The Art of Calligraphy and writing is not only the fundamental need of academic knowledge but it is also an essential skill required preserving and promoting religious teachings. It not only requires academic intellects but most important the hand-skill of calligraphy. The origin of the calligraphy as per Lam (Spiritual master) Ugyen Tenzin Yoezer, popularly known as Lopen Nado, who was then the Advisor to the Department of Education on Dzongkha Development in Bhutan says that, there was a natural system of using words and phrases in oral communications such as conversations, discussions, and official announcements, consistent with the general practice. Development of the system of communication through the writing of letters and documentation had not been widespread. During the second visit of Guru Padmasambhava to Bumthang was in the 8th century, he was accompanied by one of his 25 principal disciples’ names Denmang Tsemang. At that time Guru Padmasambava gave the sacred teachings of the Secret Mantra to the King Sindhu Raja, but it was said that there was no system of writing in the country that time. So, it was Denma Tsemang who transcribed the transmitted teachings for the King’s practices and thus the beginning of the tradition of writing in Bhutan. Thereafter in the 15th century, Terton Pema Lingpa (1450-5121) transmitted the writing tradition to his heirs until the dawn of 17th century when Zhabdrung Ngawang Namgyal (1594-1651) established the State Government by initiating the Monastic Body where the Calligraphy section (Yig-zoi-de) was particularly set for the monks to impart and learn art of calligraphy. It was necessary not only or writing and learning for oneself but, for the woodblock engraving projects that was thriving in Punakha Dzong initiated mainly for the flourishment of the Buddhist teaching in the country. Later, the art was perpetuated and practiced by the successive Je Khenpos (chief abbot) and Druk Desis (temporal secular rulers) and Monarchs until now. Some of the remarkable calligraphers that are enlisted in the Bhutanese history were; 1.\tDenma Tsemang 9th century 2.\tNgawang Penjor as Dzongpon and Ngedup Penjor (1964) 3.\tDrungyig Zimchenpa Tandin Wanggyel 17th century 4.\tLopen Wangdue 17th century 5.\tLopen Phuentso 17th century 6.\tTshewang Dorji 17th century 7.\tLopen Gangchen, also called Kuenga Pelden, 19th century during the reign of Desi Jigma Namgyal (1825-1881) 8.\tDrungyig Tshewang Ngodrup, 19th century during the reign of His Majesty the 1st King Ugyen Wangchuck (1862–1926) 9.\tGonpo Tenzin from Lingzhi, 19th century during the reign of His Majesty the 1st King Ugyen Wangchuck 10.\tZhongar Dzongpon Kuenzang Wangdue, 20th century during the reign of His Majesty the 2nd King Jigme Wangchuck (1862–1926) 11.\tDrungyig Tsowo Dasho Kezang Dawa, during the reign of His Majesty the 2nd King Jigme Wangchuck (1862–1926) 12.\tTangbi Kezang, during the reign of His Majesty the 2nd King Jigme Wangchuck (1862–1926) 13.\tUra Yeshey Wangdi, during the reign of His Majesty the 2nd King Jigme Wangchuck (1862–1926) 14.\tSonam Peljor, 15.\tDasho Gaydon Thinley Dorji (?) 20th century during the reign of His Majesty the 2nd and 3rd King Jigme Dorji Wangchuck (1929–1972) 16.\tDasho Shingkhar Lam Kuenzang Wangchuk (?) 17.\tSey Dopola Aka Dasho Phuntsho Wangdi (1892-1953) 18.\tLam Norbu Wangchuk (?), 21st century during the reign of His Majesty the 4th King Jigme Singye Wangchuck (1955–) 19.\tYarab Aja Lama Drodul Zhenphen Dorji Tenzin (1921-2005) 20.\tLam Pema Tshewang, (1926-2009), 21.\tLopen Gonpo Tenzin from Chumey, Bumthang 22.\tLam Nado from Namgyal Dratshang (?) 23.\tDasho Tenzin Dorji (1928-2012) 24.\tLam Tenzin from Ramjar, Tashi Yangtse 25.\tChabje Geshey Gedhun Rinchen (1926-1997) 26.\tChabje Khenchen Ngawang Tenzin Doendup, 68th Je Khenpo (1925-2020) 27.\tLopen Daupo from Bartsham 28.\tLam Kuenzang Wangdi (aka Lam Nyingkhula) 29.\tLopen Yonten Gyaltshen, Central Monastic Body 30.\tDasho Sangay Wangchuk Generally, there are five types of calligraphy writing; U-chen (Block script), U-mey (Headless script), Len-tsa (Rajana script), War-tu (a type of Indian script) and finally the Jog-yig (the typical Bhutanese script). Amongst these scripts, Len-tsa and War-tu scripts are mainly used as decorative scripts, while U-chen is more common in writing Buddhist canons, ritual scripts and even for the formal corresponding letters and Jog-yig script is just for writing formal records and corresponding letters. Regarding U-mey script, though it is rare to its usage bring a Tibetan script but there are some calligraphers knowing how to write. However, the tradition of writing i.e. Calligraphy has been greatly hampered and left on the verge of dying tradition due to the emergence of computer technology and available fonts in the country. Yet, there are still well known and skilled calligraphers which are mostly used by His Majesty’s Kangyur Project for writing Golden Scriptures of Buddhist Canon and even by some individual Spiritual masters which have helped in reviving and revitalizing the art in the country.

China is the birthplace of Movable-Type Printing. In the middle of the 11th century, Bisheng invented Movable-Type Printing with clay characters. Later in the mid-12th century, Buddhist Sutra was printed with Wooden Movable-Type Printing in Western Xia Dynasty. Later, characters made of bronze and tin appeared. In the late 13th century, Wooden Movable-Type Printing became prevalent in eastern Zhejiang province and southern Anhui province, with which to print various books and genealogies of families and clans. According to the genealogical records of Wang Chaohui, one of the representative bearers of the Movable-Type Printing technique, as early as in the beginning of the 14th century his ancestor Wang Famao began compiling and printing genealogies for local people. From then on, this printing craftsmanship has been handed down by words of mouth from generations to generations through the family ties. From the relevant historical written records and the genealogies printed with Wooden characters preserved in the family for hundreds of years, we can learn that this printing technique has been inherited in Wang’s family continuously in 25 generations for nearly 700 years. In history, Wenzhou and its neighbouring areas of southeast Zhejiang province and northern Fujian province were typical immigrant society. According to the statistics of ‘Drafts of the General History of Zhejiang Recompiled’ of Republic of China, 141 clans had immigrated to Rui’an since the 10th century A.D. Referring to the 2003 issue of ‘Chronicles of Rui’an’, of presently 209 surnames in modern Rui’an, 178 are immigrated from other places. Wenzhou is also famous for its overseas Chinese population. At present, it has more than 430000 overseas Chinese all over the world. Consequently, whatever the origin, whether they were immigrated in past times, or in modern times, or emigrated abroad in all corners of the world, the people of Rui’an are affectionately attached to their homeland and have a strong traditional feeling of clans to find the roots of the families and ancestors. There is a tradition in families of the same clan living together, i.e., recompiling the genealogy of the clan to ensure that the blood lineage and family attribution can be traced no matter where the family members are. Because Wooden Movable-Type Printing is suitable for people working manually in a family, most importantly, with other factors such as easy to use, low in price, and strong traditional cultural concept, which makes it possible for the technique to be preserved and used till now. The above description demonstrates that even in face of today’s ever-developing modern printing, the traditional hand-operated printing technique can also have a certain market share, which ensures the technique to be passed on in Wang’s family from generations to generations. Up to December 2009, 11 major bearers of the Wooden Movable-Type Printing technique have been confirmed through general investigation. They are: Wang Chaohui, male, 55 (1955-12-28～), Lin Chuyin, male, 72 (1938-04-08～), Wang Chuanqiao, male, 54 (1956-08-12～), Wang Haiqiu, male, 54 (1956-02-25～), Wang Zhiren, male, 53 (1957-12-02～), Wu Kuizhao, male, 48 (1962-01-14～), Zhang Yishuo, male, 57 (1953-07-07～), Wang Chaohua, male, 56 (1954-08-16～), Pan Lijie, male, 53 (1957-07-18～), Pan Chaoliang, male, 57 (1953-09-03～), Wang Chaoxi, male, 52 (1958-08-12～), All of them have possessed a whole set of Wooden engraved Chinese characters. They complete the printing task entrusted by the clans in groups formed by either family members, relatives, or master-apprentices. In the division of labour, the representative bearer is responsible for undertaking orders and managing business. In general, men do the work of engraving characters, typesetting and printing which require higher level of techniques, while women do the work of page separating, binding, etc.

China 2010

National Intangible Cultural Heritage, Republic of Korea Jeontongjang refers to the skill of making a quiver (a long case for carrying arrows), or to an artisan with such a skill. On the Korean Peninsula, the skill started to develop as early as the Neolithic Age. Quivers appear in murals in Ssangyeongchong Tomb dating from Goguryeo (circa 37 BC – 667 AD). Quiver ornaments were unearthed from tombs dating from Silla (circa 57 BC – 935 AD) and Baekje (18 BC – 935 AD). The development of firearms after the Japanese Invasion of Korea (1592 – 1598) led to the decline of arrows and consequently, quivers. By the late Joseon Period (1392 – 1910), archery became a hobby and this affected the types of quivers used. Quivers were made of bamboo, paper, wood, or shark skin. Some of them were adorned with mother-of-pearl or engraved patterns. Bamboo quivers were made of transparent green-colored bamboo at least two years old. Bamboo pieces cut were stored in a shady place for more than two years and then put in watery caustic soda for three days to remove oily substance. The work was completed with the removal of nodes and the engraving of patterns.

Traditional pottery art in Bhutan is known in Dzongkha as Dza-zo and the artisans are Dza-khem; in Kurtoep dialect they’re known as Phreng, art, and Phreng cho-khan, artisans. Dza-zo traditional form of pottery falls within the scope of recognized traditional Bhutanese arts and crafts. Today, traditional artisans in Gangzur village in Gangzur village block, Lhuentse district continue to make Bhutanese pottery. The nearby village of Maenjabi in Maenbi block formerly practiced the art, but over the past twenty years lost its artisans to age and migration for work. Archaeological evidence shows that ceramics have been important from the time of early settlement in Bhutan. Earthen pots were used as household items in the absence of utensils made of copper, bronze, and iron as we know them today. With the visit of Guru Rinpoche to Bhutan in the 8th century, handicrafts were introduced to Bhutan, including Dza-zo pottery, which was then propagated by Drubchen Thangthong Gyalpo (1361-1485) and Rigzin Pema Lingpa (1450-1521) in the 14th and 15th centuries. The tradition of handicrafts reached its peak in the 17th century when Zhabdrung Ngawang Namgyel (1594-1651) took personal interest in arts such as Lhadri painting, patra engraving, tshem-zo embroidery, chag-zo blacksmithing, and troe-zo silversmithing. He reinforced the practice of these artisanal skills including pottery. Traditional pottery was first practiced in the villages of Rinpung in Paro, Wangbarma in Thimphu, Shar Goenkha in Wangdi and Gangzur in Lhuntse district. From these places, the skills and knowledge have been passed down from generation to generation until today.

Mr. Huỳnh Bá Quát played a pivotal role in introducing stone carving from Thanh Hóa to Non Nước. The villagers commemorate both the village festival and the anniversary of their ancestors' deaths on the sixteenth day of the third lunar month each year. For their part, the stone masons celebrate the arrival of spring with an ancestral ceremony on January 6. Stone carvers pass on their craft from father to son. Because the method of teaching the job is to teach the job by hand, the team of workers is divided into three basic levels: apprentices, secondảy workers, and master workers. Rough stone/marble miners are called “Civil Mandarin”. The worker who creates the raw product is called "Military Mandarin". Craft tools used in stone sculpture include sledgehammers, crowbars; the soar, the touch; nasal hooves; tarpaulin; nose tick; corn nose; Measure; saws sawing stones and saws cutting rings; drill; and grater. The process of developing a product involves mining and choosing raw stone, making blanks (figuring out the base, making drawings and prints, chiseling blanks, forming products), engraving patterns, embellishing forms, grinding and polishing products. To achieve a stunning color, the laborer needs to apply food coloring to the stone along with bits of green tea, brown shoe polish, and indigo. Based on usage, products include products serving daily needs (flower vases, column bases, teapots) and products serving spiritual needs (feng shui objects, statues, portraits, mausoleums, tombs).

The Bhutanese tradition of xylography and printing was begun in the 15th century by Terton (Hidden treasure discoverer) Pema Lingpa (1450-1521) and his sons, creating the root of virtues for the wellbeing of both living and dead in the country. Thereafter, the biography of the Terton and his collected works were printed on woodblocks and distributed to his residential monasteries and his patrons both in Bhutan and Tibet. Following the arrival of Zhabdrung Ngawang Namgyal (1594-1651) in Bhutan, the hitherto divided country was united under the main influence of the dual system of governance. Thereafter, the successive abbots of the monastic system and heads of the temporal system and then the successive far-sighted kings of the Wangchuck Dynasty, together with the heads of various other schools of Buddhism have continued to uphold the tradition. Skills training in woodblock making, engraving and printing were facilitated to provide sufficient copies of works on science and crafts, and the biographies and excellent teachings to be distributed to the communities of ordained monks and practitioners, dzongs and temples throughout the country. Therefore, Trashigang in the east, Trongsa in the centre, and Punakha and Paro in the west of the country became popular centres for such activities, until the reign of 3rd King Jigme Dorji Wangchuck (1928-1972). Starting 1970s, however, distribution has entered into a commercial phase, with increasing numbers of scriptural works being offset printed in India and then returned to Bhutan for distribution. At the same time, the interest in and practice of the traditional method of printing on woodblocks have been gradually losing their value among the users. Nowadays, printing machines have been set up in ever increasing numbers countrywide and these can produce, in larger quantities and within a very short time, scriptural volumes and other books that have a clear typeface, and are colourful and pleasing in appearance. On the one hand, this is a clear indication of progress in economic development, but on the other, this has become one of the main reasons for losing the precious heritage of woodblock print, among others.

Mongolian craftmanship have ancient crafts of ribbon-making such as zoos shiree (circled stitching), khosh (parallel bands), and gyarag bus (weaved sash). All are, however, rarely practiced nowadays. A field research group, studying Mongolian folklore, first discovered ribbon-making in 1982, along with khosh nekhekh-making in Omnogovi province in 1986 and gyarag bus-making in Dundgovi aimag in 1987, and brought them to the attention of the public. Consequently, several artisans have since taken up work on zoos shiree knitting, including D.Batbuyan and S.Khandmaa. Wood engraving artists have also come to specialize in zoos shiree making, such as B.Bayarsaikhan. Zoos shiree knitting is done in a number of different ways, using threads (from 3 to 12,24, and 32 threads at a time) and pieces of ribbon and rope (in groups of 1, 2, and 3). Nomadic artisans create such traditional patterns as khavtgai khee, 61- ziishtiu khee, khanan khee, and tagnai khee.

It is a woodblock print with brushstrokes, colored boards on dó paper, created by the community, with the content to reflect the agricultural society and farmers in Vietnam. There are 7 main themes (worship paintings, blessings, history, stories, proverbs, scenes and activities). The production process has 2 main stages: Creating patterns/carving boards and Printing/painting. Composing is a decisive stage, requiring many innate talents and high labor skills in artisans. Engraving board has 2 types, printed board and color printed board. Materials and tools for painting paintings include: do paper, assorted colors, color printing boards, printed boards, paperboards and squeakers (brushes made of pine needles). How to print pictures goes through many stages with different techniques. The art of Dong Ho paintings is symbolic, unique in the use of lines and colors. The content of the paintings reflects the social life from the point of view of folk aesthetics. There are currently only a few families in Dong Ho making prints.

Art metal processing works made by masters found in museum funds of Kyrgyzstan and those that are passed from generation to generation shows that the Kyrgyz possessed metal processing techniques from the ancient times. The Kyrgyz metalwork masters are named as ‘usta’ or ‘zergher’. Distinct features of different techniques of metalworking can be observed in the works of the Kyrgyz masters, such as forging, molding, appliqueing, notching metal with silver, engraving, minting, pattern plating, pelleting, fretwork and black finishing. Silver is the most common metal used by the Kyrgyz. Masterpieces distinct to the Kyrgyz jewelry making have been created with a help of simple tools used in metalworking. The kit of jeweler’s main instruments included an anvil, hammers for different purposes, dies, stamps, chisels, puncheons, mandrels, cutters, poin-tools, etc. Motives of the ornaments used in jewelry and metal works are very diverse. Of a particular interest are the Kyrgyz traditions of metalworking expressed in details of the horse equipment. They are richly decorated with metal braces covering joints of belts made by embossing technique and notching. Kyrgyz jewelers broadly used the technique of denting, that is coating notched iron plates with silver. Such coated plates of different size and forms were then used to embellish harness elements, man’s belts, knives, fire stones, trunks, cases for dishes, etc. Quite often jewelry articles were framed with granules. This technique was primarily used in woman’s adornments, such as ear-rings, rings, seal-rings, bracelets, and etc. Like formerly, granulation was combined with filigreeing and incrustation. Community of craftspeople metalworking was a purely masculine craft, but women zergers are also known.

Carpentry of Kim Bồng is a traditional craft that was formed around the 15th century, associated with the migration of residents from the Northern Delta and Thanh Nghệ Tĩnh. Carpentry includes groups of occupations: construction carpentry, household carpentry, fine art carpentry and boat building carpentry. Sophisticated manual techniques of carving, engraving, closing, chiseling, chiseling, drilling, cutting... combined with natural materials: wood, bamboo... have created unique products with their own identity: houses, boats, tables, chairs, wooden cabinets, Buddha statues, boats... Carpentry of Kim Bồng festival is held on January 12 every year to pay tribute to the ancestors and founders of the profession at Tiền Hiền communal house. Each work created by Kim Bồng carpentry artisans has special artistic value and value for the traditional craft village, while affirming the special values ​​that Kim Bong carpentry brings to the community and society.

Statuette crafts are made by moulding a particular material into a cast and then preparing in a variety of ways, including baking, glazing and smoking. The special cast is made based on the traditions of stone and bone engraving crafts. Papier-mache is created by pasting layers of light paper on a special wooden or earth cast. Tsaasan shuumal or papier-mache is made with the ingemel technique, which is the making of reliefs on objects. Ingemel or relief has the following four types: a) khotgor ingemel (flute relief), b) tövgör ingemel (semi-fillet relief), c) tovgor ingemel (fillet relief) and d) büten tovoimol (sculpture-like relief).Shüren shuumal is created by putting a cover of big and small pieces of corals on the papier-mache.

As one of the conventional skills, China Engraved Block Printing Technique includes a series of processes: cutting tools are applied to the engraving of characters or patterns on wooden blocks, ink and paper are utilized for printing purpose and the printed book pages are bound into books. Historical cultural relics show the application of engraved block printing technique dates back to the end of the 6th century and early 7th century. The invention and application of engraved block printing technique in China has made tremendous contributions to the progress and development of human civilization thanks to its functions typical of recording and transmitting thoughts, knowledge and experience of human society.

China 2009