PI00005598

Valuable by the quality of the paper used, the texts printed from woodblocks are considered blessed and sacred. Their contents are authentic. These texts are read, recited, and even paraded around the village to wharf off evil spirits and bless the land with timely rain, bountiful harvest, peace, and tranquility. Both the engraving process and products are integral to Bhutan's Intangible Cultural Heritage.

PI00005597

Thus, in fortresses, monasteries, temples, and even in some private houses in Bhutan, huge collections of ancient scriptures are found.

PI00005596

In Buddhist context, engraved woodblocks are highly revered as they commemorate Buddha and other enlightened beings. The holy textual scriptures as well as woodblocks represents their speech.

PI00005595

Large volumes of texts are printed from printing houses and distributed to needy institutions, and also sold for the institution development purpose.

PI00005594

Usage of Woodblocks The engraved woodblocks are used mainly for printing religious texts and other religious purposes for mass publication and to flourish the sacred teaching.

PI00005593

Proper stacking and care should be maintained to locaet the woodblocks. It is recommended not to stack one another on the top since there is high risk of breaking the scripts when it is being used. Therefore, woodblocks should always be stacked in a horizontal standing position with a foam sheet cut in its size and insert between the woodblocks to protect the engraved scripts.

PI00007989

#bhutan #bhutantravel #bhutanculture #유네스코아태무형유산센터 #유네스코 Yig-par koni is an adverb that means engraving of scripts which is the art of Xylography, one of the indigenous craftsmanship art of Bhutan. Script engraving is done using special wood locally called Tag-pa shing (Birch: Betula utilis) that flourishes at altitudes varying from 3000 to 4200 meters above sea level. Tag-pa shing can be easily identified by its bark that has a mix red and pink and brown colours alternatively across the trunk like that of a tiger’s skin thus got its name. The art is considered as one of the religious craftsmanship since its significance, production and usage are all connected to spiritualistic believes and purpose. In Bhutan, the presence of skills for making woodblock prints are seen in temples, monasteries and Dzongs (fortress) every part of the country in the form of biographies, excellent teachings of the Buddha printed from woodblocks. The earliest biography is that of Terton (Hidden treasure discoverer) Pema Lingpa (1450-1521), as prophesied by Guru Padmasambava, the epitome of the Secret Teachings of Tantric Buddhism. Terton Pema Lingpa was the last reincarnate of Princess Pema Sal (?), daughter of King Thrisong Deutsan of Tibet. Owing to the propensity of his previous lives, the Terton knew craft works without training, and dedicating his skills to ensure the continuity of the Buddha’s teachings, had made uncountable number woodblocks, available in the monasteries established by the Terton himself and by his sons as well as in the house of a number of his patrons that can be seen even today. Moreover, Thugse Dawa Gyaltshan (1499-1586), the son of Pema Lingpa, had also engraved as many as 614 woodblocks for the collected works and autobiography in memory of his father which is still preserved at the sacred place of Kunzang Drag, Bumthang Dzongkhag (district). After Terton Pema Lingpa and his heart son Thugse Dawa Gyaltshen had started the tradition of woodblock print, Choje Ngagwang Tenzin (1522-1590), the reincarnate of Gartoen who was the son of Phajo Drugom Zhigpo, engraved the biography of Phajo Drugom in about 1570 (C.E). Then, in the 17th century Zhabdrung Ngawang Namgyal, having satisfactorily completed all the activities related to the dual system and before he went into the final retreat (i.e. parinirvana), initiated a project to engrave the collected works of the omniscient Pema Karpo (1527-1592) and all the essential ones and its prints are distributed them to all the monasteries and sangha communities as dharma donations. He created of the seat of Je Khenpo as the overall head of sangha monasteries and ecclesiastical affairs and that of Desi, who functioned as the secular head of the country. He had also appointed officials to fit these high-ranking positions. The successive Je Khenpo and Desis ensured the practice, manage and spread of the teachings and the good system of administration, by engraving unlimited number of woodblocks prints in their respective areas which can be seen still today in all the historical monuments. However, due to the advancement of printing technologies, the National Library & Archives of Bhutan is the only institution that is upholding the xylography art in the country while the practice is turned its form to an oral account. For more information https://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874508750347675141

PI00008000

#bhutan #bhutantravel #bhutanculture #유네스코아태무형유산센터 #unesco The Bhutanese tradition of xylography and printing was begun in the 15th century by Terton (Hidden treasure discoverer) Pema Lingpa (1450-1521) and his sons, creating the root of virtues for the wellbeing of both living and dead in the country. Thereafter, the biography of the Terton and his collected works were printed on woodblocks and distributed to his residential monasteries and his patrons both in Bhutan and Tibet. Following the arrival of Zhabdrung Ngawang Namgyal (1594-1651) in Bhutan, the hitherto divided country was united under the main influence of the dual system of governance. Thereafter, the successive abbots of the monastic system and heads of the temporal system and then the successive far-sighted kings of the Wangchuck Dynasty, together with the heads of various other schools of Buddhism have continued to uphold the tradition. Skills training in woodblock making, engraving and printing were facilitated to provide sufficient copies of works on science and crafts, and the biographies and excellent teachings to be distributed to the communities of ordained monks and practitioners, dzongs and temples throughout the country. Therefore, Trashigang in the east, Trongsa in the centre, and Punakha and Paro in the west of the country became popular centres for such activities, until the reign of 3rd King Jigme Dorji Wangchuck (1928-1972). Starting 1970s, however, distribution has entered into a commercial phase, with increasing numbers of scriptural works being offset printed in India and then returned to Bhutan for distribution. At the same time, the interest in and practice of the traditional method of printing on woodblocks have been gradually losing their value among the users. Nowadays, printing machines have been set up in ever increasing numbers countrywide and these can produce, in larger quantities and within a very short time, scriptural volumes and other books that have a clear typeface, and are colourful and pleasing in appearance. On the one hand, this is a clear indication of progress in economic development, but on the other, this has become one of the main reasons for losing the precious heritage of woodblock print, among others. [Transmission method] In Bhutan, the transmission of the knowledge and skills related to Xylography printing is usually undertaken by teaching or engaging the interested candidates in the printing process. The process normally requires two persons for better results, but one person alone can also do the job in cases of urgency when there is no one else available to help. The woodblock is first placed flat on a printing bench. The following steps are followed for printing. For more information please visit https://www.ichlinks.com/archive/elements/elementsV.do?nation=BT&page=1&urlAnchor=txt&elementsUid=13874510342886677176&mode=grid&searchText=printing&orderCd=A&countrys=BT

PI00007998

#bhutan #bhutaneseculture #bhutantravel #유네스코아태무형유산센터 #unesco Dey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combine, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne. The white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose. Generally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing. Perhaps, the paper making art must have been existed in the early centuries, even before the use of words and sentences, when pictures and symbols were used as a means of communication in Bhutan as the Padma chronicles mention that "the king ordered paper to be collected in the land of the Mon." This was when the Dharma King Trisong Detsen (755-804) of invited Guru Padmasambava to Tibet in the 8th century and introduced the Tantric teachings to that land. Having completed the construction of Samye Monastery, translation of Buddha's precepts and commentary texts that are written in Sanskrit were initiated into Tibetan language through Indian pandits and incarnate translators from Tibet, but there was not enough paper in Tibet. So the king imported huge amounts of paper from the southern country (Bhutan), which enabled Tibet to produce many volumes of the scriptures. This means that trade between Tibet and Bhutan was already active at that time. The so-called shog-tang (shog-ltang), a cargo size of 1000 sheets of Daphne paper, were transported to Tibet in large quantities for trade purposes. This means that very early in history, papermaking was passed down from generation to generation, from father to son, from son to son, and so on. Gradually, as the demand for paper increased, the paper industry in the country expanded, especially in the 17th century when great changes took place in the country after the arrival of Zhabdrung Ngawang Namgyal (1594-1651). At that time, the demand for paper increased greatly at the central government, monastic community and monastery levels, leading to a nationwide expansion in the production and use of paper especially for printing purpose. Paper manufacturing units were instituted in Dzongs and employed five people either form the monastic body or from the lay citizens for papermaking. The raw materials such as daphne bark, ash, etc. were supplied by the residents of the respective dzongkhag as tax. The dzongkhag administrations then transported the paper cargoes to the central government and ensured proper remuneration. The skilled workers at the papermaking centers were also appointed from the villages and households in the district, who were exempt from other charges such as labor, fodder, firewood, and pounded rice. A load Shog-tang as mentioned above, was a bundle of 1000 sheets of paper. (Lam Kezang Chophel, 2021). Normally a single sheet of paper measures approximately 75x110 cm and colloquially it is called pheg-pang. Although, papermaking was once a thriving art until 1970 yet, due to the development progress in the country and introduction of imported papers such as books and note books has gradually affected in declining number of paper production centres in the country. For more information https://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874507459569673284

PI00007996

#bhutan #bhutaneseculture #bhutantravel #유네스코아태무형유산센터 #unesco Dey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combine, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne. The white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose. Generally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing. Perhaps, the paper making art must have been existed in the early centuries, even before the use of words and sentences, when pictures and symbols were used as a means of communication in Bhutan as the Padma chronicles mention that "the king ordered paper to be collected in the land of the Mon." This was when the Dharma King Trisong Detsen (755-804) of invited Guru Padmasambava to Tibet in the 8th century and introduced the Tantric teachings to that land. Having completed the construction of Samye Monastery, translation of Buddha's precepts and commentary texts that are written in Sanskrit were initiated into Tibetan language through Indian pandits and incarnate translators from Tibet, but there was not enough paper in Tibet. So the king imported huge amounts of paper from the southern country (Bhutan), which enabled Tibet to produce many volumes of the scriptures. This means that trade between Tibet and Bhutan was already active at that time. The so-called shog-tang (shog-ltang), a cargo size of 1000 sheets of Daphne paper, were transported to Tibet in large quantities for trade purposes. This means that very early in history, papermaking was passed down from generation to generation, from father to son, from son to son, and so on. Gradually, as the demand for paper increased, the paper industry in the country expanded, especially in the 17th century when great changes took place in the country after the arrival of Zhabdrung Ngawang Namgyal (1594-1651). At that time, the demand for paper increased greatly at the central government, monastic community and monastery levels, leading to a nationwide expansion in the production and use of paper especially for printing purpose. Paper manufacturing units were instituted in Dzongs and employed five people either form the monastic body or from the lay citizens for papermaking. The raw materials such as daphne bark, ash, etc. were supplied by the residents of the respective dzongkhag as tax. The dzongkhag administrations then transported the paper cargoes to the central government and ensured proper remuneration. The skilled workers at the papermaking centers were also appointed from the villages and households in the district, who were exempt from other charges such as labor, fodder, firewood, and pounded rice. A load Shog-tang as mentioned above, was a bundle of 1000 sheets of paper. (Lam Kezang Chophel, 2021). Normally a single sheet of paper measures approximately 75x110 cm and colloquially it is called pheg-pang. Although, papermaking was once a thriving art until 1970 yet, due to the development progress in the country and introduction of imported papers such as books and note books has gradually affected in declining number of paper production centres in the country. For more information https://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874507459569673284

PI00007994

#유네스코아태무형유산센터 #bhutanculture #bhutan #ichcap The Art of Calligraphy and writing is not only the fundamental need of academic knowledge but it is also an essential skill required preserving and promoting religious teachings. It not only requires academic intellects but most important the hand-skill of calligraphy. The origin of the calligraphy as per Lam (Spiritual master) Ugyen Tenzin Yoezer, popularly known as Lopen Nado, who was then the Advisor to the Department of Education on Dzongkha Development in Bhutan says that, there was a natural system of using words and phrases in oral communications such as conversations, discussions, and official announcements, consistent with the general practice. Development of the system of communication through the writing of letters and documentation had not been widespread. During the second visit of Guru Padmasambhava to Bumthang was in the 8th century, he was accompanied by one of his 25 principal disciples’ names Denmang Tsemang. At that time Guru Padmasambava gave the sacred teachings of the Secret Mantra to the King Sindhu Raja, but it was said that there was no system of writing in the country that time. So, it was Denma Tsemang who transcribed the transmitted teachings for the King’s practices and thus the beginning of the tradition of writing in Bhutan. Thereafter in the 15th century, Terton Pema Lingpa (1450-5121) transmitted the writing tradition to his heirs until the dawn of 17th century when Zhabdrung Ngawang Namgyal (1594-1651) established the State Government by initiating the Monastic Body where the Calligraphy section (Yig-zoi-de) was particularly set for the monks to impart and learn art of calligraphy. It was necessary not only or writing and learning for oneself but, for the woodblock engraving projects that was thriving in Punakha Dzong initiated mainly for the flourishment of the Buddhist teaching in the country. Later, the art was perpetuated and practiced by the successive Je Khenpos (chief abbot) and Druk Desis (temporal secular rulers) and Monarchs until now. Generally, there are five types of calligraphy writing; U-chen (Block script), U-mey (Headless script), Len-tsa (Rajana script), War-tu (a type of Indian script) and finally the Jog-yig (the typical Bhutanese script). Amongst these scripts, Len-tsa and War-tu scripts are mainly used as decorative scripts, while U-chen is more common in writing Buddhist canons, ritual scripts and even for the formal corresponding letters and Jog-yig script is just for writing formal records and corresponding letters. Regarding U-mey script, though it is rare to its usage bring a Tibetan script but there are some calligraphers knowing how to write. However, the tradition of writing i.e. Calligraphy has been greatly hampered and left on the verge of dying tradition due to the emergence of computer technology and available fonts in the country. Yet, there are still well known and skilled calligraphers which are mostly used by His Majesty’s Kangyur Project for writing Golden Scriptures of Buddhist Canon and even by some individual Spiritual masters which have helped in reviving and revitalizing the art in the country. For more information https://www.ichlinks.com/archive/elements/elementsV.do?nation=BT&page=1&urlAnchor=txt&elementsUid=13874511097589678075&mode=grid&searchText=Calligraphy&orderCd=B&countrys=BT

PI00007991

#bhutan #유네스코아태무형유산센터 #bhutanculture The term Si has dual connotation of referring to the Calligraphy pen as well as to the specific bamboo from which pen is crafted. According to Lopen (master) Wangdi Gyeltshen, a renown calligrapher of Central Monastic Body said that, there is also another reed locally called Tshi-nag (a reed with dark colour at its internode) which is available from Wangdi-tse monastery area in Thimphu. Actually, there is no specific origin of the Si as it came to exist simultaneously with the writing culture in Bhutan. Colloquially, all pens used for writing purposes are called as Myu-gu, which the name derived from its raw material Myug-ma (bamboo or reed). That is why any pen used for writing available in the market today, irrespective of what it is made of are commonly called Myu-gu (literally means reed pen). As there are different types of My-gu, thus, apart from the aforementioned Si, the pens are made from a wild fern called Kyer-ma is called Kyer-myug, and the ones made of quill is dro-myug, the nib made from metal is chag-myug. Similarly, sol-myug made from dead amber or charcoal, a talc stone is cut like a pencil for use -do-myug, the chalk comes in packets and used for educational purposes in schools is sa-myug. There are also pir-myug (brush pen) and lastly, the zha-myug, the lead pencil. Regarding the raw material; in Bhutan, Si is traditionally found at Chagdana in Toepai Gewog (Block) in Punakha, and near the Nag-tshang (Manor) at Drametse. It is also found in Kheng region of Zhemgang and at the Yarphel village of Trashi Yangtse district. Si is highly valued as being blessed by superior beings like Lord Manju Shri, Guru Rinpoche, the five classes of dakinis and the Dharma Lord Drukpa Kunleg (4155-1529). Si grows as big as normal bamboo, with short culm or internode, narrow lacuna and thick culm wall. They grow in heights of more than five arm-span. Both the plant and its leaves are generally yellowish. In ancient times, a writing pen was mainly a painting brush in China and in India it was made from the quill (moulted flight feather) of a peacock or other large bird. It is explained that the pen used traditionally in Tibet and Bhutan was made from the plant species called Si, which has thick nodes and grows mainly at lower altitudes. It is obvious that, if writing tradition is gradually disappearing, both the art of making Si as well as its usage is an inevitable element to be gone together. Due to the booming computing technologies and automatic printing machines, the writing along with Si related practices are being gradually driven out of its existence however, realizing its importance and for its revival, His Majesty’s Golden Scriptures Project and other similar projects being initiated by some individual Spiritual masters had help in revitalization of such tradition as well as involving calligrapher to carry on the writing and Si making culture amidst the emerging sophisticated technologies. For more information https://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874510108445676802

PI00007992

#bhutan #유네스코아태무형유산센터 #bhutanculture The term Si has dual connotation of referring to the Calligraphy pen as well as to the specific bamboo from which pen is crafted. According to Lopen (master) Wangdi Gyeltshen, a renown calligrapher of Central Monastic Body said that, there is also another reed locally called Tshi-nag (a reed with dark colour at its internode) which is available from Wangdi-tse monastery area in Thimphu. Actually, there is no specific origin of the Si as it came to exist simultaneously with the writing culture in Bhutan. Colloquially, all pens used for writing purposes are called as Myu-gu, which the name derived from its raw material Myug-ma (bamboo or reed). That is why any pen used for writing available in the market today, irrespective of what it is made of are commonly called Myu-gu (literally means reed pen). As there are different types of My-gu, thus, apart from the aforementioned Si, the pens are made from a wild fern called Kyer-ma is called Kyer-myug, and the ones made of quill is dro-myug, the nib made from metal is chag-myug. Similarly, sol-myug made from dead amber or charcoal, a talc stone is cut like a pencil for use -do-myug, the chalk comes in packets and used for educational purposes in schools is sa-myug. There are also pir-myug (brush pen) and lastly, the zha-myug, the lead pencil. Regarding the raw material; in Bhutan, Si is traditionally found at Chagdana in Toepai Gewog (Block) in Punakha, and near the Nag-tshang (Manor) at Drametse. It is also found in Kheng region of Zhemgang and at the Yarphel village of Trashi Yangtse district. Si is highly valued as being blessed by superior beings like Lord Manju Shri, Guru Rinpoche, the five classes of dakinis and the Dharma Lord Drukpa Kunleg (4155-1529). Si grows as big as normal bamboo, with short culm or internode, narrow lacuna and thick culm wall. They grow in heights of more than five arm-span. Both the plant and its leaves are generally yellowish. In ancient times, a writing pen was mainly a painting brush in China and in India it was made from the quill (moulted flight feather) of a peacock or other large bird. It is explained that the pen used traditionally in Tibet and Bhutan was made from the plant species called Si, which has thick nodes and grows mainly at lower altitudes. It is obvious that, if writing tradition is gradually disappearing, both the art of making Si as well as its usage is an inevitable element to be gone together. Due to the booming computing technologies and automatic printing machines, the writing along with Si related practices are being gradually driven out of its existence however, realizing its importance and for its revival, His Majesty’s Golden Scriptures Project and other similar projects being initiated by some individual Spiritual masters had help in revitalization of such tradition as well as involving calligrapher to carry on the writing and Si making culture amidst the emerging sophisticated technologies. For more information https://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874510108445676802

PI00005592

Soaking the wood in oil is the traditional way of fumigating it. The process also hardens the wood and saves it from pesticides, rotting and also makes water resistant.

PI00008001

#bhutan #bhutantravel #bhutanculture #유네스코아태무형유산센터 #unesco The Bhutanese tradition of xylography and printing was begun in the 15th century by Terton (Hidden treasure discoverer) Pema Lingpa (1450-1521) and his sons, creating the root of virtues for the wellbeing of both living and dead in the country. Thereafter, the biography of the Terton and his collected works were printed on woodblocks and distributed to his residential monasteries and his patrons both in Bhutan and Tibet. Following the arrival of Zhabdrung Ngawang Namgyal (1594-1651) in Bhutan, the hitherto divided country was united under the main influence of the dual system of governance. Thereafter, the successive abbots of the monastic system and heads of the temporal system and then the successive far-sighted kings of the Wangchuck Dynasty, together with the heads of various other schools of Buddhism have continued to uphold the tradition. Skills training in woodblock making, engraving and printing were facilitated to provide sufficient copies of works on science and crafts, and the biographies and excellent teachings to be distributed to the communities of ordained monks and practitioners, dzongs and temples throughout the country. Therefore, Trashigang in the east, Trongsa in the centre, and Punakha and Paro in the west of the country became popular centres for such activities, until the reign of 3rd King Jigme Dorji Wangchuck (1928-1972). Starting 1970s, however, distribution has entered into a commercial phase, with increasing numbers of scriptural works being offset printed in India and then returned to Bhutan for distribution. At the same time, the interest in and practice of the traditional method of printing on woodblocks have been gradually losing their value among the users. Nowadays, printing machines have been set up in ever increasing numbers countrywide and these can produce, in larger quantities and within a very short time, scriptural volumes and other books that have a clear typeface, and are colourful and pleasing in appearance. On the one hand, this is a clear indication of progress in economic development, but on the other, this has become one of the main reasons for losing the precious heritage of woodblock print, among others. [Transmission method] In Bhutan, the transmission of the knowledge and skills related to Xylography printing is usually undertaken by teaching or engaging the interested candidates in the printing process. The process normally requires two persons for better results, but one person alone can also do the job in cases of urgency when there is no one else available to help. The woodblock is first placed flat on a printing bench. The following steps are followed for printing. For more information please visit https://www.ichlinks.com/archive/elements/elementsV.do?nation=BT&page=1&urlAnchor=txt&elementsUid=13874510342886677176&mode=grid&searchText=printing&orderCd=A&countrys=BT

PI00007999

#bhutan #bhutantravel #bhutanculture #유네스코아태무형유산센터 #unesco The Bhutanese tradition of xylography and printing was begun in the 15th century by Terton (Hidden treasure discoverer) Pema Lingpa (1450-1521) and his sons, creating the root of virtues for the wellbeing of both living and dead in the country. Thereafter, the biography of the Terton and his collected works were printed on woodblocks and distributed to his residential monasteries and his patrons both in Bhutan and Tibet. Following the arrival of Zhabdrung Ngawang Namgyal (1594-1651) in Bhutan, the hitherto divided country was united under the main influence of the dual system of governance. Thereafter, the successive abbots of the monastic system and heads of the temporal system and then the successive far-sighted kings of the Wangchuck Dynasty, together with the heads of various other schools of Buddhism have continued to uphold the tradition. Skills training in woodblock making, engraving and printing were facilitated to provide sufficient copies of works on science and crafts, and the biographies and excellent teachings to be distributed to the communities of ordained monks and practitioners, dzongs and temples throughout the country. Therefore, Trashigang in the east, Trongsa in the centre, and Punakha and Paro in the west of the country became popular centres for such activities, until the reign of 3rd King Jigme Dorji Wangchuck (1928-1972). Starting 1970s, however, distribution has entered into a commercial phase, with increasing numbers of scriptural works being offset printed in India and then returned to Bhutan for distribution. At the same time, the interest in and practice of the traditional method of printing on woodblocks have been gradually losing their value among the users. Nowadays, printing machines have been set up in ever increasing numbers countrywide and these can produce, in larger quantities and within a very short time, scriptural volumes and other books that have a clear typeface, and are colourful and pleasing in appearance. On the one hand, this is a clear indication of progress in economic development, but on the other, this has become one of the main reasons for losing the precious heritage of woodblock print, among others. [Transmission method] In Bhutan, the transmission of the knowledge and skills related to Xylography printing is usually undertaken by teaching or engaging the interested candidates in the printing process. The process normally requires two persons for better results, but one person alone can also do the job in cases of urgency when there is no one else available to help. The woodblock is first placed flat on a printing bench. The following steps are followed for printing. For more information please visit https://www.ichlinks.com/archive/elements/elementsV.do?nation=BT&page=1&urlAnchor=txt&elementsUid=13874510342886677176&mode=grid&searchText=printing&orderCd=A&countrys=BT

PI00007997

#bhutan #bhutaneseculture #bhutantravel #유네스코아태무형유산센터 #unesco Dey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combine, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne. The white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose. Generally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing. Perhaps, the paper making art must have been existed in the early centuries, even before the use of words and sentences, when pictures and symbols were used as a means of communication in Bhutan as the Padma chronicles mention that "the king ordered paper to be collected in the land of the Mon." This was when the Dharma King Trisong Detsen (755-804) of invited Guru Padmasambava to Tibet in the 8th century and introduced the Tantric teachings to that land. Having completed the construction of Samye Monastery, translation of Buddha's precepts and commentary texts that are written in Sanskrit were initiated into Tibetan language through Indian pandits and incarnate translators from Tibet, but there was not enough paper in Tibet. So the king imported huge amounts of paper from the southern country (Bhutan), which enabled Tibet to produce many volumes of the scriptures. This means that trade between Tibet and Bhutan was already active at that time. The so-called shog-tang (shog-ltang), a cargo size of 1000 sheets of Daphne paper, were transported to Tibet in large quantities for trade purposes. This means that very early in history, papermaking was passed down from generation to generation, from father to son, from son to son, and so on. Gradually, as the demand for paper increased, the paper industry in the country expanded, especially in the 17th century when great changes took place in the country after the arrival of Zhabdrung Ngawang Namgyal (1594-1651). At that time, the demand for paper increased greatly at the central government, monastic community and monastery levels, leading to a nationwide expansion in the production and use of paper especially for printing purpose. Paper manufacturing units were instituted in Dzongs and employed five people either form the monastic body or from the lay citizens for papermaking. The raw materials such as daphne bark, ash, etc. were supplied by the residents of the respective dzongkhag as tax. The dzongkhag administrations then transported the paper cargoes to the central government and ensured proper remuneration. The skilled workers at the papermaking centers were also appointed from the villages and households in the district, who were exempt from other charges such as labor, fodder, firewood, and pounded rice. A load Shog-tang as mentioned above, was a bundle of 1000 sheets of paper. (Lam Kezang Chophel, 2021). Normally a single sheet of paper measures approximately 75x110 cm and colloquially it is called pheg-pang. Although, papermaking was once a thriving art until 1970 yet, due to the development progress in the country and introduction of imported papers such as books and note books has gradually affected in declining number of paper production centres in the country. For more information https://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874507459569673284

PI00007995

#유네스코아태무형유산센터 #bhutanculture #bhutan #ichcap The Art of Calligraphy and writing is not only the fundamental need of academic knowledge but it is also an essential skill required preserving and promoting religious teachings. It not only requires academic intellects but most important the hand-skill of calligraphy. The origin of the calligraphy as per Lam (Spiritual master) Ugyen Tenzin Yoezer, popularly known as Lopen Nado, who was then the Advisor to the Department of Education on Dzongkha Development in Bhutan says that, there was a natural system of using words and phrases in oral communications such as conversations, discussions, and official announcements, consistent with the general practice. Development of the system of communication through the writing of letters and documentation had not been widespread. During the second visit of Guru Padmasambhava to Bumthang was in the 8th century, he was accompanied by one of his 25 principal disciples’ names Denmang Tsemang. At that time Guru Padmasambava gave the sacred teachings of the Secret Mantra to the King Sindhu Raja, but it was said that there was no system of writing in the country that time. So, it was Denma Tsemang who transcribed the transmitted teachings for the King’s practices and thus the beginning of the tradition of writing in Bhutan. Thereafter in the 15th century, Terton Pema Lingpa (1450-5121) transmitted the writing tradition to his heirs until the dawn of 17th century when Zhabdrung Ngawang Namgyal (1594-1651) established the State Government by initiating the Monastic Body where the Calligraphy section (Yig-zoi-de) was particularly set for the monks to impart and learn art of calligraphy. It was necessary not only or writing and learning for oneself but, for the woodblock engraving projects that was thriving in Punakha Dzong initiated mainly for the flourishment of the Buddhist teaching in the country. Later, the art was perpetuated and practiced by the successive Je Khenpos (chief abbot) and Druk Desis (temporal secular rulers) and Monarchs until now. Generally, there are five types of calligraphy writing; U-chen (Block script), U-mey (Headless script), Len-tsa (Rajana script), War-tu (a type of Indian script) and finally the Jog-yig (the typical Bhutanese script). Amongst these scripts, Len-tsa and War-tu scripts are mainly used as decorative scripts, while U-chen is more common in writing Buddhist canons, ritual scripts and even for the formal corresponding letters and Jog-yig script is just for writing formal records and corresponding letters. Regarding U-mey script, though it is rare to its usage bring a Tibetan script but there are some calligraphers knowing how to write. However, the tradition of writing i.e. Calligraphy has been greatly hampered and left on the verge of dying tradition due to the emergence of computer technology and available fonts in the country. Yet, there are still well known and skilled calligraphers which are mostly used by His Majesty’s Kangyur Project for writing Golden Scriptures of Buddhist Canon and even by some individual Spiritual masters which have helped in reviving and revitalizing the art in the country. For more information https://www.ichlinks.com/archive/elements/elementsV.do?nation=BT&page=1&urlAnchor=txt&elementsUid=13874511097589678075&mode=grid&searchText=Calligraphy&orderCd=B&countrys=BT

PI00007993

#bhutan #유네스코아태무형유산센터 #bhutanculture The term Si has dual connotation of referring to the Calligraphy pen as well as to the specific bamboo from which pen is crafted. According to Lopen (master) Wangdi Gyeltshen, a renown calligrapher of Central Monastic Body said that, there is also another reed locally called Tshi-nag (a reed with dark colour at its internode) which is available from Wangdi-tse monastery area in Thimphu. Actually, there is no specific origin of the Si as it came to exist simultaneously with the writing culture in Bhutan. Colloquially, all pens used for writing purposes are called as Myu-gu, which the name derived from its raw material Myug-ma (bamboo or reed). That is why any pen used for writing available in the market today, irrespective of what it is made of are commonly called Myu-gu (literally means reed pen). As there are different types of My-gu, thus, apart from the aforementioned Si, the pens are made from a wild fern called Kyer-ma is called Kyer-myug, and the ones made of quill is dro-myug, the nib made from metal is chag-myug. Similarly, sol-myug made from dead amber or charcoal, a talc stone is cut like a pencil for use -do-myug, the chalk comes in packets and used for educational purposes in schools is sa-myug. There are also pir-myug (brush pen) and lastly, the zha-myug, the lead pencil. Regarding the raw material; in Bhutan, Si is traditionally found at Chagdana in Toepai Gewog (Block) in Punakha, and near the Nag-tshang (Manor) at Drametse. It is also found in Kheng region of Zhemgang and at the Yarphel village of Trashi Yangtse district. Si is highly valued as being blessed by superior beings like Lord Manju Shri, Guru Rinpoche, the five classes of dakinis and the Dharma Lord Drukpa Kunleg (4155-1529). Si grows as big as normal bamboo, with short culm or internode, narrow lacuna and thick culm wall. They grow in heights of more than five arm-span. Both the plant and its leaves are generally yellowish. In ancient times, a writing pen was mainly a painting brush in China and in India it was made from the quill (moulted flight feather) of a peacock or other large bird. It is explained that the pen used traditionally in Tibet and Bhutan was made from the plant species called Si, which has thick nodes and grows mainly at lower altitudes. It is obvious that, if writing tradition is gradually disappearing, both the art of making Si as well as its usage is an inevitable element to be gone together. Due to the booming computing technologies and automatic printing machines, the writing along with Si related practices are being gradually driven out of its existence however, realizing its importance and for its revival, His Majesty’s Golden Scriptures Project and other similar projects being initiated by some individual Spiritual masters had help in revitalization of such tradition as well as involving calligrapher to carry on the writing and Si making culture amidst the emerging sophisticated technologies. For more information https://www.ichlinks.com/archive/elements/elementsV.do?elementsUid=13874510108445676802

PI00007990

#유네스코아태무형유산센터 #bhutanculture #bhutan #ichcap The Art of Calligraphy and writing is not only the fundamental need of academic knowledge but it is also an essential skill required preserving and promoting religious teachings. It not only requires academic intellects but most important the hand-skill of calligraphy. The origin of the calligraphy as per Lam (Spiritual master) Ugyen Tenzin Yoezer, popularly known as Lopen Nado, who was then the Advisor to the Department of Education on Dzongkha Development in Bhutan says that, there was a natural system of using words and phrases in oral communications such as conversations, discussions, and official announcements, consistent with the general practice. Development of the system of communication through the writing of letters and documentation had not been widespread. During the second visit of Guru Padmasambhava to Bumthang was in the 8th century, he was accompanied by one of his 25 principal disciples’ names Denmang Tsemang. At that time Guru Padmasambava gave the sacred teachings of the Secret Mantra to the King Sindhu Raja, but it was said that there was no system of writing in the country that time. So, it was Denma Tsemang who transcribed the transmitted teachings for the King’s practices and thus the beginning of the tradition of writing in Bhutan. Thereafter in the 15th century, Terton Pema Lingpa (1450-5121) transmitted the writing tradition to his heirs until the dawn of 17th century when Zhabdrung Ngawang Namgyal (1594-1651) established the State Government by initiating the Monastic Body where the Calligraphy section (Yig-zoi-de) was particularly set for the monks to impart and learn art of calligraphy. It was necessary not only or writing and learning for oneself but, for the woodblock engraving projects that was thriving in Punakha Dzong initiated mainly for the flourishment of the Buddhist teaching in the country. Later, the art was perpetuated and practiced by the successive Je Khenpos (chief abbot) and Druk Desis (temporal secular rulers) and Monarchs until now. Generally, there are five types of calligraphy writing; U-chen (Block script), U-mey (Headless script), Len-tsa (Rajana script), War-tu (a type of Indian script) and finally the Jog-yig (the typical Bhutanese script). Amongst these scripts, Len-tsa and War-tu scripts are mainly used as decorative scripts, while U-chen is more common in writing Buddhist canons, ritual scripts and even for the formal corresponding letters and Jog-yig script is just for writing formal records and corresponding letters. Regarding U-mey script, though it is rare to its usage bring a Tibetan script but there are some calligraphers knowing how to write. However, the tradition of writing i.e. Calligraphy has been greatly hampered and left on the verge of dying tradition due to the emergence of computer technology and available fonts in the country. Yet, there are still well known and skilled calligraphers which are mostly used by His Majesty’s Kangyur Project for writing Golden Scriptures of Buddhist Canon and even by some individual Spiritual masters which have helped in reviving and revitalizing the art in the country. For more information https://www.ichlinks.com/archive/elements/elementsV.do?nation=BT&page=1&urlAnchor=txt&elementsUid=13874511097589678075&mode=grid&searchText=Calligraphy&orderCd=B&countrys=BT

PI00005591

Depending on the thickness of the woodblock, two to three hours are needed for the wood to fully absorb the oil.

PI00005590

Traditional Treating and Staking Methods Soaking the carved woodblocks in very hot mustard oil is a traditional way of treating and refining woodblocks for durability.

PI00005589

If the woodblock appears to be fine, a label is carved on the side-face of the left hand-side of the block; it includes the abridged title, volume, and page number of identification. It is then turned into traditional shape for final printing.

PI00005588

Completing the engraving, a draft printing is made to examine the quality of scripts and for proofreading before into a proper woodblock shape. If there are broken scripts, missing words, a mark is put for location. The final step of the engraving is called zug-jab or making a replacement. Again a final editing is done for the authenticity.

PI00005587

9. Reversing the block again, the lines, strokes, and spaces between the scripts have to be made clear and visible and the step is called teg-ju. Normally after teg-ju, the visibility of the scripts appears quite clear; it is called Ched-jey or half-way accomplishment. 10. & 11. Tsug-ju and teg-ju are done repeatedly till the woodblock script appears satisfactorily for printing.

PI00005586

6. 1st step: Using Min-dru, scripts with a circular shape are pierced and made hollow. The skew chisel is used next to pierce upwards along the border of headlines and vowels. This stage is called go-key or making cracks on the side. 7. Reversing the woodblock yig-drui go-key, the shape of headline and vowels is made vivid. 8. Keeping the woodblock in the right position, using the chisel consonants, strokes, and even the dots have to be carved from the left hand side line. This step is called Tsug-ju or piercing.

PI00005585

4. After drying, sprinkle water on the back of the script sheet and rub gently by fingers until the trace of the script is visible in the wood which in result appear like A mirror-image script. 5. Using the tip of chisel, prick deep at all the empty spaces and pour mustard oil over it. It helps to appear clear visibility of the script in addition to softening the wood Keep. The oil should be absorbed totally by the wood.

PI00005584

1. Selection of good quality plank. 2. Preparation of preferred size, smoothen the surface of both the sides and make marginal demarcation to paste the script sheet. 3. Apply glue on the plank surf

PI00005583

Production Process There are series of techniques of traditional production process. occasionally, these are procedures are highly recommended to be followed in order to produce qualitative scripts, beauty and the life durability of the woodblocks.

PI00006855

The term Si has dual connotation of referring to the Calligraphy pen as well as to the specific bamboo from which pen is crafted. According to Lopen (master) Wangdi Gyeltshen, a renown calligrapher of Central Monastic Body said that, there is also another reed locally called Tshi-nag (a reed with dark colour at its internode) which is available from Wangdi-tse monastery area in Thimphu. Actually, there is no specific origin of the Si as it came to exist simultaneously with the writing culture in Bhutan. Colloquially, all pens used for writing purposes are called as Myu-gu, which the name derived from its raw material Myug-ma (bamboo or reed). That is why any pen used for writing available in the market today, irrespective of what it is made of are commonly called Myu-gu (literally means reed pen). As there are different types of My-gu, thus, apart from the aforementioned Si, the pens are made from a wild fern called Kyer-ma is called Kyer-myug, and the ones made of quill is dro-myug, the nib made from metal is chag-myug. Similarly, sol-myug made from dead amber or charcoal, a talc stone is cut like a pencil for use -do-myug, the chalk comes in packets and used for educational purposes in schools is sa-myug. There are also pir-myug (brush pen) and lastly, the zha-myug, the lead pencil. Regarding the raw material; in Bhutan, Si is traditionally found at Chagdana in Toepai Gewog (Block) in Punakha, and near the Nag-tshang (Manor) at Drametse. It is also found in Kheng region of Zhemgang and at the Yarphel village of Trashi Yangtse district. Si is highly valued as being blessed by superior beings like Lord Manju Shri, Guru Rinpoche, the five classes of dakinis and the Dharma Lord Drukpa Kunleg (4155-1529). Si grows as big as normal bamboo, with short culm or internode, narrow lacuna and thick culm wall. They grow in heights of more than five arm-span. Both the plant and its leaves are generally yellowish. In ancient times, a writing pen was mainly a painting brush in China and in India it was made from the quill (moulted flight feather) of a peacock or other large bird. It is explained that the pen used traditionally in Tibet and Bhutan was made from the plant species called Si, which has thick nodes and grows mainly at lower altitudes. It is obvious that, if writing tradition is gradually disappearing, both the art of making Si as well as its usage is an inevitable element to be gone together. Due to the booming computing technologies and automatic printing machines, the writing along with Si related practices are being gradually driven out of its existence however, realizing its importance and for its revival, His Majesty’s Golden Scriptures Project and other similar projects being initiated by some individual Spiritual masters had help in revitalization of such tradition as well as involving calligrapher to carry on the writing and Si making culture amidst the emerging sophisticated technologies.

PI00006854

The term Si has dual connotation of referring to the Calligraphy pen as well as to the specific bamboo from which pen is crafted. According to Lopen (master) Wangdi Gyeltshen, a renown calligrapher of Central Monastic Body said that, there is also another reed locally called Tshi-nag (a reed with dark colour at its internode) which is available from Wangdi-tse monastery area in Thimphu. Actually, there is no specific origin of the Si as it came to exist simultaneously with the writing culture in Bhutan. Colloquially, all pens used for writing purposes are called as Myu-gu, which the name derived from its raw material Myug-ma (bamboo or reed). That is why any pen used for writing available in the market today, irrespective of what it is made of are commonly called Myu-gu (literally means reed pen). As there are different types of My-gu, thus, apart from the aforementioned Si, the pens are made from a wild fern called Kyer-ma is called Kyer-myug, and the ones made of quill is dro-myug, the nib made from metal is chag-myug. Similarly, sol-myug made from dead amber or charcoal, a talc stone is cut like a pencil for use -do-myug, the chalk comes in packets and used for educational purposes in schools is sa-myug. There are also pir-myug (brush pen) and lastly, the zha-myug, the lead pencil. Regarding the raw material; in Bhutan, Si is traditionally found at Chagdana in Toepai Gewog (Block) in Punakha, and near the Nag-tshang (Manor) at Drametse. It is also found in Kheng region of Zhemgang and at the Yarphel village of Trashi Yangtse district. Si is highly valued as being blessed by superior beings like Lord Manju Shri, Guru Rinpoche, the five classes of dakinis and the Dharma Lord Drukpa Kunleg (4155-1529). Si grows as big as normal bamboo, with short culm or internode, narrow lacuna and thick culm wall. They grow in heights of more than five arm-span. Both the plant and its leaves are generally yellowish. In ancient times, a writing pen was mainly a painting brush in China and in India it was made from the quill (moulted flight feather) of a peacock or other large bird. It is explained that the pen used traditionally in Tibet and Bhutan was made from the plant species called Si, which has thick nodes and grows mainly at lower altitudes. It is obvious that, if writing tradition is gradually disappearing, both the art of making Si as well as its usage is an inevitable element to be gone together. Due to the booming computing technologies and automatic printing machines, the writing along with Si related practices are being gradually driven out of its existence however, realizing its importance and for its revival, His Majesty’s Golden Scriptures Project and other similar projects being initiated by some individual Spiritual masters had help in revitalization of such tradition as well as involving calligrapher to carry on the writing and Si making culture amidst the emerging sophisticated technologies.

PI00005582

Sek-chung is normally held by the right hand: the middle finger and the thumb help to it hold firmly; the pointer finger is used to press and the ring finger function as the supporter to the Sek-chung tip. The carving is usually started from the right to the left direction.

PI00005581

However sometimes, woodblocks can also be seem placed on the desk with the left fingers supporting firmly from the left end that aids to produce qualitative woodblock.

PI00006853

The term Si has dual connotation of referring to the Calligraphy pen as well as to the specific bamboo from which pen is crafted. According to Lopen (master) Wangdi Gyeltshen, a renown calligrapher of Central Monastic Body said that, there is also another reed locally called Tshi-nag (a reed with dark colour at its internode) which is available from Wangdi-tse monastery area in Thimphu. Actually, there is no specific origin of the Si as it came to exist simultaneously with the writing culture in Bhutan. Colloquially, all pens used for writing purposes are called as Myu-gu, which the name derived from its raw material Myug-ma (bamboo or reed). That is why any pen used for writing available in the market today, irrespective of what it is made of are commonly called Myu-gu (literally means reed pen). As there are different types of My-gu, thus, apart from the aforementioned Si, the pens are made from a wild fern called Kyer-ma is called Kyer-myug, and the ones made of quill is dro-myug, the nib made from metal is chag-myug. Similarly, sol-myug made from dead amber or charcoal, a talc stone is cut like a pencil for use -do-myug, the chalk comes in packets and used for educational purposes in schools is sa-myug. There are also pir-myug (brush pen) and lastly, the zha-myug, the lead pencil. Regarding the raw material; in Bhutan, Si is traditionally found at Chagdana in Toepai Gewog (Block) in Punakha, and near the Nag-tshang (Manor) at Drametse. It is also found in Kheng region of Zhemgang and at the Yarphel village of Trashi Yangtse district. Si is highly valued as being blessed by superior beings like Lord Manju Shri, Guru Rinpoche, the five classes of dakinis and the Dharma Lord Drukpa Kunleg (4155-1529). Si grows as big as normal bamboo, with short culm or internode, narrow lacuna and thick culm wall. They grow in heights of more than five arm-span. Both the plant and its leaves are generally yellowish. In ancient times, a writing pen was mainly a painting brush in China and in India it was made from the quill (moulted flight feather) of a peacock or other large bird. It is explained that the pen used traditionally in Tibet and Bhutan was made from the plant species called Si, which has thick nodes and grows mainly at lower altitudes. It is obvious that, if writing tradition is gradually disappearing, both the art of making Si as well as its usage is an inevitable element to be gone together. Due to the booming computing technologies and automatic printing machines, the writing along with Si related practices are being gradually driven out of its existence however, realizing its importance and for its revival, His Majesty’s Golden Scriptures Project and other similar projects being initiated by some individual Spiritual masters had help in revitalization of such tradition as well as involving calligrapher to carry on the writing and Si making culture amidst the emerging sophisticated technologies.

PI00005580

Tools Holding Techniques Traditionally in Bhutan, the woodblock is kept rested horizontally on the left hand arm and holds firmly by its three middle fingers from the bellow end. While the thumb and little finger supports from the either sides.

PI00005579

Besides Sek-chung and Min-dru, there are also other tools crucially necessary for the art. To mention these; Tag-pai Shing, jeli (plane) and Sok-som (sandpaper) to smoothen the plank, Par-yig (script sheet), Pyin (glue) to paste the script, Sek-chung, Min-dru, Dar-do (whetstone) to sharpen the tools, Pe-kar mar-khu (mustard oil) to soften the wood, phag-ze (brush) to clean he surface, and Chu-rey (damp cloth) to cover the woodblock.

PI00005578

Min-dru is another important engraving tool mainly used for making a hole and carving curve shaped syllebles such as; O-shaped or half-circular-shaped scripts. Min-dru is like a fluted chisel and it has similar length and decorations like Sek-chung.

PI00005577

Sek-chung is the main engraving tool made of a good quality metal, handle of soft wood and with a metal ring to prevent the handle from cracking the handle. It is similar to the skew chisel with pointy slanted tip. These appears in various sizes depending on the size of scripts.

PI00005576

Engraving Tools Every country who have the woodblock engraving art has distinctive engraving tools with different shapes and even size which are solely depended on the respective scripts they use.

PI00005575

Betule utilis tree is grown abundantly at elevations of 4,800 to 3,000 meters above sea-level along with Junipers, conifers, and rhododendrons. It grows as high as 15 to 25 meters approximately. The leaf measures 3 to 10 centimeters long with paper-like maroon bark.

PI00005574

In Bhutan, artists normally prefer la-tag or tag-pa shing, betule utilis due to mass availability of the resources and considering the quality of engraving compared to other woods.

PI00005573

Normally, hardwood such as la-tag (birch; betule utilis), lung-tag (birch; betula alnoides), Tsen-den (cypress; cupressus corneyana), Ta-go (walnut; Juglans regia), etc. are often used for engraving.

PI00005572

Wood Selection According to the climatic conditions and the vegetation, different woods are preferred for engraving in the central Asia region.

PI00005571

The wind helps to flutter the prayer flags and it is believed that fluttering of flag is similar to reading and recitation of prayers. It not only helps to liberate the deceased souls, magnetizing one's fortunes but also the wind touching the prayer flags turns to holy air, purifying the rest of the place benefiting sentient beings in realizing the Buddhahood nature by mere feeling of the air.

PI00006864

Dey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combines, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne. The white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose. Generally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing. Perhaps, the paper making art must have been existed in the early centuries, even before the use of words and sentences, when pictures and symbols were used as a means of communication in Bhutan as the Padma chronicles mention that "the king ordered paper to be collected in the land of the Mon." This was when the Dharma King Trisong Detsen (755-804) of invited Guru Padmasambava to Tibet in the 8th century and introduced the Tantric teachings to that land. Having completed the construction of Samye Monastery, translation of Buddha's precepts and commentary texts that are written in Sanskrit were initiated into Tibetan language through Indian pandits and incarnate translators from Tibet, but there was not enough paper in Tibet. So the king imported huge amounts of paper from the southern country (Bhutan), which enabled Tibet to produce many volumes of the scriptures. This means that trade between Tibet and Bhutan was already active at that time. The so-called shog-tang (shog-ltang), a cargo size of 1000 sheets of Daphne paper, were transported to Tibet in large quantities for trade purposes. This means that very early in history, papermaking was passed down from generation to generation, from father to son, from son to son, and so on. Gradually, as the demand for paper increased, the paper industry in the country expanded, especially in the 17th century when great changes took place in the country after the arrival of Zhabdrung Ngawang Namgyal (1594-1651). At that time, the demand for paper increased greatly at the central government, monastic community and monastery levels, leading to a nationwide expansion in the production and use of paper especially for printing purpose. Paper manufacturing units were instituted in Dzongs and employed five people either form the monastic body or from the lay citizens for papermaking. The raw materials such as daphne bark, ash, etc. were supplied by the residents of the respective dzongkhag as tax. The dzongkhag administrations then transported the paper cargoes to the central government and ensured proper remuneration. The skilled workers at the papermaking centers were also appointed from the villages and households in the district, who were exempt from other charges such as labor, fodder, firewood, and pounded rice. A load Shog-tang as mentioned above, was a bundle of 1000 sheets of paper. (Lam Kezang Chophel, 2021). Normally a single sheet of paper measures approximately 75x110 cm and colloquially it is called pheg-pang. Although, papermaking was once a thriving art until 1970 yet, due to the development progress in the country and introduction of imported papers such as books and note books has gradually affected in declining number of paper production centres in the country.

PI00005570

Normally for Dhar-par printing five different fabric colors; white, yellow, red, green and blue are used. These colors represent five elements while cloth is purposefully used for the durability. The prayer flags are either attached to a pole and hoisted on the hills or stitched on a rope and hung on the tree branches, across the cliffs, bridges' railing, and in the sacred places.

PI00006845

Dey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combines, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne. The white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose. Generally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing.

PI00005569

History records that Bhutan has some the popular printing house between 17th to 19th century. These were Pung-thang (Punakha Dzong) and their publications were called Pung-thang parma, Choe-tse (Trong sa Dzong), Choe-tse par-ma and Tra-shi gang (Trashigang Dzong), Tra-shi gang parma with unique mark of identity.

PI00006844

Dey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combines, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne. The white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose. Generally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing.

PI00006843

Dey-zo is an art of manufacturing paper using an indigenous plant locally called Dey-shing (Daphne: ). The term Dey refers to Daphne and zo is an art therefore, when these two words combines, an art of Daphne i.e. making paper out of Daphne pant bark. Though there are more than 21 different types of Daphne species- for paper making purpose in Bhutan are of two types; Dey-kar, white Daphne and the other is Dey-na, black Daphne. The white Daphne grows up to four or five metres in height and has pale green oval shaped leaves and greyish bark. Its flowers are yellow at the top so they look generally yellowish, though the stems are whitish in colour. They produce a pleasant odour. White Daphne grows in Bhutan from an altitude of 1,500 to 3,500 metres in huge groves on the edge of open meadows and forests. The black Daphne, on the other hand, grows from 500 to 3,000 metres above sea level. Unlike the white Daphne, it grows as individual plants, scattered along the forest floor. Though the colour of bark is greyish, the flowers are somewhat brownish. Papers made from black Daphne are considered to be the best for its long lasting and Thsar-sho paper specially manufactured by using bamboo mat frame are normally used for writing purpose. Generally Dey-sho comes in two different types; Tshar-sho and Re-sho. Tshar-sho is made by using a special bamboo crafted mat frame while the latter is a produce from cloth frame though both the papers’ raw materials are either white or black Daphne plant bark. However, upon the demand, paper makers also makes blue or indigo paper (Sho-na or Thing-sho) using the tshar-sho making techniques for gold script writing.