The word “Batik” means “drawing out with wax”. The coloured and patterned cloth has gained popularity not only in Malaysia but also in international fashion scenes. This fabric normally carries motifs that reflect the flora and fauna, geometry and landscape of nature. Terengganu Batik is renowned for its vibrant colours, bold prints and its versatility. It is soft, light and breezy and very well suited for the summer and tropical climate and its fabric is made into shirts, dresses, crepe de chine, scarves, kaftans, sarongs, pillow cases, bags, table cloths and many more items. There are two types of batik, the hand drawn and the block print. The hand drawn is based on the artist’s imagination and creativity. The artist begins by using a small pen-like container filled with hot-melted wax. It is then hand-drawn onto a white fabric with hot liquid wax creating a design. Brushes are then used to paint dyes within the outlines, thus allowing for the creation of shaded and multihued designs. The gracefulness and speed of their freehand never ceases to amaze one’s attention. It is a beauty of the highest form of traditional batik where each hand-drawn article of clothing is unique. The block print batik uses either a copper or a wooden block that looks like a domestic iron, artistically designed with intricate patterns. The block is dipped in a hot melted wax and press printed on the white cloth, which is then dyed in the colours required, rinsed and dried. Many contemporary designers also incorporate elements of this ancient craft into their colourful creations. Today, batik is not only used for outfits, but innovative commercial uses of this beautiful and artistic textile are made into bags, cushion covers, curtains, slippers etc.

Art metal processing works made by masters found in museum funds of Kyrgyzstan and those that are passed from generation to generation shows that the Kyrgyz possessed metal processing techniques from the ancient times. The Kyrgyz metalwork masters are named as ‘usta’ or ‘zergher’. Distinct features of different techniques of metalworking can be observed in the works of the Kyrgyz masters, such as forging, molding, appliqueing, notching metal with silver, engraving, minting, pattern plating, pelleting, fretwork and black finishing. Silver is the most common metal used by the Kyrgyz. Masterpieces distinct to the Kyrgyz jewelry making have been created with a help of simple tools used in metalworking. The kit of jeweler’s main instruments included an anvil, hammers for different purposes, dies, stamps, chisels, puncheons, mandrels, cutters, poin-tools, etc. Motives of the ornaments used in jewelry and metal works are very diverse. Of a particular interest are the Kyrgyz traditions of metalworking expressed in details of the horse equipment. They are richly decorated with metal braces covering joints of belts made by embossing technique and notching. Kyrgyz jewelers broadly used the technique of denting, that is coating notched iron plates with silver. Such coated plates of different size and forms were then used to embellish harness elements, man’s belts, knives, fire stones, trunks, cases for dishes, etc. Quite often jewelry articles were framed with granules. This technique was primarily used in woman’s adornments, such as ear-rings, rings, seal-rings, bracelets, and etc. Like formerly, granulation was combined with filigreeing and incrustation. Community of craftspeople metalworking was a purely masculine craft, but women zergers are also known.

Like in many other countries, dozo (masonry or stonework) is an old craft that is still in practice throughout the country. The skills of Bhutanese masonry can be seen in fortresses, temples, monasteries, stupas and farmhouses. It required special skills to cut and polish stones into right shapes and sizes and was carried out under the strict supervision of the head carpenter, who also had the role of an architect. Stone masons use an axe like tool called dota. Stones of crude shapes and sizes are chiselled into right shapes according to the style of the structure. There are mainly five different types of stone shapes that the masons prepare for construction. They are jamdo- used as the foundation stones, zurdo (corner stone) used as the corners walls, tshigdo (flat stones) that are used in the middle, dotru (pebbles) used in between the two chiseled stones and dochal (flat stones) layed in the courtyards of the dzong and temples. A skilled mason would first lay the zurdo (corner stone) and position other stones towards its right and left. The masons used a measuring thread called thig to correctly align these stones. People from Rinchengang village in Wangdue Phodrang Dzongkhag are well known for their great masonry skills. Most villages in the western part of Bhutan use mud, instead of stones for house construction as mud houses are believed to keep the interior warm in winter and cool in summer. It also depended on the type of construction materials available. Some of the outstanding stone works are; a. Dzongs: Bhutan is dotted with these majestically erected fortresses that sit high on top of the hills often overlooking the valleys. The dzongs are located at strategic places. It has massive stone walls with large courtyards and beautiful woodwork on windows and cornices which are the most striking among the diverse architectural expressions of the country. These structures had served the purpose of defending the country against foreign invasions in the past. These magnificent structures are the true representation of our architectural uniqueness and the living testimony of our artistic skills. Dzongs are mostly rectangular and square structures while ta-dzong (watch towers) and Chu-dzong are mostly round cylindrical structures. Today, these dzong are the seat of administration and monastic body. b. Stupas: Choeten or stupas are literally translated as a vessel of worship or offering the most common feature on the Bhutanese landscape. It is believed that after the cremation of the Lord Buddha, his relics were divided among eight groups of claimants and that each of the claimants later erected a reliquary in which they preserved the relics. Thus, there are eight different types of choeten today (Choeten Degye). At that time, these structures were erected only to preserve the relics of sublime beings and assumed greater meaning and significance much later. Building a stupa came to be considered an act of great piety, earning merit for the actual builders as well as for those who supported the act. It is also a beautiful illustration of our masonry skills. A choeten requires a great deal of stonework, as it is built out of stones. We can also see prayer mantras carved on the stones. c. Long Prayer Walls: Long mani walls locally known as mani dang rim are the monuments from medieval Bhutan found along the main mule tracks displaying the mantra of Avalokiteshvara carved on slabs of slates. These elegant monuments were testimony to the richness of spiritual devotions as well as significant landmarks for travelers. They have survived extreme climatic conditions for many years. It is said that construction of Mani walls in the country had begun around 15th century during the time of Tertoen Pema Lingpa. However, most of the Mani walls were said to be constructed during the reign of the 4th Druk Desi Tenzin Rabgye (1638-96). Mani walls were largely constructed with locally available materials such as stones, a small quantity of timber and mud used as the mortar. Side plinth is raised from the ground and a wall is constructed at the height of about 6 feet and generally carved Mani slabs are placed on it either in single or double line from end to end. A timber superstructure is raised on the top with a wall height of one foot and is often roofed with flat stone slabs or slate. The middle and two ends are raised higher than the other parts with a particular architectural design. The center portion has a pocket for enshrining three deities of Manjushri (left), Avalokiteshvara (centre) and Vajrapani (right). The special place in the centre is made of timber and the deities are placed on the wall with a space in front for making butter lamp offerings or other offerings. d. Farm Houses: Bhutanese farmhouses are typically built out of mud and stone. A standard practice was to erect two-storied house although an ideal house had three main floors and an attic. The materials for the houses vary across the country depending on the climatic conditions and the topography of the places. For instance, Bago and Dag jar Zhikom (farmhouses made out of stones and wood) which are lightly decorated in traditional style are found in the southern and eastern parts of Bhutan. In central and western Bhutan, double storey houses with main walls made of stones and rammed earth while the inner partitions are made of bamboo mats are found. Houses in the cold places like Lingzhi and Laya, Merak and Sakteng are mostly built out of stonewall. e. Grinding Stones: Rangtha is a pair of round grinding stones that is maneuvered by the hands. This is usually found in places where stream water is not available in the vicinity. Chura is a bigger version of the rangtha which is powered by water. While the stone pair works on the same principle, the watermills are much bigger in size and often turn faster depending on the pace of the water flow. It is still being used in some rural villages. For example, in Bumthang it is mostly used for grinding wheat and buckwheat. f. Bridges: Stonework also finds its use in the construction of the traditional bridges, which were built out of wood and stones. The stone is used as the foundation (jamdo) for constructing all sorts of bridges like chazam (iron bridges), bazam (cantilever bridges) and tshazam (cane bridges which are no longer used).

Nowadays, as the metallurgical industry grows, most of the daily necessities of the metal are imported cheaply, which causes the number of local blacksmiths, a traditional man-made and time-consuming craft, to dwindle. However, blacksmithing in Cambodia still operates in some parts of the country, as some people still cling to traditional products because of their good quality and durability. On the other hand, it is well known that daily necessities such as rakes, buckets, sickles, knives, etc. are still essential for farmers. Therefore, in some rural areas, between two and three villages, there is at least one blacksmith house that produces utilities to supply the villagers. But if the blacksmith is near the town, the tools they make can be in large quantities and sold to other areas. Shortly after the end of World War II, the Kuay, a kind of indigenous group who lived in small communities in the northern part of Cambodia, in the Phnom Dek area of Preah Vihear province, continued to smelt iron ore. The steel produced by Kuy is very good in quality and is distributed throughout Cambodia and as far as the central region of Laos. Nowadays, this traditional smelting is no longer available, because the iron used for daily necessities is imported, or else they often use scrap metal or other broken objects, such as car chainsaws…etc. because it is cheaper. To make a tool, one has to cut a piece of metal as similar size as the tool he/she wants to make and burn it until it turns red like a fire. Then hammer it. This is done a few times until the metal appears in the desired shape and then put it in water. The procedure must be done carefully, otherwise, it will make the tool fragile and not sharp (if it is a knife or an ax). Finally, sharpen the tool so that it is smooth and sharp. According to the observation, the blacksmith business can be divided into three levels such as the family blacksmith in the village, where the villagers often rent a cage or make a hoe, knife, ax, and so on. The second level is the group of blacksmiths in the market who do business together. Hundreds of identical items are produced for sale at the market. The third level is the blacksmith community, which involves smelting iron as an important business for the community. There are not many blacksmiths in this community, however, there are two places still available, one at Oleung, Kampong Cham province, and the other at School No. 5 in Kampong Chhnang province. The ax and knife made in O Leung are still famous today, despite some changes. Nowadays, the traditional steel industry has completely disappeared and the local steel industry tradition is gradually declining due to the influx of modern industry from abroad.