall and to hold ceremonies in the five directions. In the east, the Brahmins Preah Reach Kru invited the Preah Komjay to set up and perform Horm ceremonies. In the southeast, the Brahmins Thireach invited Preah Narayan to set up and perform Horm ceremonies. In the southwest, the Brahmins Preah Jeak Yea Thib Dei invited the Preah Chanti to set up and perform Horm ceremonies. In the Northwest, the Brahmin Preah Minthor (Mahenthor) invites Preah Ey So to set up and perform Horm ceremony. The northeast, the Brahmin invited Preah Kanes, to set up and perform Horm ceremonies. When the Brahmins perform the ritual for three days, the fourth day is the day of plowing. Previously, the king was the direct plowman. But if he does not perform this, a representative of Oknha Pol Tep must be appointed. If Oknha Pol Tep had other business, Oknha Pochnea was assigned to replace from time to time. Nowadays, it is rare to see a king plowing, often his representative, sometimes as a royal family and sometimes as a high-ranking official in the government. Representing the King is called "Sdach Meak”, wearing a robe like the King is a plowman." As for the wife of King Meak, called "Chumteav or Preah Mehua", she wears a robe in the manner of the king's wife, who sows rice crops. Early in the morning ... King Meak and Neang Mehua went to worship His Majesty to be appointed. The king put incense on the foreheads of the king Meak and his wife as a symbol of appointment, and the King gave Sdach Meak a sword. Meak. The King Meak holds his sword and travels to the procession which is waiting. The King Meak sits on Preah Sor Leang, and Preah Mehua sits on a hammock accompanied by a procession led by the music of Pin Peat (play the song called Klom). Upon entering the Royal rice fields, King Meak and Preah Mehua must worship at the southwestern center before starting the plowing ceremony. This plow has three plows: the front plow is called "Lead plow", the middle plow is held by the king Meak and there is another plow in the back. Preah Mehua must follow the third plow and sow the seeds such as the sesame, bean, corn, and the rice crops following the path. After plowing three rounds of the royal rice fields, the plowing procession stopped at the eastern Mondob so that the king Meak could enter to worship the deity of the Mondob. The last task is for the Brahmin to perform a prayer ceremony, the cows are removed from the yoke of the plow to eat the seven kinds of food prepared on a table with pedestal dishes, including water, rice, grass, corn kernels, sesame seeds, beans and wine. The cow’s prediction is predicting the well-being and productivity of the people this year. If the cows drink a lot of water, the prophecy predicts that this year there will be enough water and enough rain. If the cows eat a lot of grass, the animals will get sick. If the cows eat a lot of rice, beans and sesame, these crops will bear a lot of fruit. But if the cows do not eat, the prophecy is that this year there will be wicked people, many drunkards, and the nation will suffer and war. At the end of the ceremony, people, young and old, compete to pick rice, corn, and soybeans to be used for seed, because it is believed that when all these seeds are mixed with their own seeds, the yield will be good. What is special is that Cambodians believe that when everything goes through the ceremony, "Mongkol, Serey Soursdey, the yield will come.

"Lacquer" is a material composed of resin from (Kreol Tree), the last resin, water resin, and ash palm leave. That is why we sometimes hear the composition called "Mareak lacquer". Lacquer has been used since ancient times, as there are sculptures and inscriptions describing the use of this lacquer. For example, temple inscriptions. Kork Poti (K, 814), the inscription in Kampong Thom (K. 444), and the inscription of Prasat Chi Kreng (K. 168). Apart from being used for painting luxury and auspicious objects such as “Tork” wooden or golden plate used for holding valuable objects, “Tang Rong” wedding boxes, betel nut and leave boxes, and other everyday items, lacquers are also used to decorate crowns and masks for royal ballet and Lakhon Khol. That is why to this day, although the decoration on the mask of the dance is not made of lacquer, it is still called "mask lacquer". In general, the lacquer masks that are produced often have a giant mask, monkey masks, Ey sei masks, Ream masks, Preah Leak masks, or other animal masks, all of which are used in classical and Khol dance. According to the traditional method, in order to get the mask for the dancer, the clay is first kneaded into the desired shape, then applied glue on paper one layer at a time until another layer is thick enough. Next, left it to dry before removing the sample. However, this type of lacquer can only be used once or twice because the clay mold is easily damaged. After 1960, Mr. On Sok, a professor of "Khmok-Smach" at the School of Fine Arts, came up with the idea of making a mold from cement that can be used for a longer period than the one made of clay. When the mask sample is dried, you need to start gluing paper on it, but before gluing you need to soak the mask with water first to make it easier to peel off. Then use a piece of parchment paper to cover the mask and crumble another paper to glue on it with 10 layers but if the mask is small, it will be glued only 6 layers. The glue known as (Bay Marn is made by cooking rice flour with water). Let the mask dry before peeling, gluing, and sewing. When the mask is completely dried, start drawing ornament details of the mask such as Kbang, crown, ears or called (Jhon Trojeak) all of which are made by the lacquer. To make it you will need to boil Mareak resin, last resin, water resin and ash palm leave together then pour it into Kbach mold and let it cool before using it to glue on the mask. Then apply a layer of tan paint before applying gold foil on the lacquer. In the past, the molds were carved on marble, but later wax was added and cemented instead. The next step is to paint the mask according to the characters and then use a small brush to cut the strands into eyebrows, mustache, ears, and neck. Lastly, holes are pierced in the eyes and nostrils for the performer to see and breathe. Nowadays, traditional mask lacquer making is very rare as raw materials are becoming more and more difficult to find, and lacquer masks are sold at high prices, making it difficult for artists to buy and use them. Therefore, most of the dances that artists wear today are paper ornaments instead of lacquer.

Miniature is used in fine art paintings, sculptures and graphic works of small forms, as well as the art of creating them. Miniature is a part of manuscripts.

Stone carving (stone cutting) is an ancient art of Uzbeks as well. Artefacts found during archaeological excavations say, that the very first treated stones in Uzbekistan belong to the Paleolithic, Neolithic and Bronze Age. The masters of those times knew how to process the stone, knew the techniques for transporting heavy solid stones, used lever devices to lift them, knew which stones were lighter and which were more difficult to process, already had tools to give pattern and relief to the stone. Their wide use of granite, marble, limestone and gypsum is indicated by excavations of ancient monuments in southern Uzbekistan - in the towns of Koratepe, Fayaztepe, Ayritash. Here Buddhist temples were decorated with carved stone, sculptures were created from stone. Later, stone cutting became a craft, and the art of stone carving reached its height in Maverannahr, Khorasan, Khorezm and other territories. For example, during the reign of Amir Temur, architectural masterpieces such as Gor-Emir, Shahi-Zinda, the Bibihanum mosque, the Ahmad Yassawi mausoleum and much more were created, where magnificent sculptures and carved stone with letters are presented. The displaced stone is magnificent - the tombstone of the great Temur and the grates carved from marble in Gori Emir. A lot of stone and marble was used in the architecture of ancient Khiva. The entire foundation of the palaces is laid out there by them, and they are all carved from geometric and floral figures. The stone-cutting walls of the Khiva Palace of Tashavli can be considered a magnificent example of beautiful stone carving, it is therefore called the Stone Courtyard. There are several types of stone carving: line threads, chain, lattice, deep, multi-layer, flat threads, etc. It also matters which stone works with - soft, pliable, medium hardness or hard.

Jimzo is a traditional art of forming religious images. Jim means "clay" and Zo means "art", literally "clay art". In Bhutan, it can be traced back to the 7th century, to the time of Tibetan King Songtsen Gampo (569–649?), who is believed to have built 108 Lhakhangs (temples), under which the pioneering Buddhist temples such as Kichu and Jampa Lhakhangs were built. Various clay paintings from different centuries, beginning with the time of Guru Rinpoche, attest to the existence of clay art in Bhutan much earlier. In the time of Terton Pema Lingpa (1450-1521), this art became popular. Towards the end of the 17th century, the art was codified and included by the fourth Desi (temporary ruler) Gyalse Tenzin Rabgye (1638–1696), as one of the thirteen arts and crafts of Bhutan. Later, at the time of Zhabdrung Ngawang Namgyal (1594-1651) in the 17th century, a very skilled sculptor named Trulku Dzing was invited to Bhutan. Trulku Dzing erected numerous clay figures in Punakha and Wangduephodrang Dzong. The art was later codified and included as one of the thirteen traditional arts and crafts of Bhutan by the 4th Druk Desi (temporary ruler) Gyalse Tenzin Rabgye in the late 17th century. Since then the art of sculpting has been maintained and passed from teacher to students over many generations until today. Bhutanese jim zop (sculptors) are known for the quality and intricacy of creating delicate clay sculptures. They practice sculpting as a pious act since it is based on the iconographic principles of Buddhist art. It is very important to adhere to the rules that prescribe the precise measurement of the body structure in relation to the limbs, postures, eyes, ears, fingers and nose and the body tints, garments and ornaments. a. Religious Statues and Ritual Objects: Sculptors make clay statues, ritual objects and tsha tsha (miniature clay stupa) and clay masks worn during festivals. Numbers of exceedingly fine and intricate religious sculptures and ritual objects made of clay can be seen in every temple, monastery, and the dzongs of Bhutan. These clay sculptures vary in sizes, varying from tiny statues to over twenty feet. There are clay sculptures of the Buddhas and Bodhisattvas, various deities, gods, goddesses and prominent religious figures which depict the foundation of faith, worship and reverence for the Buddhists. b. Types of Clay used in Sculpting: Clay is the basic material for making sculptures. A special kind of clay can be found deposited in small quantities between mud and gravels usually in marshy areas. Sculptors use the best quality clay as the images and objects they make must stand against the change of weather for generations. Clay is processed into three different forms; tsa dam, kong dam, and jim dam. Each one is used for a specific purpose. Tsa dam is made by mixing clay powder with daesho (paper made from daphne plants) in the ratio of 7:3. If paper is not available, pulps made from the raw bark of daphne plant are used as substitute. This mixture prevents the mud from disintegrating when dried. Tsa dam is used for moulding the basic structure of the statue. Kong dam is prepared in the same way as tsa dam, but by adding more water to make the clay relatively thinner and softer. Kong dam is applied over the basic structure moulded from tsa dam to give proper shape to the statue. Generally the proprietor adds any or all of the seven precious substances (gold, silver, and turquoise, and coral, pearl, bronze and any other precious stones) to tsa dam and kong dam in order to increase the aura of the statue. Jim dam is applied as the final and finishing touch to the statue. To prepare jin dam; the clay powder is mixed with water and then stirred thoroughly until it turns into a thin paste. It is then filtered with the help of a thin cloth. The thin filtered paste is collected in a utensil and then placed on fire until the water component is evaporated. What is left in the pot is a very fine powder. This powder is then mixed with daphne papier mache to give it the binding strength which prevents the clay from cracking. This mixture is again mixed with water and stirred and applied to give the final touches to the statue. c. Process of Clay Sculpting: Clay sculpting process starts with the measurement of the space available where the statue will be kept later, or the size required by the owner/sponsor. Accordingly, the basic structural frame is made by using copper wires for smaller statues, iron or steel rods for bigger statues as support. Steel rods are wrapped with copper wire to add the value of the object. Gold and silver wires are considered the best to make the basic frame. The frame is added with tsa dam while the internal part is left hollow for zung to be inserted later. When the tsa dam on the structure dries perfectly, kong dam is applied over it to give all the external physical features, forms and the attires. The parts such as hands and head are made separately and attached later to the body for smaller statues, though the head of bigger statues are made directly with the statue. The sculptor must ensure that the parts made separately are proportionate to the whole structure. Any part of the statue that is not proportionate to the whole body is considered an impious act of the sculptor and therefore must be avoided at all cost. Sculpting is a tedious job, requiring the sculptor to apply the wooden chisel again and again to fill any gaps or remove the lumps over and over again. The statues are left for a long time to allow the clay to dry naturally, and to develop minor cracks which are also left unrepaired to allow air to pass for rapid drying. When no more cracks appear, it means the clay has dried up completely. The cracks are then repaired with tsa dam by mixing with glue. Once this is done, the sculptures are ready for final layers of finishing using jin dam. At this stage the sculpture is finally ready for zung (the inner relic). Learners have to undergo rigorous training for several years under a master sculptor known as Jimzo lopoen. As sculpting for religious purpose is considered a spiritual act, sculptors have to choose the most auspicious day and time to start a project. Once completed, an expert (usually a monk) will insert a zung shing or sog shing (a strut inside the statue as its backbone) and zung consisting of written mantras and other precious substances. Then the statue is painted using appropriate colours. Upon completion of all these steps, a drub or rabney ceremony is conducted by an accomplished lama. The painters and sculptors are highly regarded for their profession.