PI00008001

#bhutan #bhutantravel #bhutanculture #유네스코아태무형유산센터 #unesco The Bhutanese tradition of xylography and printing was begun in the 15th century by Terton (Hidden treasure discoverer) Pema Lingpa (1450-1521) and his sons, creating the root of virtues for the wellbeing of both living and dead in the country. Thereafter, the biography of the Terton and his collected works were printed on woodblocks and distributed to his residential monasteries and his patrons both in Bhutan and Tibet. Following the arrival of Zhabdrung Ngawang Namgyal (1594-1651) in Bhutan, the hitherto divided country was united under the main influence of the dual system of governance. Thereafter, the successive abbots of the monastic system and heads of the temporal system and then the successive far-sighted kings of the Wangchuck Dynasty, together with the heads of various other schools of Buddhism have continued to uphold the tradition. Skills training in woodblock making, engraving and printing were facilitated to provide sufficient copies of works on science and crafts, and the biographies and excellent teachings to be distributed to the communities of ordained monks and practitioners, dzongs and temples throughout the country. Therefore, Trashigang in the east, Trongsa in the centre, and Punakha and Paro in the west of the country became popular centres for such activities, until the reign of 3rd King Jigme Dorji Wangchuck (1928-1972). Starting 1970s, however, distribution has entered into a commercial phase, with increasing numbers of scriptural works being offset printed in India and then returned to Bhutan for distribution. At the same time, the interest in and practice of the traditional method of printing on woodblocks have been gradually losing their value among the users. Nowadays, printing machines have been set up in ever increasing numbers countrywide and these can produce, in larger quantities and within a very short time, scriptural volumes and other books that have a clear typeface, and are colourful and pleasing in appearance. On the one hand, this is a clear indication of progress in economic development, but on the other, this has become one of the main reasons for losing the precious heritage of woodblock print, among others. [Transmission method] In Bhutan, the transmission of the knowledge and skills related to Xylography printing is usually undertaken by teaching or engaging the interested candidates in the printing process. The process normally requires two persons for better results, but one person alone can also do the job in cases of urgency when there is no one else available to help. The woodblock is first placed flat on a printing bench. The following steps are followed for printing. For more information please visit https://www.ichlinks.com/archive/elements/elementsV.do?nation=BT&page=1&urlAnchor=txt&elementsUid=13874510342886677176&mode=grid&searchText=printing&orderCd=A&countrys=BT

PI00007999

#bhutan #bhutantravel #bhutanculture #유네스코아태무형유산센터 #unesco The Bhutanese tradition of xylography and printing was begun in the 15th century by Terton (Hidden treasure discoverer) Pema Lingpa (1450-1521) and his sons, creating the root of virtues for the wellbeing of both living and dead in the country. Thereafter, the biography of the Terton and his collected works were printed on woodblocks and distributed to his residential monasteries and his patrons both in Bhutan and Tibet. Following the arrival of Zhabdrung Ngawang Namgyal (1594-1651) in Bhutan, the hitherto divided country was united under the main influence of the dual system of governance. Thereafter, the successive abbots of the monastic system and heads of the temporal system and then the successive far-sighted kings of the Wangchuck Dynasty, together with the heads of various other schools of Buddhism have continued to uphold the tradition. Skills training in woodblock making, engraving and printing were facilitated to provide sufficient copies of works on science and crafts, and the biographies and excellent teachings to be distributed to the communities of ordained monks and practitioners, dzongs and temples throughout the country. Therefore, Trashigang in the east, Trongsa in the centre, and Punakha and Paro in the west of the country became popular centres for such activities, until the reign of 3rd King Jigme Dorji Wangchuck (1928-1972). Starting 1970s, however, distribution has entered into a commercial phase, with increasing numbers of scriptural works being offset printed in India and then returned to Bhutan for distribution. At the same time, the interest in and practice of the traditional method of printing on woodblocks have been gradually losing their value among the users. Nowadays, printing machines have been set up in ever increasing numbers countrywide and these can produce, in larger quantities and within a very short time, scriptural volumes and other books that have a clear typeface, and are colourful and pleasing in appearance. On the one hand, this is a clear indication of progress in economic development, but on the other, this has become one of the main reasons for losing the precious heritage of woodblock print, among others. [Transmission method] In Bhutan, the transmission of the knowledge and skills related to Xylography printing is usually undertaken by teaching or engaging the interested candidates in the printing process. The process normally requires two persons for better results, but one person alone can also do the job in cases of urgency when there is no one else available to help. The woodblock is first placed flat on a printing bench. The following steps are followed for printing. For more information please visit https://www.ichlinks.com/archive/elements/elementsV.do?nation=BT&page=1&urlAnchor=txt&elementsUid=13874510342886677176&mode=grid&searchText=printing&orderCd=A&countrys=BT

PI00006836

The Bhutanese tradition of xylography and printing was begun in the 15th century by Terton (Hidden treasure discoverer) Pema Lingpa (1450-1521) and his sons, creating the root of virtues for the wellbeing of both living and dead in the country. Thereafter, the biography of the Terton and his collected works were printed on woodblocks and distributed to his residential monasteries and his patrons both in Bhutan and Tibet. Following the arrival of Zhabdrung Ngawang Namgyal (1594-1651) in Bhutan, the hitherto divided country was united under the main influence of the dual system of governance. Thereafter, the successive abbots of the monastic system and heads of the temporal system and then the successive far-sighted kings of the Wangchuck Dynasty, together with the heads of various other schools of Buddhism have continued to uphold the tradition. Skills training in woodblock making, engraving and printing were facilitated to provide sufficient copies of works on science and crafts, and the biographies and excellent teachings to be distributed to the communities of ordained monks and practitioners, dzongs and temples throughout the country. Therefore, Trashigang in the east, Trongsa in the centre, and Punakha and Paro in the west of the country became popular centres for such activities, until the reign of 3rd King Jigme Dorji Wangchuck (1928-1972).

PI00007989

#bhutan #bhutantravel #bhutanculture #유네스코아태무형유산센터 #유네스코 Yig-par koni is an adverb that means engraving of scripts which is the art of Xylography, one of the indigenous craftsmanship art of Bhutan. Script engraving is done using special wood locally called Tag-pa shing (Birch: Betula utilis) that flourishes at altitudes varying from 3000 to 4200 meters above sea level. Tag-pa shing can be easily identified by its bark that has a mix red and pink and brown colours alternatively across the trunk like that of a tiger’s skin thus got its name. The art is considered as one of the religious craftsmanship since its significance, production and usage are all connected to spiritualistic believes and purpose. In Bhutan, the presence of skills for making woodblock prints are seen in temples, monasteries and Dzongs (fortress) every part of the country in the form of biographies, excellent teachings of the Buddha printed from woodblocks. The earliest biography is that of Terton (Hidden treasure discoverer) Pema Lingpa (1450-1521), as prophesied by Guru Padmasambava, the epitome of the Secret Teachings of Tantric Buddhism. Terton Pema Lingpa was the last reincarnate of Princess Pema Sal (?), daughter of King Thrisong Deutsan of Tibet. Owing to the propensity of his previous lives, the Terton knew craft works without training, and dedicating his skills to ensure the continuity of the Buddha’s teachings, had made uncountable number woodblocks, available in the monasteries established by the Terton himself and by his sons as well as in the house of a number of his patrons that can be seen even today. Moreover, Thugse Dawa Gyaltshan (1499-1586), the son of Pema Lingpa, had also engraved as many as 614 woodblocks for the collected works and autobiography in memory of his father which is still preserved at the sacred place of Kunzang Drag, Bumthang Dzongkhag (district). After Terton Pema Lingpa and his heart son Thugse Dawa Gyaltshen had started the tradition of woodblock print, Choje Ngagwang Tenzin (1522-1590), the reincarnate of Gartoen who was the son of Phajo Drugom Zhigpo, engraved the biography of Phajo Drugom in about 1570 (C.E). Then, in the 17th century Zhabdrung Ngawang Namgyal, having satisfactorily completed all the activities related to the dual system and before he went into the final retreat (i.e. parinirvana), initiated a project to engrave the collected works of the omniscient Pema Karpo (1527-1592) and all the essential ones and its prints are distributed them to all the monasteries and sangha communities as dharma donations. He created of the seat of Je Khenpo as the overall head of sangha monasteries and ecclesiastical affairs and that of Desi, who functioned as the secular head of the country. He had also appointed officials to fit these high-ranking positions. The successive Je Khenpo and Desis ensured the practice, manage and spread of the teachings and the good system of administration, by engraving unlimited number of woodblocks prints in their respective areas which can be seen still today in all the historical monuments. However, due to the advancement of printing technologies, the National Library & Archives of Bhutan is the only institution that is upholding the xylography art in the country while the practice is turned its form to an oral account. For more information https://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874508750347675141

PI00008000

#bhutan #bhutantravel #bhutanculture #유네스코아태무형유산센터 #unesco The Bhutanese tradition of xylography and printing was begun in the 15th century by Terton (Hidden treasure discoverer) Pema Lingpa (1450-1521) and his sons, creating the root of virtues for the wellbeing of both living and dead in the country. Thereafter, the biography of the Terton and his collected works were printed on woodblocks and distributed to his residential monasteries and his patrons both in Bhutan and Tibet. Following the arrival of Zhabdrung Ngawang Namgyal (1594-1651) in Bhutan, the hitherto divided country was united under the main influence of the dual system of governance. Thereafter, the successive abbots of the monastic system and heads of the temporal system and then the successive far-sighted kings of the Wangchuck Dynasty, together with the heads of various other schools of Buddhism have continued to uphold the tradition. Skills training in woodblock making, engraving and printing were facilitated to provide sufficient copies of works on science and crafts, and the biographies and excellent teachings to be distributed to the communities of ordained monks and practitioners, dzongs and temples throughout the country. Therefore, Trashigang in the east, Trongsa in the centre, and Punakha and Paro in the west of the country became popular centres for such activities, until the reign of 3rd King Jigme Dorji Wangchuck (1928-1972). Starting 1970s, however, distribution has entered into a commercial phase, with increasing numbers of scriptural works being offset printed in India and then returned to Bhutan for distribution. At the same time, the interest in and practice of the traditional method of printing on woodblocks have been gradually losing their value among the users. Nowadays, printing machines have been set up in ever increasing numbers countrywide and these can produce, in larger quantities and within a very short time, scriptural volumes and other books that have a clear typeface, and are colourful and pleasing in appearance. On the one hand, this is a clear indication of progress in economic development, but on the other, this has become one of the main reasons for losing the precious heritage of woodblock print, among others. [Transmission method] In Bhutan, the transmission of the knowledge and skills related to Xylography printing is usually undertaken by teaching or engaging the interested candidates in the printing process. The process normally requires two persons for better results, but one person alone can also do the job in cases of urgency when there is no one else available to help. The woodblock is first placed flat on a printing bench. The following steps are followed for printing. For more information please visit https://www.ichlinks.com/archive/elements/elementsV.do?nation=BT&page=1&urlAnchor=txt&elementsUid=13874510342886677176&mode=grid&searchText=printing&orderCd=A&countrys=BT

PI00007998

#bhutan #bhutaneseculture #bhutantravel #유네스코아태무형유산센터 #unesco Dey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combine, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne. The white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose. Generally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing. Perhaps, the paper making art must have been existed in the early centuries, even before the use of words and sentences, when pictures and symbols were used as a means of communication in Bhutan as the Padma chronicles mention that "the king ordered paper to be collected in the land of the Mon." This was when the Dharma King Trisong Detsen (755-804) of invited Guru Padmasambava to Tibet in the 8th century and introduced the Tantric teachings to that land. Having completed the construction of Samye Monastery, translation of Buddha's precepts and commentary texts that are written in Sanskrit were initiated into Tibetan language through Indian pandits and incarnate translators from Tibet, but there was not enough paper in Tibet. So the king imported huge amounts of paper from the southern country (Bhutan), which enabled Tibet to produce many volumes of the scriptures. This means that trade between Tibet and Bhutan was already active at that time. The so-called shog-tang (shog-ltang), a cargo size of 1000 sheets of Daphne paper, were transported to Tibet in large quantities for trade purposes. This means that very early in history, papermaking was passed down from generation to generation, from father to son, from son to son, and so on. Gradually, as the demand for paper increased, the paper industry in the country expanded, especially in the 17th century when great changes took place in the country after the arrival of Zhabdrung Ngawang Namgyal (1594-1651). At that time, the demand for paper increased greatly at the central government, monastic community and monastery levels, leading to a nationwide expansion in the production and use of paper especially for printing purpose. Paper manufacturing units were instituted in Dzongs and employed five people either form the monastic body or from the lay citizens for papermaking. The raw materials such as daphne bark, ash, etc. were supplied by the residents of the respective dzongkhag as tax. The dzongkhag administrations then transported the paper cargoes to the central government and ensured proper remuneration. The skilled workers at the papermaking centers were also appointed from the villages and households in the district, who were exempt from other charges such as labor, fodder, firewood, and pounded rice. A load Shog-tang as mentioned above, was a bundle of 1000 sheets of paper. (Lam Kezang Chophel, 2021). Normally a single sheet of paper measures approximately 75x110 cm and colloquially it is called pheg-pang. Although, papermaking was once a thriving art until 1970 yet, due to the development progress in the country and introduction of imported papers such as books and note books has gradually affected in declining number of paper production centres in the country. For more information https://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874507459569673284

PI00006835

The Bhutanese tradition of xylography and printing was begun in the 15th century by Terton (Hidden treasure discoverer) Pema Lingpa (1450-1521) and his sons, creating the root of virtues for the wellbeing of both living and dead in the country. Thereafter, the biography of the Terton and his collected works were printed on woodblocks and distributed to his residential monasteries and his patrons both in Bhutan and Tibet. Following the arrival of Zhabdrung Ngawang Namgyal (1594-1651) in Bhutan, the hitherto divided country was united under the main influence of the dual system of governance. Thereafter, the successive abbots of the monastic system and heads of the temporal system and then the successive far-sighted kings of the Wangchuck Dynasty, together with the heads of various other schools of Buddhism have continued to uphold the tradition. Skills training in woodblock making, engraving and printing were facilitated to provide sufficient copies of works on science and crafts, and the biographies and excellent teachings to be distributed to the communities of ordained monks and practitioners, dzongs and temples throughout the country. Therefore, Trashigang in the east, Trongsa in the centre, and Punakha and Paro in the west of the country became popular centres for such activities, until the reign of 3rd King Jigme Dorji Wangchuck (1928-1972).

PI00007997

#bhutan #bhutaneseculture #bhutantravel #유네스코아태무형유산센터 #unesco Dey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combine, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne. The white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose. Generally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing. Perhaps, the paper making art must have been existed in the early centuries, even before the use of words and sentences, when pictures and symbols were used as a means of communication in Bhutan as the Padma chronicles mention that "the king ordered paper to be collected in the land of the Mon." This was when the Dharma King Trisong Detsen (755-804) of invited Guru Padmasambava to Tibet in the 8th century and introduced the Tantric teachings to that land. Having completed the construction of Samye Monastery, translation of Buddha's precepts and commentary texts that are written in Sanskrit were initiated into Tibetan language through Indian pandits and incarnate translators from Tibet, but there was not enough paper in Tibet. So the king imported huge amounts of paper from the southern country (Bhutan), which enabled Tibet to produce many volumes of the scriptures. This means that trade between Tibet and Bhutan was already active at that time. The so-called shog-tang (shog-ltang), a cargo size of 1000 sheets of Daphne paper, were transported to Tibet in large quantities for trade purposes. This means that very early in history, papermaking was passed down from generation to generation, from father to son, from son to son, and so on. Gradually, as the demand for paper increased, the paper industry in the country expanded, especially in the 17th century when great changes took place in the country after the arrival of Zhabdrung Ngawang Namgyal (1594-1651). At that time, the demand for paper increased greatly at the central government, monastic community and monastery levels, leading to a nationwide expansion in the production and use of paper especially for printing purpose. Paper manufacturing units were instituted in Dzongs and employed five people either form the monastic body or from the lay citizens for papermaking. The raw materials such as daphne bark, ash, etc. were supplied by the residents of the respective dzongkhag as tax. The dzongkhag administrations then transported the paper cargoes to the central government and ensured proper remuneration. The skilled workers at the papermaking centers were also appointed from the villages and households in the district, who were exempt from other charges such as labor, fodder, firewood, and pounded rice. A load Shog-tang as mentioned above, was a bundle of 1000 sheets of paper. (Lam Kezang Chophel, 2021). Normally a single sheet of paper measures approximately 75x110 cm and colloquially it is called pheg-pang. Although, papermaking was once a thriving art until 1970 yet, due to the development progress in the country and introduction of imported papers such as books and note books has gradually affected in declining number of paper production centres in the country. For more information https://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874507459569673284

PI00007996

#bhutan #bhutaneseculture #bhutantravel #유네스코아태무형유산센터 #unesco Dey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combine, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne. The white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose. Generally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing. Perhaps, the paper making art must have been existed in the early centuries, even before the use of words and sentences, when pictures and symbols were used as a means of communication in Bhutan as the Padma chronicles mention that "the king ordered paper to be collected in the land of the Mon." This was when the Dharma King Trisong Detsen (755-804) of invited Guru Padmasambava to Tibet in the 8th century and introduced the Tantric teachings to that land. Having completed the construction of Samye Monastery, translation of Buddha's precepts and commentary texts that are written in Sanskrit were initiated into Tibetan language through Indian pandits and incarnate translators from Tibet, but there was not enough paper in Tibet. So the king imported huge amounts of paper from the southern country (Bhutan), which enabled Tibet to produce many volumes of the scriptures. This means that trade between Tibet and Bhutan was already active at that time. The so-called shog-tang (shog-ltang), a cargo size of 1000 sheets of Daphne paper, were transported to Tibet in large quantities for trade purposes. This means that very early in history, papermaking was passed down from generation to generation, from father to son, from son to son, and so on. Gradually, as the demand for paper increased, the paper industry in the country expanded, especially in the 17th century when great changes took place in the country after the arrival of Zhabdrung Ngawang Namgyal (1594-1651). At that time, the demand for paper increased greatly at the central government, monastic community and monastery levels, leading to a nationwide expansion in the production and use of paper especially for printing purpose. Paper manufacturing units were instituted in Dzongs and employed five people either form the monastic body or from the lay citizens for papermaking. The raw materials such as daphne bark, ash, etc. were supplied by the residents of the respective dzongkhag as tax. The dzongkhag administrations then transported the paper cargoes to the central government and ensured proper remuneration. The skilled workers at the papermaking centers were also appointed from the villages and households in the district, who were exempt from other charges such as labor, fodder, firewood, and pounded rice. A load Shog-tang as mentioned above, was a bundle of 1000 sheets of paper. (Lam Kezang Chophel, 2021). Normally a single sheet of paper measures approximately 75x110 cm and colloquially it is called pheg-pang. Although, papermaking was once a thriving art until 1970 yet, due to the development progress in the country and introduction of imported papers such as books and note books has gradually affected in declining number of paper production centres in the country. For more information https://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874507459569673284